Some FX-9370 results

What kind of water cooling does this come with? The Newegg link doesn't show much.
 
I bought my 9370 for 189 with the cooler. Its the exact same thing as my Antek kuhler 920. So I did not use it. This things runs about the same temps as my 8350 both stock. If I clocked my 8350 at 4.4 then it would run hotter than this 9370 is stock. Fact is these two new chips are better than an 8350 or 8320 if you care about volts and temps. It is not always better to just get an 8350 BECOUSE its the same thing when I see it is not. Its just a better chip.
 
Good to hear. The 9370 looks like a good buy at today's prices.
 
I bought my 9370 for 189 with the cooler. Its the exact same thing as my Antek kuhler 920. So I did not use it. This things runs about the same temps as my 8350 both stock. If I clocked my 8350 at 4.4 then it would run hotter than this 9370 is stock. Fact is these two new chips are better than an 8350 or 8320 if you care about volts and temps. It is not always better to just get an 8350 BECOUSE its the same thing when I see it is not. Its just a better chip.

Sounds real tempting if I could get it at that price. Have you tried to oc it ? My 8120 has been good to me but even on water can't get past 4.5 without putting some high voltage to it and it is still not stable all the time.
 
I bought my 9370 for 189 with the cooler. Its the exact same thing as my Antek kuhler 920. So I did not use it. This things runs about the same temps as my 8350 both stock. If I clocked my 8350 at 4.4 then it would run hotter than this 9370 is stock. Fact is these two new chips are better than an 8350 or 8320 if you care about volts and temps. It is not always better to just get an 8350 BECOUSE its the same thing when I see it is not. Its just a better chip.

Its the exact same silicon/design. The 9370/9590 are capped at 220w TDP which helps keep temps under control at those high speeds at the expense of multithreaded performance. With APM Master mode disabled in the BIOS (to disable the TDP cap) the 8350 and the 9370 are virtually identical when running at the same clockspeed.

I have yet to see an 8320 that couldn't do 4.8 GHz at 1.45v, so its hard to justify paying more. Even if you only make it to 4.5 its a great value. If you want to spend more an Intel chip usually makes more sense.
 
Agreed with DeathFromBelow. The 9000 series are even from the same stepping as the other Vishera chips. If there is any difference, it is purely from the inherent nature of every piece of silicon being different. There are some 8320's that will OC a bit higher than some 8350's, for example. It's always random what you will get.
 
Reality is, most people are not going to get 4.7 GHz or better on an 8320 or 8350. At the price the 9370 is now, it really is a no brainer what to go with. My 8350 hit the wall at 4.6GHz, my 8320 is at 4.4 GHz and I do not see it going much better.

Also, before you get on the that is your experience only, you may want to look around a bit. Even for those who look at HardOCP as the defacto standard for benching, they could not get above 4.6GHz either as far as I can remember. Yes, the 9370 and 9590 are not exactly the same but are a bit better binned for the speeds they run at.
 
Which would still explain why both still have hardly any OC headroom at all. If the couple hundred MHz is worth the premium you pay, then that's on whomever decides to buy these.
 
FX will be great at some point like APU is already starting to be however Phenom already was just needed further refining which would have helped them eek out what they could with the FX series as well.

How do you know all those Phenoms needed was just some good ol' ambiguous 'refining'? Are you a computer engineer?
 
Phenom and K10 hit the wall of performance for that uarch. There wasn't much room for improvement. This is why AMD rushed out Bulldozer v2 as quickly as they could back in 2011, because they were aware of this. Even though Llano (K12) was Enhanced-Stars, and was on 32nm, and was 6~7% faster than even Phenom II w/ L3 cache clock for clock, it couldn't clock that high at all. It topped out at 3.5~3.6 GHz regardless of what you did. It wasn't just yield issues. There was no point in going forward with it.

This why all the people around the web going on about "they should scrap FX and go back to Phenom III!!" are ridiculous. Besides, the Bulldozer architecture in general is actually a fantastic design and concept. The only problem was the initial implementation. K10/K12 topped out and was done -- you could only do so many derivatives of K7 before you hit that wall. Meanwhile, Bulldozer has immense amounts of room for improvements. I'm sure AMD will keep this design even after Excavator in 2015.

Intel with their current Pentium III derivatives, however heavily-modified they are, have been seeing 5% increases ever since SB hit. Core 2 to SB was big. SB to IB was marginal. IB to Haswell was marginal Haswell to Broadwell will be marginal. The reason this is, is because they too are hitting their wall. This is but one reason why Intel has been focusing on lowering power consumption these past few years. It's all they can do besides using their own fabs to spend tons of cash on new process nodes. They are focusing on mobile which is what AMD are also doing, because that's where a large portion of the money lies.

Meanwhile, going from Phenom II to Llano was pretty marginal and that was it. Going from Bulldozer to Piledriver was 10~20%. Since Steamroller (now bdver3b since it was delayed and beefed up some) will be another 15~20% increase over PD, you see how this is going.

So no, there won't be a Phenom III because there just doesn't need to be one. K10 was slow, hot, and now a waste of time. They have a completely fresh from the ground up uarch which has tons of room for improvement, and they are sticking to it because that's the only sensible thing to do.
 
Bulldozers main fault was caused by the management getting too involved. BD is actually a really good Arch, hopefully Steamroller will show just how good the design can be.
 
Yeah, I remember hearing many accounts about how the engineer's many pleas kept getting ignored. Mismanagement at its finest. Thankfully the current management is awesome, as evidenced by AMD being on a roll lately.
 
the PD batches varied a lot where OC head-room was concerned. there is a massive thread over on overclock.net on this topic.

i think the average speed you could take a 8350 (the 8320 by an large just didn't clock as high) on air is 4.6-4.7Ghz. that's stable speeds with none of the modules falling over in prime.

on water (have mine on 9x120 rads with chipset and gpu block), 4.9 is about the best one can hope for. my chip was in one of the average batches. i cant remember the volts required to hit that, my system is currently under going loop maintenance tho it was close to 1.5v if memory serves.
 
It's the same as what TechSpot said. The 1100T is getting old.
http://www.techspot.com/review/706-splinter-cell-blacklist-benchmarks/page5.html

CPU_001.png

Woohoo look at this game that doesent use more than 3 cores, built on an eight-year-old engine designed for previous-gen consoles! This is a true indication of multi-core hardware and modern software.

Look, I agree with you, the 1100t is getting 'old' but the fact that the 980 phenom II scales pretty linearly with clockspeed competitively with the 1100t even though it has 33% fewer cores... That shows that scaling does not extend beyond 4 cores MAX.
 
Woohoo look at this game that doesent use more than 3 cores, built on an eight-year-old engine designed for previous-gen consoles! This is a true indication of multi-core hardware and modern software.

Look, I agree with you, the 1100t is getting 'old' but the fact that the 980 phenom II scales pretty linearly with clockspeed competitively with the 1100t even though it has 33% fewer cores... That shows that scaling does not extend beyond 4 cores MAX.

http://www.hardocp.com/article/2013...mage_quality_video_card_review/1#.UmKC2RD8wzI

Splinter Cell is updated to DX11 and [H]ardocp showed what was added for the PC version. I thought that I read that the engine was one of the first multithreaded game engines, but I don't feel like scrounging for it.

Also, if you look at the other chart I showed:

http--www.gamegpu.ru-images-stories-Test_GPU-Action-Battlefield_4_Beta-test-bf_4_proz_2.jpg


The 1100T is pathetic. And let's say that Splinter Cell uses 3 or less cores. Going by both charts, when people kept saying don't upgrade from the 1100T because the FX-8150 and FX-8350 can't match the 1100T they were completely wrong. They were talking out of their ass. The first day the new FX chips were released everyone should have ditched the Phenom lineup and upgraded to the FX chips or Intel.

That's what I really wanted to say, but I didn't want to start a shit storm.
 
http://www.hardocp.com/article/2013...mage_quality_video_card_review/1#.UmKC2RD8wzI

Splinter Cell is updated to DX11 and [H]ardocp showed what was added for the PC version. I thought that I read that the engine was one of the first multithreaded game engines, but I don't feel like scrounging for it.

Also, if you look at the other chart I showed:

http--www.gamegpu.ru-images-stories-Test_GPU-Action-Battlefield_4_Beta-test-bf_4_proz_2.jpg


The 1100T is pathetic. And let's say that Splinter Cell uses 3 or less cores. Going by both charts, when people kept saying don't upgrade from the 1100T because the FX-8150 and FX-8350 can't match the 1100T they were completely wrong. They were talking out of their ass. The first day the new FX chips were released everyone should have ditched the Phenom lineup and upgraded to the FX chips or Intel.

That's what I really wanted to say, but I didn't want to start a shit storm.

I agree completely. I wish would have gone with the FX 8150 instead of the 1090T.
 
Remember all the people who used to say Phenom II was faster and better than FX, despite the fact that PII topped out at around 4Ghz max, was hot, and not actually faster than Vishera? I like how even the FX-43xx on the Splinter Cell chart is well above the PII's.
 
IPC is not static,

While it is true that the IPC of thuban, is higher in some work loads, it other it is lower.

FX processors bench and perform better in games.

on another note, I have yet to see many folks buy the 9570 or the 9370 fx processors and try overclocking. They are just overclocked 8350's. Perhaps though Amd binned the snot out of them.
 
IPC is not static,

While it is true that the IPC of thuban, is higher in some work loads, it other it is lower.

FX processors bench and perform better in games.

on another note, I have yet to see many folks buy the 9570 or the 9370 fx processors and try overclocking. They are just overclocked 8350's. Perhaps though Amd binned the snot out of them.

AMD must have let one slip out to you :p nice oc on that 8320. Most 8320-8350 chips don't oc that high, that I have seen. your buying a cpu that is top bin, and paying for it.but don't really see it as a 8350 overclocked. I do agree like most on the forums that they are over priced.
 
IPC is not static,

While it is true that the IPC of thuban, is higher in some work loads, it other it is lower.

FX processors bench and perform better in games.

on another note, I have yet to see many folks buy the 9570 or the 9370 fx processors and try overclocking. They are just overclocked 8350's. Perhaps though Amd binned the snot out of them.

I have done some OC'ing and it is better binned. Able to reach higher clocks with less volts and the NB performs better.

n3ak5u.jpg
[/IMG]

And this is my everyday setting

2uzwk0j.png
[/IMG]

All the scores and screens are available at http://hwbot.org/user/johan45
 
Compared to my sample of an 8350 it really is a gem. The 8350 take 1.476v for 4.64 and I have to leve the busses down.
This 9370 would run cinebench at 5077 with only 1.368v now to me that is amazing.
I know that some don't agree with P95 for stability, that it's "too hard on the CPU" but I call BS on that. When I'm done tweaking it I'll run P95 plus Heaven in a loop to see the effects of heat from my 2 580's. then I know it's stable.

Here we go I found my SS of the 5077

4vnwpt.jpg
[/IMG]
 
Last edited:
Now that's really nice. For an octocore @ 5ghz, 1.36 vcore is really awesome. I wonder if others have had this type of experience. I've changed my opinion on this chip now, I think it's a pretty good value for what it can do, especially so if the rest of them can achieve results like this.
 
I have only seen a limited sample so far but FlanK3r and I were comparing back and forth at Xtremesystems and they were very close. He feel I may have gotten a slightly better pick than he did. He compared it to his 9590 ES that was on loan. I picked this up for $250 CDN when it was on sale and I'm not disappointed. It behaves a lot like the 8350 but it's very sensitive to volts. Too much to the CPU or NB can make it just as unstable as not enough. It's a real balancing act I have found.
 
my 8320 takes 1.45 volts to run 4.8ghz

takes 1.5 volts to run at 5ghz


the 9370 is better binned, but most 8320's and 8350's will hit 5ghz with good cooling and good motherboard.
 
my 8320 takes 1.45 volts to run 4.8ghz

takes 1.5 volts to run at 5ghz


the 9370 is better binned, but most 8320's and 8350's will hit 5ghz with good cooling and good motherboard.

I would say yes and no to that , now that AMD has improved their selection process and are pulling the "good" samples I think you'll have a hard time finding them.
Now the early samples I would agree with, I have seen a few that are nearly par with the 9370 I have, but I have tried 2 different 8350's and neither of them were good " everyday" clockers. Meaning they would hit high clocks but voltage for prime stable at 5.0 was 1.6+ that's just not feasible for anyone. But they both worked as advertised and were sellable as 8350's.
 
When I'm done tweaking it I'll run P95 plus Heaven in a loop to see the effects of heat from my 2 580's. then I know it's stable.

that is exactly what i do to stress test a new build.
 
trying another CH5-Z board this weekend just picked up a 9590 wondering which Bios I will need to Boot to windows
I will get the new motherboard tomorrow I will see what Bios it shipped with, but I don't know what's needed.....any ideas?

thank you
 
My 1100t is enough for now, I'm waiting to see what's around the corner. If AMD bring out a chip that performs like the 9590 only at the 125w (or even more wishful: FM2+ 95w) TDP, I'm selling my setup and upgrading. My current Mobo is not certified to run the FX 83XX chips, but I've plopped one in and it seems to work just fine (brought my PC to work and used an 8350 sample). If AMD can't bring out an awesome 100w chip soon, I'll just buy am 8350 and call it good.
 
My 1100t is enough for now, I'm waiting to see what's around the corner. If AMD bring out a chip that performs like the 9590 only at the 125w (or even more wishful: FM2+ 95w) TDP, I'm selling my setup and upgrading. My current Mobo is not certified to run the FX 83XX chips, but I've plopped one in and it seems to work just fine (brought my PC to work and used an 8350 sample). If AMD can't bring out an awesome 100w chip soon, I'll just buy am 8350 and call it good.

I don't blame you the 1100t is a great chip. At 4.0 the performance would be on par with a 63xx at 4.5-4.6 ish. And if it's agood clocker on good cooling I would have a hard time topping it in benches.
 
My 1100t is enough for now, I'm waiting to see what's around the corner. If AMD bring out a chip that performs like the 9590 only at the 125w (or even more wishful: FM2+ 95w) TDP, I'm selling my setup and upgrading. My current Mobo is not certified to run the FX 83XX chips, but I've plopped one in and it seems to work just fine (brought my PC to work and used an 8350 sample). If AMD can't bring out an awesome 100w chip soon, I'll just buy am 8350 and call it good.

You are already doing better than I ever did with the 1090t I used to have. My biggest mistake was to buy a 1090t when I should have gotten an FX 8150 at launch. However, I think if you went with the 8350, that would be a good call.
 
What's funny is that I am pretty convinced my chip is limited by heat right now. I'm putting through about 1.41v to the chip to get it to run at 275 x 14.5; my Thermaltake Water2.0 extreme keeps it at 61 degrees at 100% fan speed. I'm thinking I have more headroom in this chip for it to reach 4.2 (what my old 955 managed to get just fine at 1.41v), but I don't want to push more voltage through the already dangerously hot chip. I think I just love the Phenom II CPUs too much. I've owned a 550, a 955, a 1055 and my current 1100. I'm stuck in the past and I really should upgrade to something newer. Like I said before, I'm comfortable with the performance for now, I have the willpower to wait it out and see what CPUs AMD has to offer.
 
I think I just love the Phenom II CPUs too much. I've owned a 550, a 955, a 1055 and my current 1100. I'm stuck in the past and I really should upgrade to something newer. Like I said before, I'm comfortable with the performance for now, I have the willpower to wait it out and see what CPUs AMD has to offer.

I love AM3 CPUs too, although i like the Athlon IIs more (i have 3 Athlon IIs, 1 Thuban). For a non gamer like me, they 're perfect performance/price/heat. I 've also a 1090T and in video encoding it is marginally faster than the FX-6300. So if in games it lags behind, it's a programming issue of the game, not of the 1100T.

I think i have a sort of psychological attachment to the AM3s, because i had so fun undervolting with K10Stat and still now that i got the FX, i still can't digest well that they are "modules" and not real cores. I feel more "natural" with the concept of "cores" that the AM3s had...

At any case, for everyday use, even an Athlon II is more than enough for a non gamer and they can usually undervolt to the point they run very cool.
 
Back
Top