• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

SMART in Solaris?

TeeJayHoward

TeeJayHoward

Limpness Supreme
2FA
Joined
Feb 8, 2005
Messages
13,341
Is there a way to determine your hard drive's status in Solaris 11 11/11? I can't seem to find a way to get the readings off SMART in Solaris 11. Specifically, I'm interested in drive temperature. I just had a drive fail out of a pool, and I'd like to know if it's temperature related or not.
 
Are you running napp-it? If so, it will display disk temp, etc. If not, you should be able to compile and install the smartctl stuff from source.
 
I'm running OI151a5 with napp-it/smartctl, and it works with SAS and SATA drives just fine.
 
You try:

smartctl -T permissive -a -d sat /dev/rdsk/XXXXXXXXX

Worked for me on open solaris/solaris with LSI controllers. Did not work with marvel controllers in the sun Xfire 4500 thumpers though.
 
I have to admit I'm running all 6 disks (two sata for rpool and 4 sas in a 2x2 data pool) of an m1015.
 
smartctl -a -d sat,12 /dev/rdsk/xxxxxx
for an onboard intel controller under OpenIndiana 151x.
 
I was quite surprised myself, but on OI it was as straightforward as described here.
 
zrav said:
I was quite surprised myself, but on OI it was as straightforward as described here.
Click to expand...
Well, gcc-dev certainly simplified things. Now if I could only figure out where the blazes the "make install" sent the binary...

edit: /usr/local/sbin.

Ran the command that zrav recommended... Not seeing drive temp. Am I missing something?
Code: 
root@solaris:/# smartctl -a -d sat,12 /dev/rdsk/c5t0d0
smartctl 5.43 2012-06-30 r3573 [i386-pc-solaris2.11] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda XT
Device Model:     ST33000651AS
Serial Number:    9XK08NHS
LU WWN Device Id: 5 000c50 02d5a511e
Firmware Version: CC43
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Mon Jul 30 13:59:52 2012 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  609) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 456) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   119   099   006    Pre-fail  Always       -       205787322
  3 Spin_Up_Time            0x0003   091   076   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       165
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   070   060   030    Pre-fail  Always       -       4306572593
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       5387
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       170
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       8590065666
189 High_Fly_Writes         0x003a   097   097   000    Old_age   Always       -       3
190 Airflow_Temperature_Cel 0x0022   053   046   045    Old_age   Always       -       47 (Min/Max 38/50)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       146
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       189
194 Temperature_Celsius     0x0022   047   054   000    Old_age   Always       -       47 (0 10 0 0 0)
195 Hardware_ECC_Recovered  0x001a   034   004   000    Old_age   Always       -       23742784999610
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       65120294147267
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1708439380
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       3986112035

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

edit2: Nevermind. Found it. Temperature_Celsius is 47*C.
 
Last edited:
You must log in or register to reply here.
Back
Top