Small issue with build

Akram

Weaksauce
Joined
Oct 26, 2005
Messages
105
Well my freind and i have just built 2 identical computers we built them at the same time and they all seem to run perfectly fine its just that mine has a slight annoying issue.
First here are the specs

Sony NEC Optiarc 18X DVD±R DVD Burner With 12X DVD-RAM Write Black E-IDE / ATAPI Model 7170A-0B - OEM


XION Solaris XON-403 Black with Green LED Light Steel ATX Mid Tower Computer Case - Retail



BIOSTAR TFORCE TF520-A2 Socket AM2 NVIDIA nForce 520 MCP ATX AMD


XCLIO GOODPOWER 500W ATX 500W Power Supply - Retail


G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory

AMD Athlon 64 X2 4000+ Brisbane 2.1GHz Socket AM2 Processor Model

bfg 7800gtx

This issue is that compared to the other identical build mine takes much longer to boot.
When i boot mine up it imedietly stalls on a biostar bios load page (looks like a white background with a big green grass lawn with a raised T in it and biostar across the top. not the bios itself kind of hard to explain what this page looks like. in the bottom corner it says press del to enter setup. If i press delete it will go to the bios.
anyway if u leave it for a good min it will eventually go to windows, or you can press ctr+alt+del and it will go directly to windows.

*another sidenote is it bypasses the entire intialize screen im used to seeing when computers boot up. the one that looks dos based i guess and quickly shows ur bios version, prosseser type, ram, checks something then goes directly to windows...

Please help me : ) Also this might be a software issue if so redirect me please.


** EDIT** pressing delete does take you to the bios
 
You might double check the jumper settings on your drives and make sure the master/slave settings are correct.
 
what are the rest of the parts of each system (what drives are you using, make/model, and what drives is your friend using?)??

Turn off the splash screen in the BIOS. It may be under Startup LOGO or something like that. If you hit escape, does it show the POST sequence?
 
post sequence what is that exactly it doesnt show anything it just goes to that green lawn thing with a t i described. The two systems are 100% identical except mine had a 7800 gtx and his is a 7900 gs. My freind actually installed his on a 320 gb ide baracuda i belive which was his freinds temporarly then got a 250gb sata, never had this issue. I dont know my modal exactly without looking at it. its a 200gb wd that ive had for a little while but hasnt givin me any problems.
 
I just looked it up and no i guess it doesn't post. Like instantly goes to the biostar start up page. just have to press delete but you cant even press that and get into the bios.
 
New developments turns out it does post. you just have to press tab from that screen. However posting apprently takes forever. what it does is on the "memory test" portion it seems to say something like this. It has a series of numbers seemingly acsending sequentially from 0- 3000000 very rapidly then when it gets to the end it restarts the count up. After the number reaches 3000000 it repeats again. Then on the third go around it finishes the post and boots windows. Looks something like this


Memory Testing : (acsending numbers) OK 1M Tseg memory

correct me if i'm wrong but that memory test is testing the ram. however the computer and ram all seem to be working fine heres a cpuz pic of my ram configuration.

http://i18.photobucket.com/albums/b127/And1Amir/ccpu-1.jpg
 
There should be a "quickboot" or "fast boot" in your bios options somewhere. I'll check your manual. brb.

Well, your mobo manul isn't online, lol, and the other manuals won't DL for me. So, go through your manual, you should see some options similar to what I mentioned above.
 
well just looking through the bios i found that option.

Now heres the new situation. ive gotten it load directly to post by removing the LOGO screen in the bios.

So i have post beautiful.

Now however if i leave the "quick load" disabled i get a annoyingly long "memory test" and also the option to press esc, and if i do it completes the post almost instantly and goes to windows.

However if i enable "quick load" what it does now is pass the memory test nearly instantly but then goes to the next phase where it sits there blinking saying

"Detecting IDE Drives ..." which after a good min or 2 then goes directly to windows.


***Its interesting to note that when you press ctr+alt+del at this point it immedeitly restarts the computer and has a super fast post. and goes directly to windows.

Also while in windows if u restart it will post fast and go immediatly to windows.**

Im wondering if i should try the "optimised defaults" function in my bios.
 
Make sure your IDE drives jumpers are set properly, as CompuDrew mentioned earlier. If you have two drives, make sure the jumpers are either set to Cable Select, or one is set to master (end of IDE cable) while the other is set to slave (middle of IDE cable). If you only have a single drive, make sure its cable select or master. You could also specify in the BIOS which drives are present, to make detection faster.

Quickboot bypasses all the tests/detection time by using whatever was detected at first boot... all subsequent warm boots will be quick due to the skipping of the tests/detection phases.
 
well i just checked my jumpers and it my dvd drive has been on slave and my hdd has been on master. I changed my hdd to CS and now it would pass both the memory test and detecting ide phase but then would just gimme the whole wait thing. So i waited and it tell me to insert system cd. tryed it again and pressed ctr+alt+del same thing. "insert system disk"

So now im thinking just leave the extended boot on and press escape on the memory test for now. I dunno what the hell could be going on it might the hdd i kinda wanna try it with another hdd and see what happens.

also do u think intialising the "optimized defaults" in the bios might be a good idea?
 
if one of the drives is set to Cable select, both have to be set to cable select.
 
After a little while messing with every little bios option i could think of i finally solved my problem atleast. It had something to do with the computer always trying to find a floppy drive so i turned off the floppy disk controller, and disabled the floppy disk and everything posted like a charm, but thanks for all your help.
 
Back
Top