Silly question about washers

Jedimoto

Limp Gawd
Joined
Sep 11, 2004
Messages
144
The small fiber washers that came with my case are to be used with the Mobo, correct?
If so, then do they go between the Mobo and the standoffs or between the Mobo and the head of the screw?
I know this question may be silly, but this is my first build and I want to make sure I get everything right.
I've already installed the Mobo and it went into the case just fine, but after finishing the job, I remembered the washers. So I guess if the washers go between the Moobo and the Case I've got some work ahead of me. If they are just for the screw, then I can just take each one out one at a time and add on the washer. Are the washers really neccesary?
Anyways, thanks for any help on this.
 
Hi Jedimoto,

They're not absolutely necessary, but if you wish to use them you can place them between the head of the screws and the motherboard. Almost all motherboards I have installed have not required these washers because they have an area around where the head of the screw rests which is designed to act as a 'washer' anyway.

Cheers.
 
Thanks for the reply, halo.
Yeh, my mobo has these little metal circles around the mounting holes, so I'm thinking it's not a big deal. Is it worth taking out the screws and using the washers? Will it even make a difference?
 
I have NEVER used those in all the computers I have built. I don't have as much experience as others, but I have assembled around 20 computers I would say. Oh course, never a problem ;)
 
Normally the stand-offs of the mainboard tray should not pose any risk whatsoever to the mainboard (i.e. shorting stuff out), as long as you check for any 'rogue' stand-offs before mounting the mainboard (old ATX mainboard trays have an extra stand-off which is no longer used in the last couple of revisions, for example).

The mainboard tray also forms an excellent ground plane for the mainboard, the effect of which will be reduced by using washers.

In other words, if anything, washers will have a negative effect on the system's performance.
 
Groovy, then I guess my mobo is installed and ready to go.
SIGH
Now I just need a video card and a monitor and I'm ready to roll.
Thanks for the help, ya'll. :)
 
Back
Top