Should I Worry About These SMART Numbers?

BecauseScience

[H]ard|Gawd
Joined
Oct 9, 2005
Messages
1,047
I have a SMART app that keeps telling me my disks are dying. I've highlighted the stats that the app is complaining about.

It doesn't like non-zero reallocated sector counts and it's telling me that they're a sign of imminent disk failure.

It's also not to happy about 'Airflow_Temperature_Cel" on this first drive.

Seagate Barracuda 7200.11 ST31500341AS
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 225081308
3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 357
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 4
7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 50683172
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4234
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 405
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 100 093 000 Old_age Always - 81605623834
189 High_Fly_Writes 0x003a 031 031 000 Old_age Always - 69
190 Airflow_Temperature_Cel 0x0022 063 045 045 Old_age Always In_the_past 37 (Lifetime Min/Max 23/37)
194 Temperature_Celsius 0x0022 037 055 000 Old_age Always - 37 (0 19 0 0)
195 Hardware_ECC_Recovered 0x001a 041 020 000 Old_age Always - 225081308
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 198 000 Old_age Always - 40

Seagate Barracuda 7200.11 ST31500341AS
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 205928672
3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 339
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 14
7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 53131129
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3982
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 1
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 386
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 100 097 000 Old_age Always - 8590065674
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 126
190 Airflow_Temperature_Cel 0x0022 062 046 045 Old_age Always - 38 (Lifetime Min/Max 23/38)
194 Temperature_Celsius 0x0022 038 054 000 Old_age Always - 38 (0 18 0 0)
195 Hardware_ECC_Recovered 0x001a 041 015 000 Old_age Always - 205928672
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 190 000 Old_age Always - 75

Seagate Barracuda 7200.11 ST31000340AS
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail Always - 195220179
3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 200
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1
7 Seek_Error_Rate 0x000f 069 060 030 Pre-fail Always - 10412538
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 5068
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 561
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Unknown_Attribute 0x0032 100 099 000 Old_age Always - 30065229831
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 065 054 045 Old_age Always - 35 (Lifetime Min/Max 21/35)
194 Temperature_Celsius 0x0022 035 046 000 Old_age Always - 35 (0 17 0 0)
195 Hardware_ECC_Recovered 0x001a 028 022 000 Old_age Always - 195220179
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
 
Run the manfgs test disks in the long mode to put your mind at ease.

I've run long and short SMART tests as well as the Seatools specialized tests. Passes all around! :D

The thing about tests is that they either pass or fail. If your disk is fine now but is likely to fail "soon" they don't tell you anything about that.

My issue is that my SMART app believes that reallocated sector counts indicates failure in the near future. That's what I'm trying to get a handle on. Running tests only tells me about now, not the future.
 
I'm by no means an expert but I wouldn't be concerned by the relocated sector count of 1 or 4.

The one with 14 however..........:(

I have no idea about that airflow thing.

I know the WD Data Lifeguard uses the SMART data for testing and assume other manfgs do the same, so as far as predicting it's got the same info as you but must be predicting it's not in imminent danger?

AFAIK, all HDs have spare sectors to replace those that have gone bad. How many spares or is just one bad make too many to be safe....I dunno. :)

It's really nice to have tools like SMART but sometimes it creates more questions than answers.

I've never seen an article that gives specific info about different manfgs limits on SMART's various attributes but it'd sure be nice to have.

If I were in your shoes and it wasn't too much hassle, I'd probably RMA that drive with 14 buggered sectors.
 
AFAIK, all HDs have spare sectors to replace those that have gone bad. How many spares or is just one bad make too many to be safe....I dunno. :)

it seems like a few 10's of reallocated sectors should be a drop in the bucket on such a large drive...but that's just my gut talking. That's why I posted.

I've never seen an article that gives specific info about different manfgs limits on SMART's various attributes but it'd sure be nice to have.

Yep, and plenty of disks go belly up with no prior warning from SMART.
 
If SMART tells me a disk is about to die, I believe it. I've never had a false positive.

Are those numbers actually exceeding thresholds? If so, replace the disk(s).
 
Maybe someone else will be along to help us two clueless clowns. :D

In the mean time, I'll think I'll have a beer and wait. :)
 
If SMART tells me a disk is about to die, I believe it. I've never had a false positive.

Are those numbers actually exceeding thresholds? If so, replace the disk(s).

Nothing is over a threshold yet. I have one specific SMART app that's telling me that I should worry. Other SMART apps look at my drives and say thery're a-ok.

I was hoping that someone who regularly deals with huge numbers of disks might have some wisdom to pass on.
 
As I understand it, you don't have to worry until individual values pass their threshold and you get an alert. Those values in of themselves possess very little significance when separated from their thresholds.
 
Back
Top