SCSI IDE in a A7N8X... will it work????

bobsaget

Supreme [H]ardness
Joined
Jan 24, 2004
Messages
4,403
I am thinking about upgrading some of my components in my pc... I will be getting an Asus A7N8X-E Deluxe with SATA... Can I still plug my 5400rpm SCSI IDE hard drive into this without buying a seperate pci card or something???


Thank you!
 
SCSI and IDE are two different interfaces. What is a scsi ide drive?
 
oh sorry, i guess it is IDE...

I just read in 3dmark03 that I had an SCSI IDE drive...
 
You will be able to hook the hard drive up to the motherboard. You will need to reinstall Windows when switching the hardware though. It sounds like 3dMark doesn't properly detect your hard drive or the controller that it's on and that is why it's probably saying you have a SCSI IDE hard drive. I've never used 3dMark03 so I don't know how it acts. I know that any hard drives on the onboard RAID controllers on my A7V133 and A7V266-e would show up as SCSI drives. The same things happens with the drives on my PCI IDE add on card.

In other words, you have an IDE drive and it will hook up fine to the IDE controller on the A7N8x-e Deluxe.
 
But the A7N8X Deluxe has 2 x SATA... Are SATA ports backwards compatible with Ide...??
 
SATA and IDE aren't mutually exclusive on motherboards. Most motherboards have both. Still need somewhere to plug in optical drives at least.
 
The blue and black connectors next to the ATX power connector are standard parallel IDE connectors. It looks like the SATA connectors are at the very left side of the board, just under the PCI slots. They are the two little black rectangles.
 
Weird. Are you the same guy usually on the bobsaget account? Just going on the sig specs, he ought to know the difference between a PATA port and a SATA port. As well as the differences between IDE and SCSI devices.

Anyway, for useful reference, look at the third picture in that product's gallery. The skinny red cables are SATA cables, and the big fat ribbons are IDE cables. I think you can figure out for yourself from there which ports on the motherboards go to what types of connectors. ;)
 
Stiletto One said:
Weird. Are you the same guy usually on the bobsaget account? Just going on the sig specs, he ought to know the difference between a PATA port and a SATA port. As well as the differences between IDE and SCSI devices.

Yeah, same guy! :p

I just got into computers in February, so, I have only had one system (pretty much the one in my sig) and this is the only system I have ever built, so I don't know much about other than what I have... :p


Thank you for all your help!
 
Stiletto One said:
Weird. Are you the same guy usually on the bobsaget account? Just going on the sig specs, he ought to know the difference between a PATA port and a SATA port. As well as the differences between IDE and SCSI devices.

I'm not saying this to be a dick, but if your planning on upgrading your system, it would be to your advantage to learn what's in the PC now. Unless your planning a 100% from scratch build, you'll need to know what you have before you know what to buy. Someone who's not sure about the differences between SCSI, IDE, and SATA would scare me if left alone to buy the parts. More often than not, the same person posts another thread asking how to return something because it doesn't work. Open your case up, learn what's in there, and then make your upgrading decisions.
 
Back
Top