• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

RX 480 AIO brackets

S

Streiw

Bad Santa Gifter 2016
Joined
May 9, 2015
Messages
505
I'd like to mount my H55 to my top RX 480, what's the most cost effective solution available that aren't zip ties?
 
Im honestly not sure that a solution is available yet. I know Full blocks are available but that is not what you are going for.
 
{NG}Fidel said:
Im honestly not sure that a solution is available yet. I know Full blocks are available but that is not what you are going for.
Click to expand...


Yeah, I thought about hacking my H55 up and making it into a little custom loop, but that'd be a terribly inefficient use of money. I might have to try the old zip tie method.
 
would it be possible to 3d print something out of abs? I dont have a 480, but the ABS plastic I have should withstand the temps, if someone here is nifty with 3d design software or can rustle up some measurements, I'd be happy to print some prototypes for free...
 
boushidosan said:
would it be possible to 3d print something out of abs? I dont have a 480, but the ABS plastic I have should withstand the temps, if someone here is nifty with 3d design software or can rustle up some measurements, I'd be happy to print some prototypes for free...
Click to expand...
Interesting idea and it be cool to see this happen. You have the printer at home or easy access at work? How much those things and material cost?
 
boushidosan said:
would it be possible to 3d print something out of abs? I dont have a 480, but the ABS plastic I have should withstand the temps, if someone here is nifty with 3d design software or can rustle up some measurements, I'd be happy to print some prototypes for free...
Click to expand...

Hell, that sounds amazing. I'd even pay ya for one. ;D
 
primetime said:
Interesting idea and it be cool to see this happen. You have the printer at home or easy access at work? How much those things and material cost?
Click to expand...

I have a modified printrbot sitting inside an enclosure I built with a pc under it i can remote into and I print using simplify3D, I usually print vaping stuff like my box mods with it. It is by no means an up to date printer but I like to print as a hobby.

probably about 600-700 invested in it, bought it a few years ago, the abs cost 15-30 bucks per roll depending on quality or color. A single roll would probably print a metric fuck ton of these adapter plates/retention brackets.

examples of printer output below:

http://i.imgur.com/EGgIGE8.png

http://i.imgur.com/yf1hJbp.png

http://i.imgur.com/b744Vzn.jpg

http://i.imgur.com/fTVwroK.png

http://i.imgur.com/meC0wT9.png

http://i.imgur.com/mt2XzLu.png

http://i.imgur.com/FNEPIPv.jpg

http://i.imgur.com/uDWW4kL.png

http://i.imgur.com/0dSeBYH.png

http://i.imgur.com/WpnCbwh.png

http://i.imgur.com/X3vHskD.png
 
Last edited:
You must log in or register to reply here.
Back
Top