Replaced MB--loaded Win 7 -- wont boot

wayout2day

Limp Gawd
Joined
Oct 15, 2006
Messages
170
HI---problems with HP motherboard, so we replaced it. Loaded Win 7 and MS Office 2007. Started to update OS and PC shut down according to instruction. Upon rebooting, the PC won't boot into windows.

Tried the normal methods...Setup...boot order...nothing works. I do have screen shots to add to this post if necessary.

Formatted and attempted reinstall several times. Ruled out HDD because it works on other PC's.

HP PAVILION a1700n

Original MB=Asus A8M2N-LA

Replacement MB= PC CHIPS A15G

Is this a BIOS issue ? All connections check out.

any suggestions welcome. I have been through a checklist, buy maybe another list to review for install might help. Seller says MB is fine. But I can still ship back and replace. I just don't want to miss something obvious and pay the restock fee for being a dummy.

thnx
 
you may want to provide the error you're getting.
otherwise, anybody will be shooting in the dark.

"fails to boot" is such a generic issue, that can have many causes.
Knowing the error message can help rule some out.
 
So install goes normally and on the computer rebooting it POSTS ok and on the attempt to load windows exactly what happens/ what do you see ?

Try F8 between POST and windows and try and get it to let you start windows in safe mode. It will be tricky to catch it at the right time but give it a shot. Per above post a more detailed description of what happens would help a lot. A description of the hard drive type and the settings in the bios would help too as well as to what port it is connected to on the motherboard.
 
hmm bios settings maby>? if i remember right you have to have acpi enabled to use vista and 7
 
thanks for the posts....

What I see is the initial screens, then a blank screen with a cursor line in the upper left hand corner.

The boot order shows the hard drive
the setup screen shows the hard drive

I have used these as the primary boot, without success...

the hard drive is sata. I have tried each of the sata ports.

I haven't yet figured out how to post the screen shots. I will work on that.
 
Apparently I cannot post attachments...

first screen:

American Megatrends
AIBIOS (C) 2006 American Megatrends, Inc.
A15G 09/08/2009
CPU : AMD Athlon (tm) 64 X2 Dual Core Processor 3800+
Memory clock = 533 MHz Dual Channel

Press Del to run Setup
Press F11 for BBS POPUS
NVMM ROM Version : 4.082.10
1024MB OK (64MB Shared Memory Size Used)
Auto-Detecting Pri Master..ATAPI CDROM
Auto-Detecting Pri Slave...Not Detected
Auto-Detecting 3rd Master..IDE Hard Disk
Pri Master : TSSTcorpCD/DVDW TW-H652M 0414
Ultra DMA Mode-2
3rd Master : Samsung SP2504C VT100-49
ULTRA DMA Mode-6, S.M.A.R.T. Capable and Status OK

this then goes to the second screen which is the blank screen with the cursor.
 
wow manual is craptacular.

Under the bios menu page Integrated Peripherals the item SATA Mode Select what are the options and what is it set too now ?

If IDE try AHCI. If AHCI try IDE. (do a reboot and go in and make sure your change, whatever it was, "sticks" throught the reboot process. )

Let us know what you find and if that did anything.
 
Under Integrated Perhiperals....SATA Mode Select only allows for SATA mode or RAID mode.
 
update....I tried the whole process again with similar results....so I tried XP PRO.

I am having good success, with only one "write to hard drive" error. While loading Avast, I got a message saying that data was lost. I am going to look at the HDD again.

I was on the MB site....there is a BIOS update for WIN 7/ Vista. I am wondering if, let alone how to, I should apply this update.

My main goal here is to determine if the Motherboard is no good. I believe I can still return it.

thanks for the help.
 
Back
Top