Repairing a Video Card?

poopspray

n00b
Joined
Jul 11, 2004
Messages
4
I was wondering if anyone had any information on repairing a video card's electronic components. I did a BIOS flash which slightly fried my ATI 9800 Reg. And neither ATI nor Dell (who sold it) are helping me out.

I don't think it's very common for graphics cards to get repaired. Is it even possible? Has anyone ever gotten theirs repaired? If anyone could tell me what I should do it'd be great. Thanks.
-poop
 
I would yell at dell and you really arent suppose to touch your bios thats why.
 
Install PCI card
Boot
Flash AGP card
Fixed

Unless you physically broke something.
 
Dammit, I can't remember when I reflashed (back to original, because the flash to Pro resulted in artifacts) if I did everything the right way --- I mean obviously I thought I did, but maybe I overlooked something. I'll try and post results.

Edit: Gettin late. I'll post tommorow.
 
there is a reason why is a regular 9800 vs the pro. Memory on the pro is about 100Mhz faster(DDR).

Just take the suggestion of the first post, install a PCI card, then flash the original BIOS Back.
 
I flashed the card with its original BIOS per the proper instructions (http://www.short-media.com/forum/showthread.php?t=3327).

Nope, the card is still displaying artifacts. I've tried other BIOSes and none have worked. I can't get assistance from ATI or Dell, it doesn't seem that the original BIOS has any affect, and there doesn't seem to be any visible damage to the card itself...

What do I do besides trash it and buy a whole new card? Is it possible that anyone besides an ATI tech can repair this?
 
send it back to dell, and obviously dont tell them you flashed the bios :rolleyes:
 
Dealing with Dell can be trouble. They have lots of different customer service but when it comes to actually helping you, they never do. I emailed customer service and went back and forth three or four times getting responses from three or four different reps from India who ended up telling me to buy a new card -- very helpful. I'll try again I suppose.
 
Just RMA it. Flashing the BIOS shouldn't have broke it.
 
flashing the bios with speeds the memory couldn't handle would tho. I flashed my geforce 3 ultra to Ti500 speeds. no dice. I went back to the original bios and it was still showing artifacts. Hope you didn't tell the coppers anything you shouldnt have. If you didn't flash it back and raise some hell.
 
you are pretty screwed unless you can flash it back to the orignal bios (which i doubt if its fried) so don't even bother with those 2 . As far as electric repair forget it unless the problem is a blow path or a simple resolder you would need lots of money to go in and fix on the microscope level whats wrong.
 
Back
Top