Rebuild won't boot?

[Viper87227]

How interesting. I got a new case, and rearrenged my WCing a bit. Other than that, all parts in my PC are exactly the same as they were two days ago. Two days ago, they worked. Now, not so much. Sometimes, ill hit the power button, and it instantly shuts off. Looks like something is shorting out to me. However, other times, it will turn on, but before the board posts, it will just hang. Everything will be on, and all four post leds will be lit, but the board will never even hit the bois, it just sits there. Other times, it will sit there, but the power will "flicker". The LED's on the board will go otu for a half second, as will the leds on my fan controllers, and I can hear the drives spin down and then spin back up. It's odd.


Anyone able to point me in the right direction?

 

[Eshelmen]

is the current rig you rebuilt in your sig?
if so that powersupply is very decent so i wouldnt assume its a psu problem unless it needs to be returned for a new one

possibly something isnt set right?

a cord not all the way connected right to the gpu or maybe the connectors arent set right?

 

[Viper87227]

is the current rig you rebuilt in your sig?
if so that powersupply is very decent so i wouldnt assume its a psu problem unless it needs to be returned for a new one

possibly something isnt set right?

a cord not all the way connected right to the gpu or maybe the connectors arent set right?

Yeah, its whats in my sig, and I know its not the PSU. Its the motherboard doing it, that much im sure of. If I unplug it and jump the PSU, every else runs w/o a hitch.