Rebooting Loop

Niksa

Limp Gawd
Joined
Feb 8, 2005
Messages
228
The computer boots, beeps, then I get the message:
Press <Shift-tab> key to display network boot option.
Press <Home> to boot from local drive.

If neither is selected, it goes to the windows safe mode options.
If safe mode is selected, it loads a bunch of standard windows drivers, files, etc and then I get the message: "Press esc to cancel loading sptd.sys"

No matter what option is selected in ANY step, it eventually loads the windows splash screen and then I get a millisecond blue screen and it reboots.

In cmos, it doesn't detect my Primary or Secondary IDE. It does list the Maxtor harddrive in the boot sequence though. Won't boot from dvd but the dvd gets power.

Memtest is ok - brand new memory. Motherboard is brand new. Windows XP.

Since it's not detecting either IDE should I suspect harddrive failure? What else should I be looking at? :confused:
 
Any thoughts on this possible solution tip?

Take out the drives (all of them) Remove the CMOS battery and also clear out the jumper on the MOBO if there is one on there, don't forget to unplug the system. Wait 30 mins. Then attach the HD to Primary Master and set it to master jumper. Do not use CS. Then add your CD or DVD as Secondary Master. Go into the BIOS and change the clock settings an etc.. Reimage or install a new copy of WinXP Pro. This should work now, I've done it this way many of times.

I found it elsewhere & thought I'd check to see if there's any second opinions.
 
Back
Top