• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Random System Shutdowns

Adamar

n00b
Joined
Feb 11, 2006
Messages
16
I built a brand new system last week. All was well, until this past Sunday. The system started randomly shutting down. When I push the power button it will attempt to start, then again shut down. This will happen a few times, then it will finally muster the strength to boot up. What could the problem be??

My setup is:

DFI Lan Party UT RDX200
AMD FX-60
(2) 1GB sticks of OCZ Platinum DDR500
Western Digital 150GB Raptor
Enermax Liberty
ATI Radeon 1900XTX
 
stupid question, but is the hsf spinning? well, just the fan :p
Try to boot with another psu if you have one.

Is this a clean install of windows?


Also, can you boot the UBCD? Try to test the ram with memtest
 
fuelvolts said:
stupid question, but is the hsf spinning? well, just the fan :p
Try to boot with another psu if you have one.

Is this a clean install of windows?


Also, can you boot the UBCD? Try to test the ram with memtest

The HSF is running. Voltage looks good and steady to the CPU and RAM. Clean install of Windows.

I will try the CD you mentioned and report my findings.
 
Yeah, my first thought is the mem too. Run "Memtest86+" on the UBCD (found in the mainboard tools section).
 
Thats the same problem I had.....


Try removing the side of your case and/or making sure things stay cool.
 
mr-busta said:
power switch prob maybe?

Yeah - that was the problem. I bought a very expensive case - the NZXT Lexa... you'd think they could get something as simple as a power switch to be reliable.

I disconnected the power switch cord, and I'm now using the integrated power button on my motherboard. It's been rock stable for the past few hours now...
 
Back
Top