Random Computer Lock-Ups

Joined
May 28, 2006
Messages
60
I just built a new system from scratch for my dad about two weeks ago. Everything works fine, except one thing - randomly (it seems that way at least) the monitor goes black and the computer locks up, won't respond to input. Then you can hit the reset button and it goes back to working fine. The thing is that it doesn't happen regularly at all, it went a few days without a problem then yesterday and today it did it once. I reset the BIOS to the default settings just to be safe and it didn't help. The only setting I wasn't sure about was the SATA IDE type (options of native ide, legacy ide, IDE->AHCI, and RAID). It defaults to native and i swapped it to legacy (not sure what the difference is). Anyways, that seems to have not helped (in fact it appears that the system is crashing more often with the setting changed). I thought maybe its overheating, but after a crash it was at 40C which isn't hot. The problem is that I can't replicate the problem, nothing seems to really provoke it and its a Foxconn board that doesn't seem to even have a manual (in box or online). I ran Memtest and it didn't send me any errors and I stress tested the CPU to make sure it wasn't that and it ran stable.

The specs follow:
  • Athlon 64 X2 3600+ Brisbane 1.9GHz Socket AM2 Model ADO3600DDBOX
  • Foxconn A690GM2MA-8KRS2H Socket AM2 AMD 690G
  • WINTEC AMPO 1GB (2 x 512MB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Model 3AMD2800-1G1K-R
  • HITACHI Deskstar 7K80 HDS728080PLA380 (0A30356) 80GB 7200RPM SATA 3.0Gb/s Hard Drive
  • And a DVD-ROM drive I had lying around

I'm going to run a hard drive stresser next time I'm there and see if that turns anything up. I'll run memtest again, but i don't think it's that. I also thought that maybe the integrated gfx is acting up or the drivers are just buggy since the 690g is a newer chipset. Anyone had any suggestions on what to test? Thankies.:)
 
when you say it was running at 40c on reboot what where you measuring the cpu?

I would suggest running something stressful, (Orthos or something similar,) to see what your temps really run at. I recently built a system similar to that and with the onboard grfx the north bridge gets really hot; you might want to check your temps there as well.

Sounds like you've eliminated the memory, are going to be eliminating the HDD so orthos/3Dmarks will stress out your CPU/video chip to see if that is your point of failure...

from your description I would lean towards the graphics chip is overheating...
 
I actually ran 3dmark 05 on it and aside from having a horrid framerate it didnt crash or have any problems... The 40c is the CPU I believe.

Now that I think of it, its been somewhat hotter lately so it certainly could be overheating. But at the same time it was doing this when I had it at home and was still trying to get it up and running. What are normal temperatures for the gfx chipset? I have an infrared thermometer that I can use, so where should I measure it? I'm also gonna put in a different video card, see if that makes a difference.
 
I haven't been able to dig up numbers as of yet unfortunately, anyone else out there have any ideas to the temp thresholds for the 690G vid chip?
 
While I agree that it could be overheating, it also doesn't seem that it could be the case. If it was overheating, then wouldn't it happen more often? For a few days they had no problems, then it crashed once yesterday and again once today. Overheating would, I'd think, be a consistent problem that wouldn't happen sporadically. Just my thoughts on the matter. Although the other symptoms reek of the chipset having a problem or the processor (which apparently can operate at much above 40C).

I just remembered that I recall the hard drive being rather warm while I was putting the system together and trying to get this kink worked out. I'll have to temp check that too, and I'll throw in an extra fan If I can manage to.
 
I'm with the system right now, and it turns out that the 40C is the hard drive. I'm stressing it right now and its at about 49C right now. I'm thinking that is the fault for now.
 
if you've got another drive to drop in there it wouldn't hurt, just another way to eliminate another possible pit-fall.
 
Back
Top