RAID on D875PBZ

Cyber Dog

n00b
Joined
Jan 1, 2005
Messages
21
I'm at the end of my rope here...I've been trying to deal with this all weekend with no luck. I previously had three hard drives in my system, 2 sata 1 pata. I just got two new 300gb diamondmax 10 sata disks. My goal was to make these disks RAID 1 as my main system disks and use my other disks as storage. Currently (after two days of fumbling), I've got Win XP Pro working with the two maxtors on the ICH5 on my D875PBZ. The problem is, the system refuses to let me hook up my remaining sata drives. I've got a controller card with a Sil3112 controller in one of the PCI slots that I want to plug the other two sata drives into (non-raid). As soon as I plug one of the drives into it, Windows refuses to boot. I get as far as the black Windows screen, at which point the system reboots. The only way to get into Windows is to unplug the drives from the controller card, at which point Windows loads. Any suggestions would be GREATLY appreciated.
 
what is the bios version? there is a relation to the version of the bios and the version of the option rom used for raid mode. the more recent bios will also have an option to toggle for scanning of options roms, an important setting for the periphial card. you might want to examine one more option that is used. isa bit enabled should be enabled by default, try this setting at disabled. it is rare that this needs to be enabled.

home: http://www.intel.com/design/motherbd/bz/
bios: http://www.intel.com/design/motherbd/bz/bz_bios.htm
product documentation: ftp://download.intel.com/design/motherbd/bz/C3176501.pdf

i would also use the matrix raid driver which is more robust and recent than the previous IAA raid edition. important bios settings for raid operation: ata/ide configuration to enhanced, soft raid support enabled, boot priority to the array [drive], create the array ctrl-i, f6 function to install mass storage driver, install matrix raid array application, chipset drivers [unless service pack 2 is used for the drivers are included already].

home support: http://support.intel.com/support/chipsets/imst/
application: http://downloadfinder.intel.com/scripts-df/Product_Filter.asp?ProductID=1809
f6 driver: http://downloadfinder.intel.com/scripts-df/Product_Filter.asp?ProductID=1809
user manuals (you must read): http://support.intel.com/support/chipsets/imst/sb/CS-012543.htm

i do have this board and i have a good knowledge of bios's and corelogics. i can try to help, however, i am here and you are there. what i posted should help you for fabricating properly.
 
I've got the latest BIOS (P33). I tried upgrading the driver and disabling the ISA bit, but the same problem occurred, as soon as I get to the black XP screen the system reboots as long as the drives are plugged into the PCI card.
 
what brand is the Sil3112 controller card and are you able to go into the bios of this periphial card after post? one last question about this what slot are you placing this in? lets consider apg then the next pci going down is 1. count from there so we will be on the same page.
 
The card is an IWILL IS150-R. Yes, I can get into the card's BIOS during POST where it has options to create/delete arrays. The card is in PCI slot 5 (the bottom slot).

Here's my LATEST experiment with the setup:
-Plug in all drives, 1 pata, 2 sata onboard, 2 sata pci.
-Enter Intel RAID BIOS, remove previous array (reset to single drives).
-Reboot.
-Enter Intel RAID BIOS, create RAID 1 mirror with two drives.
-Reboot
-Boot Windows XP Install CD.
-F6 and load both Intel RAID driver and Sil3112 Driver.
-Enter XP Setup Menu
-Displayed disk options in order:
-Pata Drive
-Sil3112 Drive 1
-Sil3112 Drive 2
-ICH5 Array

-Select RAID Array drive, create partition (NTFS), go for install.
-Install begins, on reboot: "A disk read error occurred. Press ctrl+alt+delete to reboot."
 
Small update: I hid the partitions on the extra drives with Acronis and now setup is continuing at least...

...no good though, after setup completes we're right back to the comp rebooting at the black Windows screen. :mad:
 
sorry, hard was down for a bit and i was unable to post. ok slot five, now anything else populating 1-4? btw,you do know if you want the ich5r array to be c:\ just create the/a partition then exit. restart the windows installation and the ich5r array will be the top of the hierarchy, then pata, etc.. any other information, psu, ram, etc. can be helpful. also, anything connected such as usb devices. please, include this information with next post.
 
I appreciate your help, but I basically gave up on it, for now at least. This is one of my two main computers and I greatly dislike prolonged hardware issues, especially when it comes to storage. I've got alot of important docs and apps on there, and even though I've got backups, the more days I spend with my hands in the case the more likely something will crash/burn/explode on me. So I went with all the drives in non-RAID and I'm using the 2nd drive for more manual backup of the primary drive and the computer's been running fine for days. The new drives are apparently much faster than my old ones regardless of the config. Oh, and if you'd like to see the rather humorus (if not unfortunate) response Intel gave to my issue, see my post here: http://www.hardforum.com/showthread.php?t=851346

Thanks again. :)
 
Back
Top