I'm at the end of my rope here...I've been trying to deal with this all weekend with no luck. I previously had three hard drives in my system, 2 sata 1 pata. I just got two new 300gb diamondmax 10 sata disks. My goal was to make these disks RAID 1 as my main system disks and use my other disks as storage. Currently (after two days of fumbling), I've got Win XP Pro working with the two maxtors on the ICH5 on my D875PBZ. The problem is, the system refuses to let me hook up my remaining sata drives. I've got a controller card with a Sil3112 controller in one of the PCI slots that I want to plug the other two sata drives into (non-raid). As soon as I plug one of the drives into it, Windows refuses to boot. I get as far as the black Windows screen, at which point the system reboots. The only way to get into Windows is to unplug the drives from the controller card, at which point Windows loads. Any suggestions would be GREATLY appreciated.