I'm still far away from beginning my WC setup, but I would like to know what options there are in terms of shrouds. I want to go with a 2x120mm radiator, and I will be using low flow fans. I have an Antec 1080 case (the classic kind with the door). I haven't been able to find a shroud yet, and I am considering the BIP II and 2Fresh's 2x120 radiator.
The radiator placement in my mind goes like this: Radiator in the top 5 1/4 drive bay, sitting flush to the top of the case. Shroud with fans inside of it sits on top of the case (Koolance style). Air will probably be blowing up, so it will be sucking air from the radiator. This way, it should be relatively air tight and effective (yes I realize that the case air is slightly warmer, but this is how I want to do it).
So really, three questions:
1) Will the BIP II fit in my drive bay?
2) Anything wrong with my setup?
3) Where can I find a shroud like this/any other ways of making this work? I have also considered a Radbox but they are ugly and a shroud is even less feasible with it.
Thanks in advance..
The radiator placement in my mind goes like this: Radiator in the top 5 1/4 drive bay, sitting flush to the top of the case. Shroud with fans inside of it sits on top of the case (Koolance style). Air will probably be blowing up, so it will be sucking air from the radiator. This way, it should be relatively air tight and effective (yes I realize that the case air is slightly warmer, but this is how I want to do it).
So really, three questions:
1) Will the BIP II fit in my drive bay?
2) Anything wrong with my setup?
3) Where can I find a shroud like this/any other ways of making this work? I have also considered a Radbox but they are ugly and a shroud is even less feasible with it.
Thanks in advance..