I'm planning on mounting my rad for my wc setup on top my case, and I was wondering would it be easier just to remove everything from my case and then drill the holes or should I drill out the 12 or so rivets in my case and then have to re-rivet it?
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
quick ?
- Thread starter Glyphic
- Start date
Since you are going to be doing the work, which method would be easier for YOU? It's a bit hard for us to determine since we don't know your skill level and what tools you have. Half the people will say one way is easier and half will say the other way is easier, but it is ultimately up to you. I feel that removing everything would be easier, but it might involve more work. Also, that way you don't compromise the structural integrity of the case.
Yeah you definately don't want metal flakes on your components. If you take all your stuff out then it shouldn't be too hard to vacuum up everything when you are done. So it just comes down to how difficult it is to take everything out compared to how difficult it is to drill our your rivets and then rerivet. How much stuff do you have in your case?Glyphic said:tools aren't a problem, I work at a hardware store, my only concern about leaving the panel on is stray bits of aluminum
I would suggest taking everything out then drilling the holes. If you drill out the rivets while everything is still in the case you still run the risk of stray bits of metal getting into your case once you remove the top. Unless you have a way to ensure that no shavings would get inside the case I would recommend against it.