Question about IBM ServeRaid M1015

[paris_k]

Hi all.

I bought that controller already flashed to IT mode, and I was expecting to connect it to my Win10 workstation and see in disk manager individual disks, so I can play with storage spaces. My problem is that I can see the disks in the device manager but nothing in disk manager. Am I missing something or doing something wrong?

Thanks

 

[Mega6]

Selected in the BIOS as a Boot Device?

A windows driver?

https://www.ibm.com/support/home/docdisplay?lndocid=migr-5082161

CTRL-H On Boot

Don't see anything? Move the card into a different slot until you do.

 

[kirbyrj]

I have a regular LSI card flashed to IT mode which is identical to the 1015 and the HDD show up in the Disk Management in Windows 10.

 

[paris_k]

What I found is, although I cannot see the drives in disk management or file manager, when I open the storage spaces from control panel I can see the drives. I can leave with that at the moment.

 

[Stefan75]

You might want to try the P20 driver here...
https://www.broadcom.com/products/storage/host-bus-adapters/sas-9210-8i
download - dirver - LSImpt_SAS_Windows_8.1_Windows_server_2012_R2_P20

 

[rtangwai]

OP, what firmware are you running on the M1015?

 

[paris_k]

Hi guys sorry for the delay to respond, everything sorted it was me being silly. Thanks very much for your time to post.