Sup guys...
Ok so with the upcoming (at this point) "rumored" massive price drop of the Core 2 Quad Q6600, I have pretty much convinced myself that I will be upgrading. As of right now I will be getting the following:
So...my question is mainly for the case. I know people on this forum have worked with it (based on the search results I've found) but is there anything I should know about this case? It is obviously smaller then normal and it's PSU placement is also a little odd.
The motherboard I've used before in a system I built 2 months ago for a friend and I absolutely loved it (as does my manager who also bought the same board.)
...finally for the PSU, anyone know anything about OCZ PSUs? I'm always a little apprehensive about about PSUs from relatively new companies since I almost always use either Thermaltake PSUs.
Now...I since I still have at least 2 months to go (and I really haven't started trying to price it out yet) but can I get some ideas on what I could get for my current setup?
Here's the specs:
(I'll be adding pics of my setup later today or tomorrow when I take some pics)
I should also point out that I found that when 4GB of memory is installed on this mothreboard, the FSB is knocked down to 333FSB (normally is 400FSB.) I'm not sure why it does this...but it was something was also experienced by other users of this board.
Oh and finally...in case all you guys start saying "well Windows 32-bit doesn't support 4GB of memory"...I also use Windows XP x64 when I use 3dsmax and various Adobe apps.
Ok so with the upcoming (at this point) "rumored" massive price drop of the Core 2 Quad Q6600, I have pretty much convinced myself that I will be upgrading. As of right now I will be getting the following:
- Intel Core 2 Quad Q6600
- eVGA 680i SLI mobo (122-CK-NF63-TR)
- Lian Li PC-A05B case
- OCZ ModXStream 780W PSU (OCZ780MXS)
- (4GB total) PNY XLR8 2GB (2 x 1GB) DDR2 800 EPP RAM (REVISED)
- Jaton Geforce 7800GT 256 PCI-e (from my old system)
- Lite-On SATA DVD-ROM & DVD-Burner drives
- 300GB (16MB cache) & 400GB (8MB cache) SATA II HDD (from my old system)
- 3.5" inch bay Memory card reader
So...my question is mainly for the case. I know people on this forum have worked with it (based on the search results I've found) but is there anything I should know about this case? It is obviously smaller then normal and it's PSU placement is also a little odd.
The motherboard I've used before in a system I built 2 months ago for a friend and I absolutely loved it (as does my manager who also bought the same board.)
...finally for the PSU, anyone know anything about OCZ PSUs? I'm always a little apprehensive about about PSUs from relatively new companies since I almost always use either Thermaltake PSUs.
Now...I since I still have at least 2 months to go (and I really haven't started trying to price it out yet) but can I get some ideas on what I could get for my current setup?
Here's the specs:
(I'll be adding pics of my setup later today or tomorrow when I take some pics)
- AMD Athlon 64 X2 3800+ (939) 2.0Ghz
- (4) 1GB Corsair Value Select DDR 400 RAM
- Giga-byte GA-K8N Pro SLI
- DVD-burner (IDE)...(I'll need to double check the specs)
- DVD-ROM (IDE)...(I'll need to check the specs)
- Thermaltake W0057 PurePower 500W PSU (modular & SLi approved)
- (2) Arctic Cooling 80mm SUPER quite case fans (21dB each)
- AMS Gmono CF-2029SW-BK mid-tower case (Steel w/ window)
I should also point out that I found that when 4GB of memory is installed on this mothreboard, the FSB is knocked down to 333FSB (normally is 400FSB.) I'm not sure why it does this...but it was something was also experienced by other users of this board.
Oh and finally...in case all you guys start saying "well Windows 32-bit doesn't support 4GB of memory"...I also use Windows XP x64 when I use 3dsmax and various Adobe apps.