Quad core system feedback + system selling price

jag0

Limp Gawd
Joined
Aug 9, 2005
Messages
308
Sup guys...

Ok so with the upcoming (at this point) "rumored" massive price drop of the Core 2 Quad Q6600, I have pretty much convinced myself that I will be upgrading. As of right now I will be getting the following:


So...my question is mainly for the case. I know people on this forum have worked with it (based on the search results I've found) but is there anything I should know about this case? It is obviously smaller then normal and it's PSU placement is also a little odd.

The motherboard I've used before in a system I built 2 months ago for a friend and I absolutely loved it (as does my manager who also bought the same board.)

...finally for the PSU, anyone know anything about OCZ PSUs? I'm always a little apprehensive about about PSUs from relatively new companies since I almost always use either Thermaltake PSUs.

Now...I since I still have at least 2 months to go (and I really haven't started trying to price it out yet) but can I get some ideas on what I could get for my current setup?

Here's the specs:

(I'll be adding pics of my setup later today or tomorrow when I take some pics)

  • AMD Athlon 64 X2 3800+ (939) 2.0Ghz
  • (4) 1GB Corsair Value Select DDR 400 RAM
  • Giga-byte GA-K8N Pro SLI
  • DVD-burner (IDE)...(I'll need to double check the specs)
  • DVD-ROM (IDE)...(I'll need to check the specs)
  • Thermaltake W0057 PurePower 500W PSU (modular & SLi approved)
  • (2) Arctic Cooling 80mm SUPER quite case fans (21dB each)
  • AMS Gmono CF-2029SW-BK mid-tower case (Steel w/ window)

I should also point out that I found that when 4GB of memory is installed on this mothreboard, the FSB is knocked down to 333FSB (normally is 400FSB.) I'm not sure why it does this...but it was something was also experienced by other users of this board.

Oh and finally...in case all you guys start saying "well Windows 32-bit doesn't support 4GB of memory"...I also use Windows XP x64 when I use 3dsmax and various Adobe apps. :p
 
My motherboard and cpu are the same, but my case is a lian-li v1000 tho. I also have the 4GB of ram but the 800 version rather than the 1066. Can't really comment on the PSU as i've never used that brand before. Plus i went with the A1 revision of the motherboard.
As for what you have now, i'd just stick with it if your going to upgrade in 2 months. Plus if you wait you can spend the money you save on your new setup. :p
Personally, with that cpu and motherboard, i would go for an 8800 (a 320 at the very least) card as i think that 7800 would bottleneck you somewhat. Maybe even a 2900 if you hate nvidia.
Just suggestions tho.
 
Oops...I guess I was a little vague with what I wrote. I will be waiting for the price drop to happen...but if it doesn't happen then I may not upgrade at all.

As for the video card...I don't really play that many PC games in the first place so I'll be fine with the 7800 GT for now. Plus when Crysis comes out there may be another drop and/or specials for DX10 cards so I'll play it by ear.

...and yea I'll be sticking with nVidia...I've never been fond of ATi cards.
 
You don't need DDR2-1066 RAM with a Core2Quad. All you need is DDR2-800. The CPU FSB is quadruple the base fsb, while ram is in twice the base fsb if running in dual channel. So:
Q6600: 9 * 266 = 2.4Ghz, DDR2-533, 1066Mhz effective FSB << Stock
Q6600: 9 * 400 = 3.6Ghz, DDR2-800, 1600Mhz effective FSB << OC'd with water cooling and some luck

Theres no point in running the ram any higher than a 1:1 ratio with the CPU.

Most thermaltake PSUs are junk. The only good quality line they have are the Toughpowers. OCZ just recently bought PC Power & Cooling, one of the best PSU companies around. I havent read anything on that particular model you listed, but check jonnyguru.com for some PSU insight.

I'd say you could probably fetch around $400 or more, depending on how you market it, for your current system.
 
Ah...well if that's the case then I'll look at some of the RAM again and see what there is. Part of the reason why I had originally chosen that particular set of RAM sticks is b/c it was EPP compatible. I was going to try and take full advantage of the board's capabilities (minus SLi) when I went to run nTune for overclocking.

As for Thermaltake? I've had pretty good luck with them in the past in all the systems I've built for various people. But thanks for that web link...hadn't heard of that site before but I'll check it out today.

Thanks...
 
I think when you picked out that power supply all you did was look at the watts. OCZ is a good brand, but I too am apprehensive about their PSU's. I would look elsewhere. Maybe to a Thermaltake 700W 4x+12V rails (56 A on the +12v) and SLi support. But I definatly would not buy an OCZ.

Get maybe a Corsair HX620.

Everything else looks nice, it'll be a sweet system :D
 
ALL TT Power Supplies have been food to me, that statement is BS.

No it isn't BS. The Toughpower series is manufacturered by a different company, at least the 700, 1,000 and 1,200watt units are, and they are known to be superior units. It is also widely known that other Thermaltake units have been junk in the past.

You need to look at their specifications more clearly before saying they are good units. Just because they havne't died on you yet and your system is relatively stable doesn't make them good units. You've just been lucky.
 
Doesn't the saying go, ''Innocent until proven guilty''?

Prove to me their junk before you post on these forums.
 
Doesn't the saying go, ''Innocent until proven guilty''?

Prove to me their junk before you post on these forums.

The phrase "innocent until proven guilty" has nothing to do with it. You do what you like with your money, but for me and I suspect for several people here, computer hardware needs to prove to us that it's not crap. Not the other way around. There is alot of junk out there and I won't buy anything without researching it first. There are many PSU's that don't conform to ATX specifications for ripple and noise. Some PSUs don't even come close to being able to output what they are rated to put out and you'd be a fool to put any of them in your machine. This hardware must PROVE TO ME that it's worth my money and that it's safe to use. Just because yours hasn't started shitting sparks doesn't mean that those units are good. I have installed plenty of Thermaltake units into customer machines only for them to return days later DOA. I do not need to prove to you or anyone else that some of Thermaltake's units older units are junk, I know they are junk. I also do my homework and when I went looking for a new 1KW+ PSU, I chose the Thermaltake Toughpower 1200 because after looking at the data I've seen on the net about it from trusted sources, I knew buying it was the right decision. This decision was made based on hard data. Not some random dude posting in forums claiming that they must be good since they haven't died or caught fire yet. I've seen plenty of Deer power supplies that haven't burst into flames but I know they still could and therefore I don't recommend them.

I posted my opinion about Thermaltake PSUs, and others here can agree and disagree as they choose, but do NOT proceede to tell me to prove shit to you before I post my opinion on a public forum and call something junk because I don't have to.
 
Ok...we get the point...but there is no need to sound like a (pardon my language) arrogant dick about it. Just b/c something is shown to be made differently and of possibly higher quality doesn't mean it won't fail either.

For the record...I've used Thermaltake (NON-ToughPower) PSUs in my last 2 personal systems and they have been rock solid. I've also used them in various other systems I've built for friends, family and others...and so far only one of them has died (within warranty.)

Opinions on the net are always going to vary so there is no need to attack someone over it...it's bad enough that attacking people over political opinions is rampant on the net...let's not bring it here over simple computer hardware.

But thanks for the suggestions...I'll scope around and see what there is.
 
Ok...we get the point...but there is no need to sound like a (pardon my language) arrogant dick about it. Just b/c something is shown to be made differently and of possibly higher quality doesn't mean it won't fail either.

For the record...I've used Thermaltake (NON-ToughPower) PSUs in my last 2 personal systems and they have been rock solid. I've also used them in various other systems I've built for friends, family and others...and so far only one of them has died (within warranty.)

Opinions on the net are always going to vary so there is no need to attack someone over it...it's bad enough that attacking people over political opinions is rampant on the net...let's not bring it here over simple computer hardware.

But thanks for the suggestions...I'll scope around and see what there is.

Wasn't trying to be an arrogant dick about it. I just don't appreciate someone telling me not to post here because he disagrees with me.

In any case, if you've had good experiences with them than great, Theres nothing wrong with that, I wouldn't use them but that's me. I'd go for the Corsair HX520 or HX620, possibly a PC Power & Cooling 610 or Silencer 750 Quad. If you are looking for a mid range power supply, those are some good ones to start with.
 
It's kind of funny that he tells the HardOCP Motherboard editor not to post on the forums...when it is the website he writes for. :confused:

I just checked the PSUs you suggested...pitty that the PC Power & Cooling units aren't modular. The Corsair one's look pretty good though...which leads me to my next question...

I know that Corsair makes solid memory...are their PSUs just as solid? Lately it seems that some RAM companies (like Corsair and Mushkin) have been taking a dive in to the PSU market. Are they reliable units?

Also, are there any other PSU makers you would recommend?
 
It's kind of funny that he tells the HardOCP Motherboard editor not to post on the forums...when it is the website he writes for. :confused:

I just checked the PSUs you suggested...pitty that the PC Power & Cooling units aren't modular. The Corsair one's look pretty good though...which leads me to my next question...

I know that Corsair makes solid memory...are their PSUs just as solid? Lately it seems that some RAM companies (like Corsair and Mushkin) have been taking a dive in to the PSU market. Are they reliable units?

Also, are there any other PSU makers you would recommend?

I have no experience with the Corsair units myself, but I hear nothing but good things about them. Specifically, I believe JonnyGURU and our own Power Supply Editor like them and they are a tough crowd. Also Seasonic's 600Watt unit is excellent. I've seen that one in action on Kyle's rig, and the Silverstone units are really good. Though I had compatibility issues with two of them on the EVGA 680i SLI. I have one of those on my motherboard test bench actually. It's been awesome so far. Though I think that model is discontinued now. I'll have to look at what it is specifically when I get home.
 
I have the Corsair HX520W psu and it's a great! it's rock solid and is great for the price I paid ($79.99). I'm 99.9% sure these Corsair psu are rebadged seasonics which is a great psu maker. As for the poster who was arguing with Dan, I wouldn't trust a (lower end) thermaltake psu in any of my computers or recommend them to a person I'm building a PC for. A psu is one of the MOST IMPORTANT pieces in a computer and needs to be looked into heavily when building a pc, because theres always a chance that thing will take a shit and take the whole pc with it.
 
I have the Corsair HX520W psu and it's a great! it's rock solid and is great for the price I paid ($79.99). I'm 99.9% sure these Corsair psu are rebadged seasonics which is a great psu maker. As for the poster who was arguing with Dan, I wouldn't trust a (lower end) thermaltake psu in any of my computers or recommend them to a person I'm building a PC for. A psu is one of the MOST IMPORTANT pieces in a computer and needs to be looked into heavily when building a pc, because theres always a chance that thing will take a shit and take the whole pc with it.

A power supply is the only component that has the ability to destroy every component in the PC when it fails.
 
A power supply is the only component that has the ability to destroy every component in the PC when it fails.

QFT.

As I said in my earlier post, check jonnyguru.com for more PSU insight:
http://jonnyguru.com/forums/showthread.php?t=1460

Here's the links to the Corsair Reviews:
http://jonnyguru.com/review_details.php?id=32
http://jonnyguru.com/review_details.php?id=28

It's kind of funny that he tells the HardOCP Motherboard editor not to post on the forums...when it is the website he writes for. :confused:

I just checked the PSUs you suggested...pitty that the PC Power & Cooling units aren't modular. The Corsair one's look pretty good though...which leads me to my next question...

I know that Corsair makes solid memory...are their PSUs just as solid? Lately it seems that some RAM companies (like Corsair and Mushkin) have been taking a dive in to the PSU market. Are they reliable units?

They're as good as their OEM supplier. Check reviews to find out who supplies them.

Heh, hilarious, actually. FYI, OCZ just bought PC Power & Cooling, as I mentioned earlier. So, look for some nice PSUs from them in the near future.
 
Thanks...I'll read them in a bit. I've been quite busy at work today so I haven't had much of a chance to read the site yet.
 
I should have actually probably added that I intend to buy a 8800 GTS at some point later this year. I've been hearing that there might be a price drop around the time that Crysis comes out in September.

So whatever PSU I end up getting will have to power that as well as the stuff I previously mentioned.

So anyways...after skimming thru the Jonnyguru website, I noticed that Ultra PSUs seemed to have received pretty good reviews. Has anyone had any experience with them? Good or bad? Oddly though...Newegg doesn't sell them.
 
Any of the PSUs in jonnyguru's recommended list will handle a single GTS fine. In fact, the XClio Goodpower 500W will handle it fine, as well.

The only Ultra PSUs I've used, personally, are the Ultra V-series PSUs (usually FAR for 500W); which are fine for low-mid range systems. The higher end Ultra's seem to be nice, but I have no personal experience with them.
 
A 500W PSU for a Quad core, 2 HDDs, 2 Optical drives, a GTS & Audigy 2 ZS? You sure about that?
 
A 500W PSU for a Quad core, 2 HDDs, 2 Optical drives, a GTS & Audigy 2 ZS? You sure about that?

A quality 500watt PSU should be able to do it. Kyle runs 8 hard drives, an E6300 Oc'ed, an 8800GTX, and a Nautilus all on a 600 Watt Seasonic. He hasn't had any issues as far as I know.

There is a common misconception that you need some rediculous amount of PSU for anything using a G80 card and quadcore and that simply isn't true.
 
Ok so I've revised the system I am looking into building and changed it to this RAM:

PNY XLR8 DDR2 800 2GB (1 x 2GB) EPP RAM (4GB total)

I'm still flipping around at the PSUs you guys have recommended...but any other recommendations anyone has would be great. I should clarify that I am looking for PSU recommendations that are (1) modular (2) sleaved/modded (messy cables are a pet peeve of mine) and (3) something that will give me some breathing room.
 
PNY ram is highly compatible with a variety of motherboards, but I'd choose something else that gets the seal of approval from the [H] community. To this day I've never heard PNY mentioned on this forum in regard to ram and enthusiast machines. If you want 4GB do yourself a favor and get a 2x2GB kit instead of doing 4x1GB modules. You'll be saving yourself alot of headache, trust me.
 
What headaches? I currently have (4) 1GB sticks of DDR 400 RAM and the only problem I had was having to contact Gigabyte customer support to unlock some "hidden" features in the BIOS. I had to press Ctrl+F1 to unlock something that would tell the system to detect all 4GB of memory.
 
What headaches? I currently have (4) 1GB sticks of DDR 400 RAM and the only problem I had was having to contact Gigabyte customer support to unlock some "hidden" features in the BIOS. I had to press Ctrl+F1 to unlock something that would tell the system to detect all 4GB of memory.

In every Gigabyte review I hammer them for the whole Ctrl+F1 load of crap. I've seen other review sites do the same.

Why some of these motherboard manufacturers are completely incapable of listening I'll never know. (Cough, cough, MSI, cough, cough, ASUS, cough, cough Gigabyte.)
 
Back
Top