Quad-Core, Liquid-Cooled Desk

That is pretty cool. Although I would have made the desk thicker to eliminate that PCIE ribbon. I would have also done a slim slot load optical drive too.
 
We could do better...
I'm just pissed that we didn't come up with the idea.

It would be VERY cool though!

And I guess lan parties are out with that right?
 
That's a great idea. Saves space and looks cool, and is probably pretty efficient in cooling terms. Though the lan party part could be hard, though why not carry your "desk" instead of computer, or actually that is the computer? :p
 
We could do better...
I'm just pissed that we didn't come up with the idea.

It would be VERY cool though!

And I guess lan parties are out with that right?

instead of BYOC it's BYOT (bring your own table)



We kinda did come up with the idea I'd say, we had a guy years ago make a computer coffee table like that and more recently we had a guy make a desk similar to that (but made from wood with a large window in the desk).
 
That's pretty cool, but you better have a toggle for those cold cathodes or LED's or whatever is making the light. Lights in a visible case are annoying. Lights shining through the desk would drive me batty. Cool Idea though
 
I want to say it looks cool, but the more I look at it, the more it feels lacking. I mean, all it is is a hollow table with hardware spaced out under the surface.
 
I want to say it looks cool, but the more I look at it, the more it feels lacking. I mean, all it is is a hollow table with hardware spaced out under the surface.


They could have done some cable and tube management also. Stuff's just laying around inside there all messy. Makes the OCD in me flare up. :mad:
 
Certainly just run of the mill components and poor cable management to boot - I guess I just have high standards from being a forum junkie here and seeing all the great work we all do around here over the years. I'd definitely have made it deeper to run the graphics card in standard position, added a slot load drive under the surface, or just used a USB enclosure for it. It is a cool concept, but the [H]ard could have taken it to the next level! Nice of them to give props to Danger Den in the article, though!
 
They could have done some cable and tube management also. Stuff's just laying around inside there all messy. Makes the OCD in me flare up. :mad:

Certainly just run of the mill components and poor cable management to boot - I guess I just have high standards from being a forum junkie here and seeing all the great work we all do around here over the years.

Agreed! Great idea in theory, extremely sloppy execution of wiring.
 
I couldn't concentrate worth a $#itt if that was my work desk... I'll be stairing into it all day long...:D
 
It's a pretty cool concept (assuming it didn't cost $10k), but like many have said, they needed to invest more time into cable management and layout. I think everything is too spaced out, meaning long runs of tubing and custom made cables, which ended up just looking sloppy anyhow. They need to start with a centerpiece--probably the motherboard--and start fitting in components around it like puzzle pieces. As it is, the mobo is way off to the back-right, and the "centerpiece" of it all is a lonely water pump. For cables, they should have run as much of it as possible around the edges or change the base to an aluminum one and run them under that. Or put it within style-conforming tubing with anchors to keep it from looking sloppy.

I'm also not a big fan of lighting these days, especially LED fans, since you generally can't turn them off. And the radiator should have been the focus point, not the fans on it. Also, their idea of integrating the coolant runs into the acrylic is awesome--I wish they hadn't given up on that. Practicality be damned!

Probably the coolest piece to me is the custom touchpad, which barely got any attention at all. Oh, and how do they plug in all of their devices?

I wish they put up some better pictures. Maybe the print magazine will have them--I should check that out, since PM is awesome anyway.
 
The problem with designing the coolant flow through the acrylic in this project is two fold. One issue is shippability. The next thing is this was a side project for Danger Den. They are already at capacity or near capacity meeting their customer (including BFG's) demand for waterblocks. They need more capacity (which they are adding) so they can properly market their awesome line of cases as well. They are adding certain production hardware that will make adding flow paths in the acrylic an easier process. I am working on a project that is similar to the table that takes the basic idea and makes drastic aesthetic and functional improvements (working in tandem with the owners of Danger Den of course).
 
Cool idea, very poor execution. The layout was not well thought out, the wiring is ugly, the tubing looks thrown in wherever, and there was no thought as to airflow, it looks like they just threw in those 2 fans when they realized it was overheating or something. I mean, the exhaust from the PSU is just dumping into the desk, there's nothing to draw it out. And there's no active cooling whatsoever for the hard drives either.

And they used 80/20... ick.

Meh.
 
Cool idea, very poor execution. The layout was not well thought out, the wiring is ugly, the tubing looks thrown in wherever, and there was no thought as to airflow, it looks like they just threw in those 2 fans when they realized it was overheating or something. I mean, the exhaust from the PSU is just dumping into the desk, there's nothing to draw it out. And there's no active cooling whatsoever for the hard drives either.

And they used 80/20... ick.

Meh.

taking note of all the comments here to improve my HTPC design guys. Thanks!
 
PM's wiring SUCKS! You guys could totally smoke them. Apparently they have never seen our Rate My Cables thread. Still going strong since 2004.
 
It may have looked cool for them to put a couple angled holes through the top acrylic and run the tubing out and back in to add a bit of style and help visually integrate what's going on inside the desk with what's going on above it. It wouldn't have worked with their layout, though, but could have looked cool at the back corners or back center.

Oh, and the shape of the acrylic--the way it bows in a bit--is cool. The legs might have looked better with an approach that would look more like an upside-down 7 than an inverted T. Just throwing out some more thoughts and ideas, since it sounds like DarthBeavis is looking to do this thing right. :)
 
If I wasn't lazy, I could do a better job. Rip apart a monitor, create a plexi frame to it, mount it into the desk and make it a flip-up monitor. I'd probably add in a smaller flip-up touchscreen to it also. Strip apart the speakers and mount them into the table frame.

I could make one kickass table, but I'm too lazy for such.
 
That PCIe extension cable looks pretty interesting. I goggled around for a bit but was having a lot of trouble getting more info - where are those available and what are the cons of using one.
 
if that's enclosed, where does all that hot air go? or do those fans suck/vent air out under the desk?
 
That PCIe extension cable looks pretty interesting. I goggled around for a bit but was having a lot of trouble getting more info - where are those available and what are the cons of using one.

The white PCI-E cable with silver backing is from Orbit Micro. I no longer use them. These are the best ones made:

dsc01521l.jpg


I was turned on to them by someone who works for the company that makes them. The company really is more of a large bulk seller so I do not know if they want their name given out or not.
 
Very snazzy desk!! I really like the idea, but as many have mentioned it seems very lacking. Lots of space in there to do some crazy stuff. If they were going through the trouble of water-cooling, they should have done something more creative. I don't have any ideas off the top of my head but it seems like an incomplete project at the moment.
 
Back
Top