q9550 with g31m es2l

dinlee23

Gawd
Joined
Aug 28, 2008
Messages
835
anybody have luck getting this 9550 over 3.5ghz on this mobo without having sum issues.... i had it stable at 3.8 but it wont pass OCCT or prime95. had the vcore at 1.25 (stock) at 3.8ghz and RAM at 2.1 volts but it still wont run prime stable even with higher vcore. i didnt touch VTT though since allot of people say that these chips wont run good with high VTT so i just left it at normal i think its 1.1 at normal voltage. any advice on how i get it past 3.5ghz? i really wanna get this baby up to 4ghz but this board doesnt seem to cut it
 
that will solve my problems but id regret buying a 775 socket mobo when i know its a dead socket... lol. if i can find a cheap one tho i might reconsider... but those p45 gigabytes are about $100+ and for that price i might as well start buying 1156 socket mobos since they'r in the same price range.
 
check the for sale/trade area of the boards, may be able to find a p45 board there pretty cheap(dont limit yourself to gigabyte)
 
The VTT is the FSB voltage. If you ae trying to jack up the FSB, you need to increase the voltage to the FSB. Put it to 1.20 and see if the PC is stable. 1.3 is fine. Bump up the vCore to 1.29 or 1.30 as well. That is where I would start. Enable LLC.
 
I have mine running fine at 3.6ghz, haven't tried any higher, I love the mobo myself. Raise your voltage, 1.34 here I believe with a freezer pro.
 
did u raise the FSB overvoltage termination or did u leave it at normal? i got mine to boot at 3.8 but it wont pass intel burn test :mad:
 
gahh screw it... i give up... lol. well im runnign 3.5ghz with 1.17 vcore as it was in the past.... i hate this s2pid g31 chipset now :mad: lol. btw does any1 here know whats the default VTT of g31 chipsets? cuz i raised the VTT +.2 and i didnt know what the base was. in the intel spread sheet it said it can be 1.1 or 1.2 depending on what processor u have im just curious.
 
You don't need a P45 chipset, you need a higher Vcc (CPU voltage). My P45 MB can't run my Q9550 past 3.4 GHz at stock voltage. You probably need 1.35v on the CPU to be OCCT stable at 3.8 Ghz.
 
That board should be capable of running 1.35V. When I had it it OC'd my Q6600 as far as my P5Q Pro did.
 
gahh screw it... i give up... lol. well im runnign 3.5ghz with 1.17 vcore as it was in the past.... i hate this s2pid g31 chipset now :mad: lol. btw does any1 here know whats the default VTT of g31 chipsets? cuz i raised the VTT +.2 and i didnt know what the base was. in the intel spread sheet it said it can be 1.1 or 1.2 depending on what processor u have im just curious.

Its a 50 dollar motherboard, give the thing a break. I can only ever get as high as 3.75 on my board. Every attempt over that requires too much voltage and i've never had any of them pass intel burn test.
 
Back
Top