• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Pump Control

X

xSDMx

Gawd
2FA
Joined
Apr 21, 2005
Messages
582
I have an RP401X2 with one PMP-400 (Laing DDC 3.25) atm. Unfortunately, the unit is not wired for PWM like Swiftech's MCP35X. How in the world do I quiet this pump? My basic fan controller is problematic because of the pump's startup voltage requirement - I don't want to have to change the speed on startup.

What is the simplest, least expensive way to get this pump running at a lower voltage?
 
I was just looking into this myself. It looks like the only way is to use a high watt fan controller or koolance also makes a 8-12v and a 12-24v pump controller. Either option looks like it will set you back around $40
 
No matter what ya do even a 35X on lowest PWM throttle will not be as silent as a D5 at full throttle.

I'd be very cautious about using those Koolance controllers...it is easy to overheat a 3.25-based pump even under stock wattage at rated top wattage....accidentally sending 24W to it would smoke it
 
You must log in or register to reply here.
Back
Top