Project:PURE

I've posted this project in a couple of other places and thought i'd post it here aswell,the build consists of a Lian Li G70,powder coated white outside,black inside with the roof cut out to house a PA120.3 and the floor cut out to house a PA120.2,window cut out and a few cable management holes.The hardware going inside will be:

Asus P6T Deluxe
Core i7 920
6Gb DDR3 Corsair Dominator 1600MHz
GTX 280
Antec Quattro 1000W PSU
1TB Samsung Spinpoint F1
500Gb Samsung Spinpoint F1

Cooling:

PA120.3
PA120.2
DDC-1T Pro/XSPC Top
DDC-1T Ultra/XSPC Top
2 x Bitspower 5.25 White bay res's
XSPC Delta V3 CPU Block
MIPS Mosfet and dual N/B-S/B Block
Danger Den White UV 3/8"IDx5/8"OD Hose
White Enermax Cluster Fans

Anyway here's the case





Cutouts for the PA120.2 and cable management holes



PA120.3 tapped for M4 bolts and test fitted







Fans and PA fixed to case top







Top fitted back on case



Fitted the fans and fittings to the PA going in the bottom







Rad and fans fitted







Here's the res's i'm using









Got the tops on the pumps,braided and fitted







And the Res's







I'll update this over the next couple of days untill I get to where i'm up to.

 

Thank you

Thank you

Lol,wish I had a bit more

 

No I didn't,they are these,I just peeled the sticker off and cut a new one out of white heavy duty sticky back plastic

I thought i'd make a dust filter for the PA120.3 out of 2mm aluminium,here it is test fitted





Sprayed up and mesh fitted







Fitted to the rad





I got the mobo blocks fitted aswell,here's the board with stock cooling





Heatpipes off









The blocks i'm using,XSPC Delta V3



MIPS mobo blocks







The blocks fitted





Next update tomorrow with the tubing fitted for the first loop.

 

Thanks for the comments everyone,much appreciated

@game14,it's diffuser used in TV lighting,but it also works quite well as a dust filter.

Here's some pics of the first loop tubed up











Fitted in the case and filled

















Thanks for looking,i'll post some pics of the second loop tomorrow

 

Thanks for all the comments everyone,i'm glad you like it so far

I got the second loop done,here's the card,I got this one because of the black back plate





Fitted and tubed up















Ive got an update on the DVD Drive cover and got loads of braiding to do now,but i'm going on holiday tomorrow so it wont be untill next weekend

 

@ vsboxerboy thanks ,just a small update with the DVD drive





Stripped down and primed



Sprayed satin black and reassembled





That's all i've got for now untill I do the braiding.

 

Here's a couple of pics of the PSU before braiding

In keeping with the black and white theme





24 pin plug removed



Murder Mod psycho pack braid





Got to love the personal touch



I'll post pics of the 24 pin braided tomorrow

 

,been a bit busy the past couple of days so heven't had time to upload pics,anyway i've got all the hardwired cables done now,I need to move the plugs on the SATA power cable before I can finish the modular cables,I had hoped to take the braiding right in to the PSU but as you can see it's so tight in there with those heatsinks there just wasn't the space for that volume of braid,so I had to just heatshrink the ends of the bundles,even then it was a struggle to get the cover back on





With the cover back on





8pin Pci-e





24pin





All of them together



PSU fitted in case



And plugged in









Just need to even them out a bit,hopefully I'll get more done over the weekend.

 

Thanks for the comments everyone

I used one of these to get the pins out



Tha 24pin wasn't too bad but the pci-e power were a b***h to get out.

The reservoirs are These,I had to order them from the US.