Separate names with a comma.
Discussion in 'Worklogs' started by l3p, Oct 30, 2010.
pictures seem to be broke
Awesome desk, I love the powder coating job.
Sorry for the downtime of the pictures
Been busy with the PSU's, needed the most efficient way for the cables and the airflow
Also the loop is ready in the backside.
This was a small solution to get as much as possible space for cables next to the psu.
On both sides of the desk a Bitspower mini X-station for fans and molex connections.
Here i had war with the cables a few times
And the main battlefield.
Nice! Anymore updates? I am impatient
if i got some time left ill upload some pictures
It aren't nice pictures cause all you see is cables.
Ill try to make some uv light for you guys
Thanks, The cabling is nice... Even if it looks like spaghetti... Black spaghetti.
Here you go
Made some time free to give a little update.
Still got a lot to do this weekend to be able to update from my main pc
I knew i could get it smaller !
First leds are working.
Also some cables ready for under the mainboard tray.
Further on with the pump-tray and got the reservoir hanging again.
Used the same anti vibration rubber under my HDD's and tray as i use for my glass.
I really love this stuff.
Guess cable management will come later, more and more cables every day
Also a small uv led stroke for the right side fans.
Now also leds in the pumptops.
I like it more then the regular black ones i had.
This photo is with UV leds in it, but thats WAY too purple.
But somehow i cant show it in photo's
So i tried blue leds after that, and i liked it
Next update tomorrow
keep it coming, looks great.
very nice man keep it up!
Looks good. That cable management should be a bit of a chore however!
Wow. Looking good! I did not know the anti vibration rubber actually makes any difference! I will have to give it a try some day.
Took me a full hour to find the combination so i can use 2 SLI pipes for the right pump
Molex plugs on the leds of the mainboard
So ill be busy the rest of the day connecting all these cables
this has got to add to the overall value of your home ;-) in the US it would be a tax write off no?
lol i dunno
What a long week this was
Custom length BP pipes
Bottom also finished.
Time to fill up
Just had to make some pictures.
Back to getting the system up and running
So the rubbers for the glass.
First "backplate" in it's place.
Now find a way to work away the cables for 3 screens.
Wow second boot it was up and running.
I really was happy with this.
And im so glad i was able to disable the red leds of the Killer 2100 by the software.
And some pictures of last night.
This morning went up early again and it was smiling to me
Also very handy those usb connections on Dells
And some more night pictures.
Still some small stuff to do.
Polishing the deskholder and the l3p logo.
And some cables need to be changed.
After that ill borrow a better cam and make some better photo's.
This project build is tremendous.
Very very nice. Superb execution from beginning to end.
This. This has been the only project I have seen so far that I like everything about it! OP, do you still have plans on improving perfection?
Good God! Its amazing, Good work!
damn good job man. can't wait to see more future projects from you!
I'll give you a kidney and a lung for it?
wow. wow wow wow wow. gorgeous
Thanks man !
Thanks alot !
I do still have some plans
Thanks, but first some rest after 8 months of modding
Here a last update before i post pictures from the Canon camera i borrowed from my best friend AJ
Sanded and polished the logo again.
Quite some work.
Don't wanted it to mirror to much.
Freddy from Highflow was my saviour
Sometimes you can't go on cause you miss 1 cable or connector of a few euro's
Thanks Freddy !!
Also ordered some other stuff also for future projects.
Different sizes of M4, next week i get M3 too
Tapped it at the last moment for the bitspower thumbscrews.
And ready to shoot some photo's.
Very nice. Wish I had that kinda patience.
After 8 months im kinda tired of it too
Finally finished !!
Pictures are clickable to 3600x2900
Have fun !
I hope you enjoyed the photo's !
There will still be some small mods inside the d3sk, but first some rest after 8 months of modding
This is utterly amazing. What amazing skill and creativity you have. It is perfectly clean and organized as well. That is one sweet setup my friend.
That is just so incredibly cool. You've done a fantastic job, and congratulations on your build!
Thanks alot guys
That look amazing L3p, great work man.
Amazing work now it's finally time to play some games!
Thanks for taking the time over the past months to share with us, and putting all the work into the forum posts videos and pictures!
Thanks a lot H@RD5 !
All you guys positive reactions kept me going
What fans are those? The green ones? This is freaken amazing sir! Your desk reminds me why I got into modding!
It are the Nanoxia FX 120mm Series.
Because i got some requests i uploaded the pics in original resolution/quality
I do not get impressed very easily but this is one of the coolest things I have ever seen. Great job dude looks awesome.
This is one of the most revolutionary and modern desks I have ever seen. What you did is bring the future here today. It is so........ Avatar.
I love it
congrats btw, looks great.
very borg-ish given the green glow
I'll pay for one of those l3p desks. Really I would.
This takes PCs to another level.
Wow thanks a lot guys !!!!
This really is a crown on my 8 months of work.
You guys could help me with something
Just a small vote so i can start my next build