A while back I mentioned some results I had gotten with my setup but I've decided to do a quick run with some games included so here we go.
Firstly I ran an Idle test, nothing spectacular, I was streaming Youtube at the same time.
Ambient was 21C, with the radiator temperature being 30C so about 9C higher than ambient. Fans where at their minimum speed.
Power draw at the wall was about 48 Watts.
Next up we have Prime95 on 3 Cores with Furmark on 1 Core, this proved to be the most stressfull scenario I could create and is by no means even remotely comparable to a normal load.
Ambient was 21C, with the radiator temperature being 40C so about 19C higher than ambient, Fans where at full blast.
Power draw at the wall was about 285 Watts.
HWInfo64 results seem a little vague, de maximums for CPU temperature are hitting 99C, but the average is 88C, and looking at the current temperatures it jumps from 88C to 97C for 1 second and goes back down.
I this image you can also see how I had my probes for measuring temperatures arranged.
Next up I tested 2 games, Skyrim with +- 200 mods and Far Cry 3.
Ambient was 21C, with the radiator temperature being 47C so about 26C higher than ambient, fans where around 70%. Here can see that H2O-Micro can be small and quiet when playing games.
Power draw at the wall was about 233 Watts.
So with only 50 Watts less power consumed than the Prime95/Furmark run and the radiator being 5C hotter, temperatures are excellent on both the CPU(76C MAX) and GPU(73C MAX)
Ambient was 20C, with the radiator temperature being 46C so about 26C higher than ambient. Fans where at around 70% speed.
Power draw at the wall was about 207 Watts.
Again excellent temperatures and fan speeds while playing a game.
I've also received some samples this week for the kit to check out and test.
Among them a set of fans most of you will recognize instantly.
But first! I orderded some Anti-vandal switches, Both are the same model and have a white led but 1 is a Dot and the other a Ring, let me know which you prefer. I already have a preference, can you tell?
Switches in Off state
Switches in On state
I modeled the switch in CAD and pooped out a render.
And finally I was sent 2 Noctua NF-A9x14 PWM fans by Noctua. These are actually my first Noctua's and I'm looking forward to testing them. I will be comparing them to some other manufacturers but they haven't arrived yet.
Some of my models I download from a website called www.grabcad.com and someone on there already made some Noctua models, but not of the Noctua NF-A9x14 PWM.
So I went ahead and made a CAD model and gave it a lick of paint in 3dsmax. I have to say I'm pretty proud of this model, it's 99% accurate.
That was it for now.
Firstly I ran an Idle test, nothing spectacular, I was streaming Youtube at the same time.
Ambient was 21C, with the radiator temperature being 30C so about 9C higher than ambient. Fans where at their minimum speed.
Power draw at the wall was about 48 Watts.
Next up we have Prime95 on 3 Cores with Furmark on 1 Core, this proved to be the most stressfull scenario I could create and is by no means even remotely comparable to a normal load.
Ambient was 21C, with the radiator temperature being 40C so about 19C higher than ambient, Fans where at full blast.
Power draw at the wall was about 285 Watts.
HWInfo64 results seem a little vague, de maximums for CPU temperature are hitting 99C, but the average is 88C, and looking at the current temperatures it jumps from 88C to 97C for 1 second and goes back down.
I this image you can also see how I had my probes for measuring temperatures arranged.
Next up I tested 2 games, Skyrim with +- 200 mods and Far Cry 3.
Ambient was 21C, with the radiator temperature being 47C so about 26C higher than ambient, fans where around 70%. Here can see that H2O-Micro can be small and quiet when playing games.
Power draw at the wall was about 233 Watts.
So with only 50 Watts less power consumed than the Prime95/Furmark run and the radiator being 5C hotter, temperatures are excellent on both the CPU(76C MAX) and GPU(73C MAX)
Ambient was 20C, with the radiator temperature being 46C so about 26C higher than ambient. Fans where at around 70% speed.
Power draw at the wall was about 207 Watts.
Again excellent temperatures and fan speeds while playing a game.
I've also received some samples this week for the kit to check out and test.
Among them a set of fans most of you will recognize instantly.
But first! I orderded some Anti-vandal switches, Both are the same model and have a white led but 1 is a Dot and the other a Ring, let me know which you prefer. I already have a preference, can you tell?
Switches in Off state
Switches in On state
I modeled the switch in CAD and pooped out a render.
And finally I was sent 2 Noctua NF-A9x14 PWM fans by Noctua. These are actually my first Noctua's and I'm looking forward to testing them. I will be comparing them to some other manufacturers but they haven't arrived yet.
Some of my models I download from a website called www.grabcad.com and someone on there already made some Noctua models, but not of the Noctua NF-A9x14 PWM.
So I went ahead and made a CAD model and gave it a lick of paint in 3dsmax. I have to say I'm pretty proud of this model, it's 99% accurate.
That was it for now.