• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

project: Category 5 Cyclone - C5C

M

masbuskado

Limp Gawd
Joined
Nov 30, 2008
Messages
144
c5c_header_mas.jpg


I start this project in 2008 a couple of months after I finish my AirSupreme I and this one was the sequel AirSupreme II but as you may know my "AirSupreme I" evolve so I let this project out of the picture, but know I rename the project and I'll take over once again... so the concept is the same as AirSupreme I or EvO but with 120mm fans... new light color scheme, some custom modification and more air flowing...

Also this will be my first Inter-Forum thread meaning that this thread will be post in any Forum am subscribe. So it will be update simultaneously in all of the forums.

As always there is no plan cuz whatever came to my mind I'll try to do it...
So feel free to give your opinion, comment or disagreement cuz we know can't like to everybody...

So let's the mod begin...

Sponsored by:
newmodcity.com (2x 140mm Fans, 2x 140mm Custom Fan Grills and 3x 120mm Custom Fan Grills)
OKGear.com (4x 120mm Hex Mesh)
 
Last edited:
You did a great work with your last case :D Good luck with this now! :)
 
The Storm Cage by masbuskado

The Main Idea is... to put a real storm inside the case... yes a real storm...
So I need the 3 basic components for that...

1. Wind: Strong winds... For this I'll need 2x powerful 140mm Case Fan. Don't worry about loudness... Looking something around 120 CFM (already see all newegg fans - budget $30)

2. Water: Heavy Rain... For this I'll need some kind of tiny sprinkler to create some shower effect (1/4" or 1/2" will be good).

3. Lightning: Massive Thunder... I was looking for some flashing blinking disco light tiny enough to fit into the build (already founded see pics).

All the components will be added into The Storm Cage I'll make out of acrylic...

So basically right now I'll need some help finding the fans and the sprinkler just point me out where I can found them and thank you!!!

I'll explain how this thing gonna work later...

nmc_stormcage1.jpg


NMC_stormcage2.jpg


NMC_stormcage3.jpg


S5009223.jpg


S5009224.jpg
 
Hmm , I don't know how to found the things you want even in Sweden, but what about the fans?
 
Pzych0 said:
Hmm , I don't know how to found the things you want even in Sweden, but what about the fans?
Click to expand...

thanks man!!!
somebody give me an idea I'll try it and I'll keep everybody update about that...

Pzych0 said:
Haha, how about that one ? http://zedomax.com/blog/wp-content/uploads/2007/10/diy-sprinkler_6816.jpg ;)

http://www.lakewoodconferences.com/direct/dbimage/50086564/Glass_Bulb_Sprinklers.jpg or mabay that one to the right?
Click to expand...

thanks for you help luv the idea with the plastic bottle but is too big to fit into the case...

here is a pic of the fan I'll be using
http://www.newegg.com/Product/ShowI...80-06.jpg,35-185-080-07.jpg,35-185-080-08.jpg
 
How it Work - The Storm Cage

HIW_stormcage_nmc.jpg


I think this should create the Storm Effect base on my previous test in my lab... :D
 
:( was kind of busy doing some cyber-setting but I have all the material sitting around so expect an update next weekend or maybe during the week!!!

Take care guys!!!
 
cool project

how big's the reservoir going to be?

with that much airflow for the "wind", i'd assume that there'd be a considerable amount of evaporation and refilling the reservoir would be needed...
 
C5C - Category 5 Cyclone

2x 140mm fans, 2x 140mm Custom Fan Grills and 3x 120mm Fan Grills thanks to newmodcity.com

4x 120mm Hex Mesh thanks to OKGear.com

nmc_c5c_fg.jpg


S5009669.jpg


S5009674.jpg


S5009675.jpg


S5009676.jpg


S5009677.jpg


S5009678.jpg


S5009961.jpg


S5009962.jpg


Next week I'll start building the Storm Cage so stay tune!!!
 
[Completed] Building the Storm Cage Part 4 - May 18, 2009

Finallly I accomplish the Storm Cage Idea!
Now I have to wait until it dry to do some test!!!

Things to do: Drill a hole in the bottom to connect the custom reservoir and another one at the top to connect the pump and build my unique loop :D and let the storm begin!!!

I'll try to upload the video tonight!!! so stay tune!

S5000134.jpg


S5000136.jpg


S5000137.jpg


S5000138.jpg


S5000140.jpg


S5000141.jpg


S5000146.jpg


S5000147.jpg


S5000148.jpg


S5000150.jpg


S5000151.jpg
 
Category 3 - C5C

Making the Case Feet! - May 19, 2009

S5000167.jpg


S5000168.jpg


S5000169.jpg


S5000170.jpg


S5000171.jpg


S5000172.jpg


S5000173.jpg


S5000174.jpg


S5000175.jpg


S5000177.jpg


S5000178.jpg


S5000179.jpg


S5000180.jpg


S5000181.jpg


S5000182.jpg


S5000183.jpg


S5000184.jpg


S5000185.jpg


S5000186.jpg


That's all for now!!! I'll continue this project next week!!!
Now I'll be back to my other Project: Orion Pax
 
Looks great, awesome work.

So, what if your video cards have side power connectors? did you leave room for that with the storm tank?
 
Category 4 - C5C

September 23, 2009

Finally I manage to make some time for my previous projects!!!

[PAINTING]
S5001496.jpg


S5001497.jpg


S5001499.jpg


S5001500.jpg


S5001502.jpg


S5001503.jpg


S5001504.jpg


S5001506.jpg


S5001508.jpg


S5001509.jpg


S5001511.jpg


S5001512.jpg


S5001514.jpg


S5001515.jpg


S5001516.jpg


S5001517.jpg


S5001521.jpg


S5001523.jpg


S5001524.jpg


S5001528.jpg
 
You must log in or register to reply here.
Back
Top