Vito Corleone
n00b
- Joined
- Nov 9, 2005
- Messages
- 17
Hi
Maybe you know my case from other forums
I use the lianli v1100b case which is very noble, so i decidet to make an very discreet mod.
A composition of black aluminium, carbon and uv-plexiglas inside of the case.
Except of the radiator and the pump all water blocks are custom made.
The name of the project is according to the pest plaque in the 14th century
(why? i dont know )
Sorry for my bad english but i am from Germany.
So lets start:
First of all the case:
At the beginning i removed all useless parts in the case
then i used a dremel to cut a 120mm hole in the bottom of the case
(quite ugly but later you cant see it)
this hole is for the fan of the aqua-computer airplex evo radiator
mounted here
now it was time for the internal space
here i use mirror plexiglas to get a bigger and cleaner look
i wanted to have an very special reservoir in front of the mainboard
so i cut some plexiglas
this is the first test
the next step are the waterblocks
first the cpu block
i took 5mm copper and drilled 16 holes in it
then i made the first plexiglas top
then the last top and all other parts
(first i made blue plexi parts, they´ll be orange later
the first test of all parts
at night
then the first test in my old case
Maybe you know my case from other forums
I use the lianli v1100b case which is very noble, so i decidet to make an very discreet mod.
A composition of black aluminium, carbon and uv-plexiglas inside of the case.
Except of the radiator and the pump all water blocks are custom made.
The name of the project is according to the pest plaque in the 14th century
(why? i dont know )
Sorry for my bad english but i am from Germany.
So lets start:
First of all the case:
At the beginning i removed all useless parts in the case
then i used a dremel to cut a 120mm hole in the bottom of the case
(quite ugly but later you cant see it)
this hole is for the fan of the aqua-computer airplex evo radiator
mounted here
now it was time for the internal space
here i use mirror plexiglas to get a bigger and cleaner look
i wanted to have an very special reservoir in front of the mainboard
so i cut some plexiglas
this is the first test
the next step are the waterblocks
first the cpu block
i took 5mm copper and drilled 16 holes in it
then i made the first plexiglas top
then the last top and all other parts
(first i made blue plexi parts, they´ll be orange later
the first test of all parts
at night
then the first test in my old case