Building A gets the internet, will house the pfsense box, and has about 8 clients using the network (very little outside connectivity, they have a nas with cad drawings and other important files
The hardware in building A goes Modem, pfsense, which then goes to WRT54g with a directional antenna on the roof
Building B, gets connection via an antenna on the roof, into a WAP54g. At that point about 4 people use the connection here. Pull files off nas, and internet for looking things up.
Id like to replace the WRT54G, and the WAP54g with 802.11ac if possible, if not possible yet than 802.11n would be fine.
Ideally it would be one of the simple network POE bridge deals where the network cable goes to the bridge antenna on both ends and they get plugged into a switch from there. I keep seeing all over the internet.
Any suggestions would be helpful, as our current setup is too slow.
I dont know much about it so really need some guidance. Looking to spend less than 600 if possible.
The hardware in building A goes Modem, pfsense, which then goes to WRT54g with a directional antenna on the roof
Building B, gets connection via an antenna on the roof, into a WAP54g. At that point about 4 people use the connection here. Pull files off nas, and internet for looking things up.
Id like to replace the WRT54G, and the WAP54g with 802.11ac if possible, if not possible yet than 802.11n would be fine.
Ideally it would be one of the simple network POE bridge deals where the network cable goes to the bridge antenna on both ends and they get plugged into a switch from there. I keep seeing all over the internet.
Any suggestions would be helpful, as our current setup is too slow.
I dont know much about it so really need some guidance. Looking to spend less than 600 if possible.