Problems with SATA

xXaNaXx

Gawd
2FA
Joined
May 15, 2003
Messages
955
i just bought an Abit NF7-s v2.0 to replace my old motherboard, and i'm having problems.

my setup:

Abit NF7-S v2.0
Athlon XP 2500+ Barton @ stock
GeForce FX 5900U @ stock
1GB Mushkin PC3200 in dual-channel @ 333Mhz (1:1 w/CPU)
30GB Maxtor IDE hard drive on SATA channel (using serillel adapter)
Tekram DC-200 ATA100 RAID controller card w/2x Western Digital 120GB HD's in RAID0
WinXP Pro SP1 (will install SP2 after i figure out these problems)


what happens:

i used a Win98 boot disk to format the drive on the SATA adapter, then booted again from the WinXP cd to install Windows, keeping the current file system intact. i hit F6 to load the latest version of the SATA drivers, as well as the latest drivers for the Tekram RAID card, and let it do its thing. after copying the files, it wants to reboot, so during the reboot, i change the BIOS back to boot from the SATA adapter, and the setup continues as it normally does.

after finishing the install, it reboots again of course, then comes up into Windows. here's where the problems start. on my RAID array, i have all my setup files stored, which includes all my drivers, Service Pack 2 setup file, etc. i open up that drive, try to run the SP2 setup, and BOOM......system locks up hard, mouse is frozen and keyboard is non-responsive, not even ctrl+alt+del works. during this time, the HD LED on the front of the computer is solid red (no flickering whatsoever), so i leave it for a few mins to see if it will recover....nope.

so i reboot, download the latest nForce drivers and install them, thinking the generic chipset drivers just can't handle it.....wrong.....start the SP2 setup again.....PC frozen.

reboot again, try just copying the SP2 setup file over to the desktop to run it from there......PC frozen.

i jump onto my second system, come here to do a search, and see that it's generally a bad idea to install the nForce IDE drivers, which i did while installing the nForce driver package.

ok, so since the freezing/rebooting has caused some files to become corrupt, i totally reformat again, reinstall windows, then install the nForce drivers minus the IDE package. try to copy the SP2 file back to the desktop...PC frozen. at this point, i'm totally pissed, so i leave it frozen for about an hour while i go eat & take a shower, come back, and it's still frozen. shut down the computer, unplug my CDRW drive from the normal IDE port and connect the HD to it instead of the SATA adapter, reboot, and everything copies over from the RAID array with no problem whatsoever.

so at this point, i update my BIOS to the newest version on the Abit website, and made sure the Tekram RAID card's BIOS is up to date as well. put the HD back on the SATA, try to copy any file larger than 20MB or so....PC frozen.

try the other SATA port....PC frozen.

so then i think that since the BIOS has been updated since the last install, maybe a final reformat/reinstall will do the trick. now the damn thing won't even boot from the SATA adapter at all. i can format the drive from the Win98 boot disk with no problem, i start up the WinXP installation, selecting F6 to load the SATA & RAID card drivers, it copies all the files onto the hard drive, then wants to reboot. set the boot order back to SATA, get "invalid boot disk, replace and press a key to continue" (or something like that, i'm not at home right now, or i'd copy it verbatim....and yes, i made sure there was no floppy in the drive). i can set it to boot from SCSI, and the setup continues, but now i find that my RAID array is the c:\ drive, and the OS drive is d:\ & e:\ (two partitions, obviously).

i'm basically at a loss here as to why this is not working....the only thing i can think is that the serillel adapter is FUBAR, unless someone else has any other suggestions? i've got a second serillel adapter on the way in the mail from my brother who has this same mobo, he has a native SATA drive so he doesn't need it....i will be trying that when it gets here.

and don't tell me to just go buy a native SATA drive, cause i don't have the $$$ for that right now.......
 
im sorry, but its late and i don't quite understand your method (using a win98 bootdisk) :D

try this. set your first boot device to cdrom. fire up your comp with the cd. choose to boot from cd and go through the first few steps. hit f6 as soon as your prompted. pop in your floppy (oddly enough i cannot get the sata drivers off abit's site to work, only the ones from the floppy that came with my mobo) and choose the correct driver. my floppy has like 10 different sata drivers.

(sorry if you're a pro at installing xp and im talking noob)

it should install just fine and won't reboot for a while. the on screen directions are easy to follow . delete whatever you see and create a new drive and format it using ntfs.
 
i already did all that....i was just using the Win98 boot disk to format the drive, not to start the installation process. i just prefer using the Win98/DOS format utility over using the WinXP format utility.

after formatting with the 98 disk, i booted from the CD and continued on with the install
 
no one has any clue as to what may be happening here? surely someone else has had this problem before.....i'm hardly ever the first at anything, LOL :D
 
I think i understand what you are saying, but I have never heard of anything like that. Ive done Ghost installs on ATA RAID arrays from an SATA drive, but ive never had it lock up that many times.

I have never used the particular Maxtor drive that you are using, so i dont know if its the fact that that drive doesnt have native support for SATA (I dont know if it does or not, just speculating).

Have you tried setting up windows on another spair hard drive? If you dont have one spair you might be able to steal the one out of your other computer and use partition magic just to see if you can install everything.

Im really stumped on this one, but the thing about not having native support for SATA is the only thing i can think of.
 
Back
Top