Problem with my build and I need some help

profound

n00b
Joined
May 6, 2005
Messages
5
I am trying to see if you all might be able to help me out. I really really need some help.

I normally build my own computer and I haven't build one for so long.

I recently started building one up but I ended up having a problem.

I have a q6600 chip
1 g ddr2 ram
abit IP35 PRO Socket 775 Pentium Motherboard
COOLER MASTER eXtreme Power RP600PCAR 600W Power Supply
antec Case
2 IDE HD


I hooked up everything together and at first when I power it up, nothing happen. Now when I hit the I think clear cmos botton I think on the mother board (next to the keyboard and mouse input), it will then power up and the fans will spin. The fans will all spin (case fans, graphic card fan and heatsink fan) for say 10 seconds and then everything will stop. The motherboard have a red light that stays on. The green light will sometime blink or dont show at all

Now, my monitor is not showing anything and the system wouldn't power up.


I dont know what I did wrong but can someone PLEASE help me because I need to do some of my school works and I haven't been able to power up my computer for a long time. I am over my girlfriend's job right now using her computer and I also normally use my PPC phone to get on here.

I will truly appreciate it if anyone can tell me what the problem is.

I am thinking I didn't connect something right or maybe a bad mobo or processor?

PLEAE HELP
 
Did you make sure that the 4 or 8Pin P4 connector is connected? It's at the very top of the motherboard.

What graphics cared are you using?

Have you tried another PSU to rule out a PSU problem?

Did you make sure that power connector is hooked up correctly?
 
Have you tried changing the cmos battery? My badaxe did this it would power up when I removed the battery and reinserted it. After I hit the power it would do nothing. 5 bucks and a new battery the board fires off everytime.
 
Can you take any pics of your setup? These kind of problems are hard to troubleshoot if we can't visualize the setup.


So you tried every single thing that wizzi01 and I recommended, correct?

And you still haven't told us what graphics card you're using.

Test the RAM, CPU, video card, hard drive, and PSU in another PC to see which one is the culprit.
 
Back
Top