Problem after BIOS flash.

Blown Cap

Limp Gawd
Joined
Dec 14, 2002
Messages
269
So I decided to flash the BIOS on my Asus M2N32-SLI Deluxe the other day. Using the Asus EZ Flash utility in the BIOS I went from the original BIOS (1400 something. At work atm can't remember the exact number) to 2205. All seemed to go well untill the restart.

After it came back up I was greeted with a black screen, no beeps from the mobo, no post screen. I shut down and reset the CMOS. Powered everything up, single beep from the mobo and the post screen comes up. I went into the BIOS and looked it over, changed a few settings, hit save and exit. Black screen after restart.

It's starting to look like a hardware problem. I reset the CMOS again (which involves removing the video card everytime :mad:) and pulled all but one stick of ram. It works! I ran Memtest on each individual stick of ram and they all passed with no errors.

So the system works with one or two sticks of ram (I didn't try three) but not four. I'm using two pairs of Corsair XMS2 Twin2X2048-6400C4. I tried bumping up the ram voltage and using four sticks again, but it just keeps resetting itself a few seconds after Memtest starts.

So the new BIOS doesn't like running with all the ram slots full? Nothing is over clocked, the system was running fine for almost two years with all the same hardware before the BIOS flash. I feel like an idiot for flashing it now.

Any suggestions for a fix? Maybe something in the BIOS I'm overlooking. Only things I can think of are trying one of the beta BIOS files from Asus, or maybe trying to get the old BIOS back on it. The EZ Flash didn't give me an option to save the old version though.

I could also just buy two 2GB sticks and run that way.

I want to get this working and running stable so I can finally install Windows 7!
 
I would advise for one updating to the latest bios build using one dimm ( please ensure bios defaults are loaded ). Additionally 2205 bios noted this
Enhance the system stability when using certian EPP memory.
and your memory is EPP based what i will say is you may want to check you bios for EPP profile option if present ( additionally AMD CPU memory controllers are more sensistive when 4 dimms are present. I would advise you check in the manual for details or on AMD sites. You may as a precaution also want to replace the CMOS batery.

Hope this helps. Please enjoy the rest of your day.
 
I would advise for one updating to the latest bios build using one dimm ( please ensure bios defaults are loaded ). Additionally 2205 bios noted this
Enhance the system stability when using certian EPP memory.

Could you clarify this for me?

Are you saying that to update the BIOS on that board it is suggested you do it with only one stick of RAM?

If this is the case are other Asus boards the same way?

I've never heard of this and that's why I'm asking.

Thanks!
 
Hello,

It is not a requirement that you use only 1 DIMM when updating the BIOS, as most of the time you won't have a problem updating the BIOS no matter how many DIMM slots you have populated. However, for this issue we want to narrow down the possible causes of the no POST issue, and as Juan Jose mentioned, the memory controller on AMD CPU's is more sensitive when using 4 DIMM. So to be on the safe side, update the BIOS using only 1 DIMM, and then you can populate the other slots to make sure the system will still POST with 4 DIMM installed.

To Blown Cap,

I've tested the Beta BIOS versions and haven't encountered any issues so you can try to flash to either 2207, 2208, or 2209 to see if that resolves the issue. Also, there is no 14xx BIOS revision so I'm not sure which BIOS you were using previously but all of our previous BIOS revisions all the way down to the initial 0504 revision are available on our support website; support.asus.com -> click Download -> input your MB model in the top left field -> then click the BIOS category. I hope this helps and I'll be looking forward to hearing your results.
 
Thanks for the response.

I've never actually thought about it before but it is an interesting thought if taken a little further.

I suppose they're could be an argument made that the minimum components for a MB to post would be the best environment for a BIOS flash.

AAR, I appreciate the heads-up. :)
 
The fewer the variables the lesser then chance one of them can go wrong, right? :cool: At least that's the philosophy I use when troubleshooting and testing here.
 
Thanks for all the replies.

I didn't get a chance to work on my computer last night, I'll give it a try tonight. I'll probably try one of the beta BIOS files first and see if that'll work.

The 14xx BIOS that I was referring to was the default one that my motherboard shipped with. It was listed on the post screen, that's where I wrote it down from. I'm at work again atm so I can't check the exact number for it. I'll check and post it here when I get home.

Edit: Original BIOS #1402.
 
Last edited:
Well, I just flashed the BIOS to 2209. I started up the computer and it seems to be working. I'm cautiously optimistic, I won't be completely satisfied untill I put some stress on the system.

It still caused MemTest to reset the system after a few seconds. That's a little odd, but I never did run MemTest with the original BIOS, so who knows if it would have even worked then.
 
Sorry about my poor english.... if you don´t understand it, ask.
When you get the update to your bios I think it should put the "default settings" there, so your memory should not get the right voltage now.

If you can take a look at the Ram Voltage, put the right default voltage to then... the "normal" ram voltage is 1.8V (DDR2) and if your memories use 2.1, 2.2 or something else, this could be the problem.

Take a look at this... sorry if it didn´t help.

André Luis.
 
Sorry about my poor english.... if you don´t understand it, ask.
When you get the update to your bios I think it should put the "default settings" there, so your memory should not get the right voltage now.

If you can take a look at the Ram Voltage, put the right default voltage to then... the "normal" ram voltage is 1.8V (DDR2) and if your memories use 2.1, 2.2 or something else, this could be the problem.

Take a look at this... sorry if it didn´t help.

André Luis.

Yeah, I tried a couple different ram timings and voltages. It didn't make any difference before I flashed to the 2209 BIOS.

It seems to be running ok now. I just hope it stays that way.
 
Back
Top