Hey guys, first post. I tried to search around for the info I wanted, but I couldn't find a couple things I was looking for.
Basically, I got a new Tower + PSU + Motherboard + CPU + RAM.
The tower and PSU are called .... I-Cute. 400w power supply. Keep in mind that I paid $55 CDN for the combined.
Review of 400w I-Cute PSU
Then I picked up this motherboard from a mom and pops part distrobution store.
"MSI K8TM-ILSR S754"
And of course, my CPU was AMD retail 3000+.
and, RAM is PC3200, 512MB.
All the rest is pulled from a semi-new source.
Oh, and I also picked up some Artic Silver, 5 I think.
So anyways, here's my story.
I got all the aforementioned parts at once, came out to be about 600 after tax (not a bad deal), so needless to say I was pretty excited to put everything together and watch it blow away anything I've owned before. Heh. So when installing I wiped off the retail-heatsink's thermal pad. I thought I wiped it off pretty good, but it was just a household cloth. Then I went about applying the Artic Silver. I messed that part up. I guess I didn't think to read the instructions for applying the thermal paste to CPU's with a large heat spreader. Why? Because I emptied the canister of Artic silver onto the heat spreader, it was like, layered on there. I thought this was a good idea, at the time. Oh oh... I know better now.
Needless to say, I had a problem with my computer overheating. I caught the problem rather quickly, and finally "corrected" the problem. Upon taking the CPU off, I noticed that there was alot of thermal paste. Like, alot. There was even a gob on the side of the heat spreader. Needless to say, I cleaned off the heatsink and heat spreader as best I could. I got little plastic picks to get the hard to reach areas and everything. I worked long and hard with isoprophyll to get both pieces shiny clean. They looked fairly clean.
So anyway, I hooked it all back up and away I went, I had a stable comp. For a while.
Untill I was playing Quake3 and listening to MP3s in the background for about an hour or so.
My computer just rebooted. So I went and turned off the reboot-on-error in XP.
MACHINE_CHECK_ERROR.
I searched around, and couldn't find anything specific about this error, and my problem. Seems to happen when the CPU expects one thing, and gets another. Could be caused by overheating, or motherboard failure to provide requested functions.
So, I considered the possibility that it might be my power supply. How? Well, when I looked at my mobo+cpu temp, they were around 35-40, constant. Never saw them go higher, and never heard my temp alarm go off. So off I went to get a new power supply, and video card (needed to get it anyway =p). Well I put in an Entec 420w PSU, and it's a good product. I did the research, read the reviews, decent PSU.
Well anyway, I put that sucker in, and I got the same Voltage readings as I got with the I-Cute PSU. How annoying, see picture.
So, lastly... I got the chance to try Call of Duty. I ran that sucker in high detail (vid card i got = radeon 9800pro), and after a good 10 or 15 minutes, my comp just blue screens. I don't even see the error, it's just simply a blue screen, no text. Went into BIOS afterwards, and my CPU temp was around 58 degrees celcius.
So now my plan is to grab some fine sandpaper and sand down the heat spreader a little, and the heatsink, so that it's a good copper connection to transfer the heat. It's the only idea I got, assuming of course I didn't damage anything the first time around with my artic silver accident.
Anyone else got input on this?
Basically, I got a new Tower + PSU + Motherboard + CPU + RAM.
The tower and PSU are called .... I-Cute. 400w power supply. Keep in mind that I paid $55 CDN for the combined.
Review of 400w I-Cute PSU
Then I picked up this motherboard from a mom and pops part distrobution store.
"MSI K8TM-ILSR S754"
And of course, my CPU was AMD retail 3000+.
and, RAM is PC3200, 512MB.
All the rest is pulled from a semi-new source.
Oh, and I also picked up some Artic Silver, 5 I think.
So anyways, here's my story.
I got all the aforementioned parts at once, came out to be about 600 after tax (not a bad deal), so needless to say I was pretty excited to put everything together and watch it blow away anything I've owned before. Heh. So when installing I wiped off the retail-heatsink's thermal pad. I thought I wiped it off pretty good, but it was just a household cloth. Then I went about applying the Artic Silver. I messed that part up. I guess I didn't think to read the instructions for applying the thermal paste to CPU's with a large heat spreader. Why? Because I emptied the canister of Artic silver onto the heat spreader, it was like, layered on there. I thought this was a good idea, at the time. Oh oh... I know better now.
Needless to say, I had a problem with my computer overheating. I caught the problem rather quickly, and finally "corrected" the problem. Upon taking the CPU off, I noticed that there was alot of thermal paste. Like, alot. There was even a gob on the side of the heat spreader. Needless to say, I cleaned off the heatsink and heat spreader as best I could. I got little plastic picks to get the hard to reach areas and everything. I worked long and hard with isoprophyll to get both pieces shiny clean. They looked fairly clean.
So anyway, I hooked it all back up and away I went, I had a stable comp. For a while.
Untill I was playing Quake3 and listening to MP3s in the background for about an hour or so.
My computer just rebooted. So I went and turned off the reboot-on-error in XP.
MACHINE_CHECK_ERROR.
I searched around, and couldn't find anything specific about this error, and my problem. Seems to happen when the CPU expects one thing, and gets another. Could be caused by overheating, or motherboard failure to provide requested functions.
So, I considered the possibility that it might be my power supply. How? Well, when I looked at my mobo+cpu temp, they were around 35-40, constant. Never saw them go higher, and never heard my temp alarm go off. So off I went to get a new power supply, and video card (needed to get it anyway =p). Well I put in an Entec 420w PSU, and it's a good product. I did the research, read the reviews, decent PSU.
Well anyway, I put that sucker in, and I got the same Voltage readings as I got with the I-Cute PSU. How annoying, see picture.
So, lastly... I got the chance to try Call of Duty. I ran that sucker in high detail (vid card i got = radeon 9800pro), and after a good 10 or 15 minutes, my comp just blue screens. I don't even see the error, it's just simply a blue screen, no text. Went into BIOS afterwards, and my CPU temp was around 58 degrees celcius.
So now my plan is to grab some fine sandpaper and sand down the heat spreader a little, and the heatsink, so that it's a good copper connection to transfer the heat. It's the only idea I got, assuming of course I didn't damage anything the first time around with my artic silver accident.
Anyone else got input on this?