Post your X800XL temps

Entropy said:
I'm getting 43 Idle, and 55 full load at 444Mhz/560Mhz coming out of games. This is with stock cooling.

that's a pretty sweet OC if that's a BBA card, Entropy. Mine will only do 425 on the core (not sure about my memory yet).
 
Sorry to drag up a few-week-old thread, but I was wondering how your coolers are working? I just got an ATI AIW X800XT AGP card, and I'm debating between an Arctic Cooling ATI Silencer 1, Revision 2, or the Zalman HSF mentioned in this thread (http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=373041). I have a couple of quick questions...

1) How is the Zalman's installation?
2) Does the Zalman come with adhesive thermal pads for the ramsinks? If so, are they worth using? If so, can they be removed easily without damage to the card?
3) Are there any installation instructions on the web for the Zalman?
4) I am having issues with all of the heat from my new card being dumped into my case. Will the Zalman perpetuate this issue? Would a slot exhaust cooler beneath it help get rid of the hot air from the video card?
5) Does the Zalman come with the neccessary adaptors to run the fan off of the PSU? Is it safe to run it from the videocard so I can maintain fan control?
6) For the ATI Silencers, is the one I am looking at for my card. I noticed that the heatsink in it is much smaller than the other models' ones. Would I be better off thermally with the Zalman?
7) Do the fans commonly damage the videocards? This thread is the first I have heard of these kinds of issues, and the concept of sparks does not sound like something I want inside of my computer.
8) What kind of thermal paste should I use with either of these heatsinks? Will Arctic Alumina perform nearly as well as Arctic Silver 5?
9) Am I better off with the Zalman in general?

Thanks guys!
 
Booby McNipples said:
that's a pretty sweet OC if that's a BBA card, Entropy. Mine will only do 425 on the core (not sure about my memory yet).

Thanks :D, and yes, its a BBA (bought from Futureshop for 399 CDN!) I'm gonna do some minor VMODs, (pencil stuff, I don't trust my self with resistors and such) after I get an ATI Silencer 5 Rev. 2 and I'm hoping to get to ~470. If the pencil mods don't cut it, I'll get my buddy who's all into electrical stuff to VMOD it for me. Wish me luck lol
 
Well, I just got my ATI5 and put her on last night. I'm down to 38C idle and 53C load.
My only problem is one of the fan shround screw bosses is touching the nb cooler. (on my Ultra D). I am going to remove the card and shave the thread boss for clearance. Less noise for sure. I'm happy. Now I can't wait for crossfire X800's to be in stock at my local stores!
Lastly, the stock BBA cooler fan spec is .35A. The card should have enough power for the ATI5 cooler to be plugged on board. So far, no problems.
 
Well, i just installed my Zalman VF700-CU yesterday & getting temps of 37c idle & 62c load, my x800xl is overclocked to 458 core 565 memory.
 
for u guys that have arctic cooling, beware it will blow ur card eventually...
that happened to mine within 1 month of use, low oc 418-518. usin a5
just got a zalman instead, but i might use the ac again cuz it was cooler with it, ill just connect it to the psu instead, i recomend u to do the same thing before somethin bad happens to ur card...
trust me u dont want to find urself one sunday morning after wakin up that ur vid card is fuked up, and u cant play anymore ! or do anythin ! arrrg !!!
had to get my replacement... ;)

later n good luck ! :D
 
I get about 44c idle and 70c load :( . I'm thinking about getting the AC5 Rev. 2 soon, since my case temps aren't that great- my front fan doesn't move too much air in the first place, and barely any cool air makes it past the HD cages.
 
Sapphire, stock cooling. 450/550 clocks. Currently running at around 45C idle and up to 60C max under load. No problems.
 
browndwarf79 said:
I'd still like to hear from people with ATI-5. I wanna buy it so the heat exits the box but if theres probs then Im not so sure.
The zalman looks cool but I have no fans in my box.

For op. Mine does about 39c idle and up to 65 that Ive seen in game.
Just started trying to oc so I dont know temps on that yet.

Im quoting myself :)
Never bought the coolers. Its now June and its hot as hell in my place since I have no ac :(
Temps went from above to 52c idle to about 75-80c in load.
I think its time I get teh cooler HUH? LOL IM dying here.
 
Powercolor stock cooler, running real-time HDR IBL and graphing with ATI tray tool..

GPU Min: 46.63 Max: 66.50

Room Temp: 25c
Ambient Temp: 44c (load)

In a CM Praetorian with stock cooling and fans controlled by Antec PSU.
 
browndwarf79 said:
Im quoting myself :)
Never bought the coolers. Its now June and its hot as hell in my place since I have no ac :(
Temps went from above to 52c idle to about 75-80c in load.
I think its time I get teh cooler HUH? LOL IM dying here.

haha..damn...sounds like time to get a new cooler AND an A/C system :p
 
Sapphire X800XL AGP

Stock cooling
34c idle, 51c load

410/520

Will buy Zalman VF700cu and possibly get 27c idle temps.
 
Well, I finally got around to installing an ATI Silencer 5 Rev. 2 and it worked beautifully for about 3 days and then the fan died. My temps went from 40c/70c to 38c/53c I was extremely happy with the results BUT there was a penalty: my chipset temps jumped up by 6-7 degrees because the Silencer was obstructing airflow. I'm getting ready to RMA it but I'm considering purchasing the Zalman this time around.
 
I just installed an Arctic Cooling ATI Silencer 5 (rev. 2) and my idle temps went from ~47c to ~38c as reported by ATI Tool.
My load temps went from ~78c stock to ~53c with the AS5 on it.

:cool:
 
GoldenTiger said:
Sorry to drag up a few-week-old thread, but I was wondering how your coolers are working? I just got an ATI AIW X800XT AGP card, and I'm debating between an Arctic Cooling ATI Silencer 1, Revision 2, or the Zalman HSF mentioned in this thread (http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=373041). I have a couple of quick questions...

1) How is the Zalman's installation?
2) Does the Zalman come with adhesive thermal pads for the ramsinks? If so, are they worth using? If so, can they be removed easily without damage to the card?
3) Are there any installation instructions on the web for the Zalman?
4) I am having issues with all of the heat from my new card being dumped into my case. Will the Zalman perpetuate this issue? Would a slot exhaust cooler beneath it help get rid of the hot air from the video card?
5) Does the Zalman come with the neccessary adaptors to run the fan off of the PSU? Is it safe to run it from the videocard so I can maintain fan control?
6) For the ATI Silencers, is the one I am looking at for my card. I noticed that the heatsink in it is much smaller than the other models' ones. Would I be better off thermally with the Zalman?
7) Do the fans commonly damage the videocards? This thread is the first I have heard of these kinds of issues, and the concept of sparks does not sound like something I want inside of my computer.
8) What kind of thermal paste should I use with either of these heatsinks? Will Arctic Alumina perform nearly as well as Arctic Silver 5?
9) Am I better off with the Zalman in general?

Thanks guys!


I have the zalman (posted earlier in this thread), can answer the following:

1. Found the installation easy - took about 20mins, very straighforward.
2. Ramsink have adhesive pads on them. Don't know how hard they are to take off as i haven't tried it yet!
3. http://www.zalman.co.kr/ goto coolers for graphics card, 700-alcu has flash installation movie
4. Had a single exhaust blower below the cooler, didn't seem to do much, then bought a vcool double slot cooler and dropped temps nicely:

http://www.hardforum.com/showthread.php?t=919893

But then i did have poor airflow going through my not so good case.

5. Comes with a Fan Multi-Connector Cable:

http://www.quietpc.com/uk/cables.php#zmmc1
 
I just got mine. I use the fan control option in Ati Tool to control my fan. I have it set for aggressive cooling, 40% fan at anything up to 47 C , and going to 100 % fan speed at 60 C. I'd rather the fan work more than my new vid card burn up. I also have a 80 MM side fan blowing in right on the card. 39 idle, around 48~52 loaded.
 
Where are you guys getting your ATI Silencer's Rev. 2. I am having a hard time finding those online. Also is anyone else having a problem with this cooler killing their card?



Neo
 
NeoTek said:
Where are you guys getting your ATI Silencer's Rev. 2. I am having a hard time finding those online. Also is anyone else having a problem with this cooler killing their card?


Neo

I purchased mine from jab-tech.com for $35 (including shipping). But the fan died on mine after 3 days and I sent an RMA request 2 days ago and have yet to hear from them. I'm gonna call them today and see if they received my request.
 
Booby McNipples said:
I purchased mine from jab-tech.com for $35 (including shipping). But the fan died on mine after 3 days and I sent an RMA request 2 days ago and have yet to hear from them. I'm gonna call them today and see if they received my request.

i have two dead ones. one from newegg and one from jab-tech. the guy at jab-tech told me to send my warranty request to Will @ scythe-usa.com. that was last monday and i haven't heard anything yet. have you been able to get warranty service?
 
Sapphire X800XL AGP stock cooling:

idle: 49'C
load(FarCry timedemo loop for 5 hours): 75'C

This in Shuttle SK83G lunchbox, I would expect about 10-15 degrees lower temps in normal ATX case.

Edit:

AtiTool set as follows:
below 70'C 40%
below 75'C 50%
below 80'C 60%
over 80'C 100%

Fairly quiet, but yet keeps the temps "low" enough to be stable at stock speeds.
 
mrzeld said:
i have two dead ones. one from newegg and one from jab-tech. the guy at jab-tech told me to send my warranty request to Will @ scythe-usa.com. that was last monday and i haven't heard anything yet. have you been able to get warranty service?

Dang that sucks! I actually took a refund and purchased the Zalman instead so I can't help ya with warranty info, sorry!

On another note, I just installed the Zalman but I've only had time for one pass of 3dmark '03 and the card went to 57c (idles at 37c). Not too bad.
 
I ran BF2 for quite a while and logged my temps. Idle was around 42c and load did not exceed 61c.

I am using ATI Tool and set the Fan to 64% @ 55c and 100% @ 60c.

Is 61c load a good temperature?

EDIT: It's an x850XT card by the way. And with stock fan speeds I get 70c at load. That's when I actually start seeing artifacts! :eek:
 
Woot 4 months later or something but I just ordered the silencer :O
Would ram coolers be needed too?
My temps seem to get hotter as the summer goes on
49c ambient and 55c gpu IDLE
Hopefully silencer will help...
 
Back
Top