Wasn't sure where to post this. If its in the wrong place mods please move it.
Okay so I tried Windows 10 again after trying the initial version. Installed fine, was relieved to find an actual start menu that I can use. And then just like Windows 8 it kicked me square in the nuts.
I have Windows 7 on a Samsung 128 GB SSD. I installed Windows 10 on a separate Samsung 64 GB SSD. In my system I have 2 -2 GB mechanical drives that were disconnected during Windows 10 install and configuration.
So 10 installs great everything working good. Shutdown and reconnected my 2 storage drives and restart. Everything smooth and working great. Had it running for a few hours and zero issues.
Shutdown and connect Windows 7 drive with 10 totally disconnected and it will not start. Went in the bios and verified that I was booting the correct drive and try again. Windows 7 repair utility pops up saying "something serious..yada" happened. I choose to start normally and both my storage drives need to have scan disk. I pressed space to escape this and now both disks are unreadable in Windows 7.
Same BS happened to me in Windows 8 so I gave up on it forever. Now the same crap is happening again with 10. If I boot Windows 7 neither storage drive is visible and on every boot I get asked to scan the disk. If I chose to scan the disk the pc restarts and its a never ending loop. In Windows 10 I see both storage disks but cannot access them as I get a "drive not available" error.
I have fast booting disabled in the bios and have tried all day searching for a solution. For the love of god can someone help me out. I'll be eternally grateful and will sacrifice my first born in your honor smile.gif
Okay so I tried Windows 10 again after trying the initial version. Installed fine, was relieved to find an actual start menu that I can use. And then just like Windows 8 it kicked me square in the nuts.
I have Windows 7 on a Samsung 128 GB SSD. I installed Windows 10 on a separate Samsung 64 GB SSD. In my system I have 2 -2 GB mechanical drives that were disconnected during Windows 10 install and configuration.
So 10 installs great everything working good. Shutdown and reconnected my 2 storage drives and restart. Everything smooth and working great. Had it running for a few hours and zero issues.
Shutdown and connect Windows 7 drive with 10 totally disconnected and it will not start. Went in the bios and verified that I was booting the correct drive and try again. Windows 7 repair utility pops up saying "something serious..yada" happened. I choose to start normally and both my storage drives need to have scan disk. I pressed space to escape this and now both disks are unreadable in Windows 7.
Same BS happened to me in Windows 8 so I gave up on it forever. Now the same crap is happening again with 10. If I boot Windows 7 neither storage drive is visible and on every boot I get asked to scan the disk. If I chose to scan the disk the pc restarts and its a never ending loop. In Windows 10 I see both storage disks but cannot access them as I get a "drive not available" error.
I have fast booting disabled in the bios and have tried all day searching for a solution. For the love of god can someone help me out. I'll be eternally grateful and will sacrifice my first born in your honor smile.gif