im having difficulty pushing my 720BE past 3.1ghz
ive added a new heatsink fan and prime95 stress tests at 3.1 dont push past 40c and idle is 29c
i had the same issues with the stock hsf --- with the new hsf temps are loads better, but still cant break past 3.2 stable.
now, i hope you can tell me im doing this backwards.
i've been increasing the 'CPU Voltage Control' in the first pic ... is that what I need to adjust to increase the voltage to the CPU? or should i be using 'CPU NB VID Control' ?
ive pushed the voltage as high as +0.075 and that still didnt help getting me past 3.2gh (would lockup loading windows or if i could boot into windows i wouldnt be able to do prime95 stable).
edit: ive even pushed my ddr3 back to stock settings and that still doesn't help / make any difference...
thank you,
ive added a new heatsink fan and prime95 stress tests at 3.1 dont push past 40c and idle is 29c
i had the same issues with the stock hsf --- with the new hsf temps are loads better, but still cant break past 3.2 stable.
now, i hope you can tell me im doing this backwards.
i've been increasing the 'CPU Voltage Control' in the first pic ... is that what I need to adjust to increase the voltage to the CPU? or should i be using 'CPU NB VID Control' ?
ive pushed the voltage as high as +0.075 and that still didnt help getting me past 3.2gh (would lockup loading windows or if i could boot into windows i wouldnt be able to do prime95 stable).
edit: ive even pushed my ddr3 back to stock settings and that still doesn't help / make any difference...
thank you,