i did all the sanding, primer then more sanding then paint sanding paint sanding balabablabal like 100 coats. finaly i got to the clear coat and i sprayed it on and in a few spots it got a wierd wrinkly surface. i was wondering what might be doing it. maybe moisture or too mutch clear coat?
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
painting problem
- Thread starter ][V][AGIC
- Start date
I've had similar problems before, but mine was with the primer/main paint; turns out that I was using two different types of paint (I think one was Enamel and the other was another type); So I would say try and find out what kind of paint they are before retrying the coat to make sure you don't have to sand it like 10 times (I literally did it THAT many times, thinking it was bad conditions, I sprayed too much, I did it wrong...) 