- Joined
- Jun 3, 2003
- Messages
- 6,677
In a short time I am going to be in posession of both an Asus P4P800 and an Abit IC7. The P4P800 was my first motherboard, but it fried (twice), so I gave up and bought an IC7. Then last week I decided to RMA the P4P800 (the CPU socket was in flames...I truly doubt that that was my fault).
One will be kept, the other paired up with a 2.4A and sold. So obviously if the P4P800 dies with a Prescott and the Abit doesn't care about the difference, then the Abit is the only choice. Or vice versa.
As I see it:
Pros of IC7:
875P chipset
Firewire
Cons of IC7:
No PAT w/ 4 DIMMs (my current situation)
No onboard LAN (currently using a card)
Pros of P4P800:
Onboard Gigabit Ethernet
Possibility of PAT w/4 DIMMs (haven't tried in a long time)
Cons of P4P800:
No firewire
PAT not a certainty
Possibility of it bursting into flames again
One more thing: the reason I was considering selling the P4P800 to this friend of mine is that it only fried when I was in the case doing something. (And yes, the power was off at the time.) It ran from June-August just fine until I was playing with my fans or something and then from August-March just dandy until I was cleaning up my wiring job. Therefore, logic dictates that if there is no fiddling, there will be a much lower chance of failure. Besides that, he'll be using a different processor, RAM, and case. I don't hear about any other users who have had P4P800s die on them quite so often so it's probably something in my setup that it doesn't like.
One will be kept, the other paired up with a 2.4A and sold. So obviously if the P4P800 dies with a Prescott and the Abit doesn't care about the difference, then the Abit is the only choice. Or vice versa.
As I see it:
Pros of IC7:
875P chipset
Firewire
Cons of IC7:
No PAT w/ 4 DIMMs (my current situation)
No onboard LAN (currently using a card)
Pros of P4P800:
Onboard Gigabit Ethernet
Possibility of PAT w/4 DIMMs (haven't tried in a long time)
Cons of P4P800:
No firewire
PAT not a certainty
Possibility of it bursting into flames again
One more thing: the reason I was considering selling the P4P800 to this friend of mine is that it only fried when I was in the case doing something. (And yes, the power was off at the time.) It ran from June-August just fine until I was playing with my fans or something and then from August-March just dandy until I was cleaning up my wiring job. Therefore, logic dictates that if there is no fiddling, there will be a much lower chance of failure. Besides that, he'll be using a different processor, RAM, and case. I don't hear about any other users who have had P4P800s die on them quite so often so it's probably something in my setup that it doesn't like.