• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

P4 Performance problems

J

jnex26

2[H]4U
Joined
Aug 7, 2001
Messages
3,353
Hi Guy's

i have just aquired a P4 system. (See below for specs) anyway this system is acting a little slower that i would have expected it to. Now I beleive the problem to be with the memory which although is fastish ram (333) it's the amount of ram avalible for it to use. Also The processor only get's upto 30 Degrees which i would have expected it to get hotter.

Specs

Jetway MiniQ Sff Barbones system. (Sis chipset)
P4 1.7 Ghz
256Meg 2700 Ram
 
If its a general use pc then the sis chipset might be causing your woes. The p4 is a bit of a slouch below 2ghz. So that might be a factor to, another 256 megs of ram would help also.

For windows/mpeg/etc it should be fairly peppy.
 
You can add another 256 meg ram stick to increase the memory. Also, check the video card. Getting a better one can also improve the performance of your system.
 
Plus its a 1.7
its probly a williamette :rolleyes:

But you cant comare it to a Northwood w/ HT (which is fast as hell)
 
I've fixed it.

The problem was down to the intergated graphics card. I put in my old GF2 and it was a instant improovement.

Cheers for all your help guys.
 
...XP will thank you for more RAM. You should notice a big difference if you went from 256 to 512.

Cheers - B.B.S.
 
You must log in or register to reply here.
Back
Top