• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

P180 Mini- Triple Rad + Full Coverage GPU Block...Pics

T

TheScavenger

Limp Gawd
Joined
Jun 25, 2008
Messages
359
Here it is at about 95% complete...

- The middle and right rad fans are 120mm x 20mm Yate Loons
- The top of the hard drive cage has been ventilated to allow proper airflow to the rad fan above it
- I plan on putting an exhaust fan on the rear of the case but I need a couple 45 degree fittings for the rad first

Good1-1.jpg


Good2-1.jpg


Good3.jpg


Good4.jpg


Good5.jpg


Good6.jpg


Good7.jpg


I'm in the process I devising another layout for my gpu-output to reservoir-input tubing. It's probably going to involve a couple weird adapters. Let me know if you have any questions or comments :D
 
Holy tube crimping! Otherwise nice use of space! ...And I thought I was clever in watercooling my entire board and CPU with two-320s and a 240 radiator in my Antec 1200.
 
Nice build. I am starting a build in the same case. If i go with water cooling, I am going to use the Koolance res/pump combo that slides in a 5 1/4 bay. It consolidates everything very nicely. I used them in the past and never had one issue with them. Temps were good too.

rp-1000bk_p0.jpg
 
You must log in or register to reply here.
Back
Top