• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Overclocking help needed

S

SocceRich20

2[H]4U
Joined
Aug 4, 2003
Messages
2,512
Hello,

I have the following
-2.8C
-IS7
-2x 512MB Kingston HyperX PC4000
-ATI Radeon 9800 Pro
-Zalman CNPS-7000Cu

Right now I have it running at the stock 200 fsb, at 1:1. All settings are are default now, voltages and such. What would be my best bet to try to reach 250fsb. About what voltages for the ram and cpu would be right? I heard that Abit boards undervolt the ram. Any help is appreciated. Thanks.
 
the ram is good for DDR500 which is a 250fsb, so whatever the default voltage is for memory, you shouldnt need to raise it. you might want to bring it up one notch just for the heck of it. im not to sure about CPU voltages on the 2.8c. i would start off at 1.65v, and work your way down on the voltage. people usually start the other way around, but i find it easier to troubleshoot when going from higher voltages down to lowest stable voltage.
 
You must log in or register to reply here.
Back
Top