Overclocking...blah...blah...blah

Status
Not open for further replies.

302efi

Gawd
Joined
Oct 25, 2004
Messages
943
Seriously....How much preformance gains is there to be had running a 2.4 ghz CPU at 2.7 ?

How about taking your vid card from 490 core to 520 ?...or the memory from 1.8 to 1.9 or 2000 ?

Running hardware on the brink of dying for a such small gains ?

Now don't forget about the $50 CPU heatsink and $40 for the vid card as well :rolleyes:

...or the $100 case that has "better" airflow...lol

...but you can't forget the $200 water cooling system and extra $50 CPU, chipset and GPU blocks.

Then spend all your time benching marking instead of actually playing games :confused:

...and in the end you got 10fps :p
 
well, if you have your system overclocked, then you can boast about it later, assuming whatever part is still working.
 
Overclocking is for enthusiasts who want to get more performance out of something. OC'ing done right will not lessen the life of your components. Whether the performance difference is 10% or 30%, its still fun to OC. If you don't think so, then don't OC.

As an enthusiast, I can tell you that most of my machines are NOT overclocked. They've all been OC'd at one point in time, but when they move along down the hand-me-down chain, they go back to stock settings. The only systems I keep OC'd are the ones I'm currently using.

2.4 to 2.7 is a very modest OC if you're talkin about a Core2 chip. Hell, even my 1.8Ghz Opteron can reach 2.8Ghz on stock cooling, lol. Granted, it took a while to get that Opty stable at that setting, but still, its a nice challenge.

OC'ing a Core2Duo is even easier. Intel engineers said the max voltage for a chip is 1.55v, yet they sell these chips to operate at 1.25v. Even on stock voltage, you can reach some nice OC's to yield some noticeable performance gains. Keeping the voltage as low as possible keeps the heat low, which preserves the life of the chip. A safe load temp for core2duos is 60°C.

A $50 CPU HSF is a small expense considering the overall cost of a $1000 system.

With vidcards, they're not always running at those OC'd speeds, so they're OK. Sometimes, the OC is the difference between 30fps and 20fps... and trust me, in a FPS game, 10fps is noticeable.

If you want some perspective, just look at how much performance you're actually adding. Even with your example, a 300Mhz difference is a lot for a Core2 chip. Whats the IPC for a Core2? 5? lets use 5 as an example. 300 megahertz = 300 000 000 cycle/second. Now, multiply that by 5 (=1 500 000 000), and thats how many instructions you're actually gaining per second.

If OC'ing does not compromise stability and reliability, then theres really no reason to not OC unless you're just lazy and/or don't want to. I've been running my Opty165 at 2.6Ghz for over 2 years now, and havent had a single problem with it.

Why OC? because you can. Will it shorten the life of your components? not if done correctly and within reason.

I can tell you from personal experience that my encode times are a lot shorter with my CPU OC'd. And since I enjoy tweaking my system and my OC doesnt compromise system stability/reliability, I find it well worth the original time it took to OC/stress test my systems.
 
Why OC? Just for the hell of it.

I think you've gotten a slightly misdirect notion of overclocking. You do not need to get a $50 HSF or $200 water cooling setup. A simple $20 to $20 HSF is all you need to overclock a C2D. I think you're putting all overclockers into one group when in fact that with PC enthusiasts or any kind of hobbyists/enthusiasts, there will be some extreme examples.

Hardware these days are more resilient than those in the past so a little OC or even a good size OC is possible without it harming anything. However over zealously or not correctly OCing can damage hardware. This is where the fun begins. It's up to the OCer now to find the right settings to get the most out of his system.

Who says that you need a $100 case for airflow quality? I've seen some $50 cases that have better airflow then some $100 cases. And do remember that people don't buy cases simply for simply the case's "performance" but due to personal preference. Some people like the look of a case so much, that they're willing to spend the $100 on a case.

As for benchmarking all the time, I haven't run a benchmark since I built my new system. Like enginurd, I only benchedmarked and stress tested the system for a few days to make sure that it was stable. And that time was well spent because now I know that I have a very stable system with all the performance I can get out of it without going overboard. I OC'd my 2.13Ghz E6400 to 3.2Ghz with a $20 Arctic Cooling 7 Pro HSF. For me, that extra $20 and stability testing was well worth it for the knowledge that my CPU ran faster or as fast as some $1000 CPU.

Like enginurd has said, 10FPS does make a difference in some games, like First person shooters for example. And most likely you won't have to go overkill on the OC just to gain that much FPS.
 
Question asked and answered perfectly......I think we'll let this flamefest die before it starts....:p
 
Status
Not open for further replies.
Back
Top