Only One IDE Channel On New Intel???

cisco guy

2[H]4U
Joined
Jul 23, 2002
Messages
2,277
bastids

http://anandtech.com/chipsets/showdoc.html?i=2088&p=2

"The new Intel chipsets only support one IDE controller, so two IDE devices on the same channel is the only option for IDE. With SATA optical drives only just starting to appear, that means your IDE hard drive and optical IDE device will have to share a single channel. Even if you have SATA drives, your two IDE optical devices will have to share a single IDE channel. It is abundantly clear that Intel is trying to accelerate the move to SATA by limiting IDE options on the new chipsets."
 
I am afraid so. Not that I will really care because even now I only use one IDE channel with two optical drives and 2 serial hard drives. Seems Intel is really trying to push the market (and its isn't with performance).
 
Just remember that things will be different with different manufacturers. Just cause Intel decided to only put one IDE channel on their board doesn't mean that every manufacturer will do the same..... I hope not anyway. Yet another reason I'm waiting til the release of the 925XE and it's 1066MHz FSB toward the end of the year (Hopefully).
 
as it turns out, i have been corrected
the Intel CHIPSET only supports one IDE, but as you say, the mobo manuf can put any ADDITIONAL it wants. And the Gigabyte mobo in the review has 2 additional IDE/RAID channels (ea prim/sec) from another chip on the mobo.

so, i'm good to go :p
 
cisco guy said:
as it turns out, i have been corrected
the Intel CHIPSET only supports one IDE, but as you say, the mobo manuf can put any ADDITIONAL it wants. And the Gigabyte mobo in the review has 2 additional IDE/RAID channels (ea prim/sec) from another chip on the mobo.

so, i'm good to go :p

Unless you're migrating both optical and megnetic drives from an old system, the single IDE channel makes sense.

Hang your *optical* drives on it, and buy new SATA hard drives.

SATA suffers from the classic *chicken and egg* problem: most hard drives in stores like Best Buy are for the replacement (not necessarily upgrade) market, and the drives being replaced are PATA (SATA is more common than SCSI, but still dwarfed by PATA on the desktop).

That pretty much *forces* Intel to seed the market.

Intel is taking a two-pronged approach to this. First off, it is EOLing the 84x chipset (and all its own desktop boards based on it) as this is the last chipset without a native SATA option.

Second, in addition to introducing the new 9xx series (Gransdale and Alderwood) it is ramping up production of the ICH5R/ER southbridge (and killing off the original ICH5 southbridge) for remaining 865x/875P chipset shipments to board makers.
 
and if you have scsi everything, its all good :)

anyway if you really need PATA then just get a PCI card for like what $20?
 
Well you can get PATA cards for next to nothing. Some retail drives even come with them.

But SATA is the way to go. I'd switch if I had the money.
 
Two PATAs is fine with me, that's all I'm using now. The CD-RW/DVD-ROM combo drive, and the DVD burner. Yes, both on the same channel, as I don't forsee ever having to use them at the same time. If need be, I could drop the combo drive.

Both of my hard drives are PATA, but I'm using Abit's serillel adapters just for a bit less cable clutter, and it seems to be working okay.

I don't think PATA/SATA adapters will work for optical drives, though.
 
Back
Top