Oldgrading my Dual System Setup Saga. Recommendations/Input wanted.

RobMuadib

n00b
Joined
Aug 25, 2005
Messages
17
Hey all (Sorry this is kind of long, been a twisting path of an upgrade saga so far)

So, I've been running a dual system setup using the Synergy software for a couple of years now. (I bought a new case and ended up building two whole systems, one frankensteined from the old parts, and one new stuff. One attached to 19" LCD, another to old 17" CRT. (Need to upgrade to like a 20"+ SIPS panel and want a Trinitron 21").​

These are old Specs:

Primary:
Epox 9RDA+ NF4
Athlon 64 3000+ 1.8Ghz (Venice)
4x512MB of corsair value select cas 3 DDR400/PC3200
Nvidia 6600GT 256MB
73GB 10K Seagate SCSI
146GB 7200 Seagate SCIS
29160N (Yes, I refuse to give up this damn card, I spent $200! on it, and that was in like 1998 dollars or something, besides I was finally able to afford a 10K drive for it!)
plus an IDE DVD burner/DVDROM/CDRW & floppy.
attached to 19" Hyundai L90D (I need a 20" SIPS panel so bad)
Apevia X-Super Alien Full Tower
OCZ 600W somethingxstream (Have to look, could use an upgrade)

Secondary:
Epox 8RDA+ NF2
Athlon XP-M 2400+ (Barton) running 2500Mhz (200*12.5)
3x512MB CAS3 Micron DDR400
AGP Nvidia 6200GT 128MB
Maxtor 80GB IDE primary drive
Seagate 750GB SATA
IDE DVD-Burner/DVDRom & Floppy
attached to ancient 17" CTX CRT (I think it came from my P133 system back in the day)
original In-Win Q500 FT Case
Rosewill 500W? (need to look, & upgrade))

So, this is old shiat, The primary use for these computers is to webdesign/photoshopping on, plus office, quickbooks, etc, with a bit of gaming (FPS/RPGs like FO3), lots of web browsing, downloading, mp3s etc.

Which brings us to my Oldgrading Saga. OK, so I've been checking out Adobe CS4, and decided I needed to upgrade to 4Gigs of RAM, so I dropped like $110 on 4 Gigs of Cas 2.5 DDR400 (which has pretty much wedded me to NF4 era stuff at the moment, don't want to invest in more memory at this point.) Also upgraded to a Galaxy Geforce 9500GT with 1GB of GDDR3 ($96 new from the egg). Then decided to grab a faster proc (that is like the slowest Athlon 64 pretty much.) So snagged a Athlon 64 4000+ (San Diego) for like $35 off of the forums and popped it in my primary machine. It's current config is..​

Epox 9RDA+ NF4
Athlon 64 4000+ 1 (San Diego) 2805Mhz (11x255)
4x1GBMB of Gskill cas 2.5 DDR400/PC3200
Nvidia 9500GT 1024MB
73GB 10K Seagate SCSI
146GB 7200 Seagate SCIS
29160N (Yes, I refuse to give up this damn card, I spent $200! on it, and that was in like 1998 dollars or something, besides I was finally able to afford a 10K drive for it!)
plus an IDE DVD burner/DVDROM/CDRW & floppy.
attached to 19" Hyundai L90D (I need a 20" SIPS panel so bad)
Apevia X-Super Alien Full Tower
OCZ 600W somethingxstream (Have to look, could use an upgrade)

alright, so I already have dropped $235+ into oldgrading my primary. Also, I'm running XPx32, where I rant into the 3 gig limit. Need all that ram for Photoshop. So am going to have to migrate to Vista x64.

Realizing this, decided that everything needs to be faster, and I want a 64 bit capable pro on both of my systems. So I have grabbed more hardware to that end. For price reasons, and because of my abundance of DDR (I have 4x1GB set, 4x512MB set, and 3x512MB set), decided to stick with NF4/Socket 939 stuff. So doing a little research I got the following stuff​

2 Opteron 165 dual cores, 1 in hand, one in the mail. (Spent like $125 for both of them)
Gigabyte

Gigabyte GA-K8N Pro-SLI (NF4 SLI board) ($53.75)​

So I've already spent $400 upgrading/buying parts. I was wanting to grab another NF4 SLI board, preferably a DFI lan-party or ASUS A8N SLI, but any NF4 SLI board that is $50-$60 if I can get it. Main reason is that the Epox 9RDA+ Ultra I has is old enough that the PCI.e slot on it is 1.0a, and the new PCI-e 2.0 card are only backwards compatible with PCI-e 1.1 slots, or so I read. Thats why I got the GF 9500GT instead of a radeon HD 3870. Also, the SLI boards will give me more upgrade options and support more SATA storage. (Will be needing more storage over long run)​


So, not wanting to spend more than another $100 or so, what you would buy to finish up this Upgrade.​

Currently on my shopping list is a NF4 SLI board to swap out for the Epox 9RDA+ on my primary, and a set of 2x1GB DDR400 to upgrade my secondary to 3Gigs of Ram. So Vista x64 will run well on it too. (I also want a 3rd NF4 board, so I can build a mom box that can run Vista as well, so I only have to support one OS on my systems).

So any recommendations/advice. Any of you been reduced to oldgrading? First Time I haven't had cash to upgrade to newish/new hardware.​
 
So any recommendations/advice. Any of you been reduced to oldgrading? First Time I haven't had cash to upgrade to newish/new hardware.

Just stop spending money on this "oldgrading". That's my advice. It just seems so wasteful at $400 for outdated and outperformed parts. For $400 to $500 with reusing your case, PSU and hard drives, you could've built a vastly superior system. Was this "oldgrade" over a period of several months or something?
 
Just stop spending money on this "oldgrading". That's my advice. It just seems so wasteful at $400 for outdated and outperformed parts. For $400 to $500 with reusing your case, PSU and hard drives, you could've built a vastly superior system. Was this "oldgrade" over a period of several months or something?

Well, I bought the extra memory first, which I dumped $110 into. I didn't expect to have the extra 300 or so. The 9500GT isn't exactly an old grade. So what I was trying to do was to upgrade both systems for under $500. I kind of jumped without looking on the DDR. Though I suppose I could try to resell some of this stuff. But the big thing was I am trying to upgrade 2 Systems, since I like the workflow with dual system workstation using Synergy.

So let's say I can come up with another $150 what would you get for an upgrade for my main system, MB/CPU/RAM. With a couple of caveats on the board, Want Atx, not mATX, need at least 2 PCI slots, preferably 3, SLI would obviously be nice. And a fast multi-core proc? Something well suiteed to Adobe CS4 (Photoshop, Illustrator, Dreamweaver, Flash, etc).
 
So let's say I can come up with another $150 what would you get for an upgrade for my main system, MB/CPU/RAM. With a couple of caveats on the board, Want Atx, not mATX, need at least 2 PCI slots, preferably 3, SLI would obviously be nice. And a fast multi-core proc? Something well suiteed to Adobe CS4 (Photoshop, Illustrator, Dreamweaver, Flash, etc).

- Do you have a Fry's nearby?
- Why ATX if many mATX mobos can provide two PCI slots?
- Why do you need SLI? And this is why I'm asking if you need SLI:
Markyip1 said:
Just some info on SLI / Crossfire: It's absolutely not worth considering if a) you're gaming at a resolution under 1920x1200 (as you'll see no performance benefit over a single card,) and b) if you plan to buy one card now and another later. SLI / Crossfire as an upgrade path is usually a very poor idea, as by the time you're ready to get that second card, a new single card solution will likely be available that will outperform two of your older cards in tandem. Furthermore, there really is no cost benefit to the SLI Upgrade Route, as any additional cost in getting the new card can be easily mitigated in most situations by selling the original. By avoiding an SLI / Crossfire solution when it will not be of benefit, you gain a cooler running, simpler to maintain system and more importantly, access to a much better (and broader) selection of motherboards.
 
- Do you have a Fry's nearby?
- Why do you need SLI? And this is why I'm asking if you need SLI:


Hmm, I don't absolutely need SLI, but I like the idea of flexibility it offers. I tend to buy older hardware, especially since I am running 2 systems. Never examined SLI value too much. Obviously, the PSU requirements are ridiculous these days. But truthfully, I am more worried about expanded storage options, raid features, extra onboard lan. So ok, can skip SLI/Crossfire, but do want a full-featured ATX board. preferably that can accomdate a lot of memory, would like to run at least 6GB, 8GB idealy with CS4 and such on Vistax64. More worried about having more ram, than faster ram.

Also, supposing I can resell some of this stuff, I could probably come up with $200-$250. And no on the Frys. I usually shop online, newegg/Mwave/buy.com, etc.

thanks
 
I agree with Danny Bui that you should stop "oldgrading." For under $250, for example, you could have gone with:

$140 - AMD Phenom X4 9600 & G.Skill 2x2GB DDR2 800 combo (free shipping on both)
$75 - Gigabyte GA-MA770-DS3P AMD 770 ATX motherboard (~$9 S/H)

That system, with 4GB of DDR2 memory and a quad core processor, could easily outperform either of your two systems... and, in some cases, both.

And you don't need to spend a lot of money on a new power supply. The Antec Earthwatts EA430, which is more than enough for either (of your old) system(s), is on sale right now for $40.

I suggest that you sell your excess parts and get the money necessary for the new system. It may suit your needs so well that you end up relying solely on it.
 
Thanks Danny/Tiraides, you've given me some food for thought.

After some research I have decided on an economical upgrade that I can swing by selling off my extra hardware and throwing in a little cash. This is what I am looking it.

$120 - GIGABYTE GA-EP45-UD3R LGA 775 Intel P45 ATX Intel Motherboard
$120 - Intel Core 2 Duo E7300 Wolfdale 2.66GHz 3MB L2 Cache LGA 775 Dual-Core Processor - Retail
$42 - Crucial Ballistix 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory (Want to get 2 of these kits, but one will start me off fine.

That'd be right around $282, $323 with the 4x2GB setup. A hefty amount to spend, but would give me a VERY nice setup.

The gigabyte board packs a lot of expandiblity. Three PCI slots, for my SCSI needs, 8 Sata ports with Raid support, and supports up to 16GB. The Wolfdale slays in CS3 and other tasks it seems. The Geforce 9500GT is a solid card for my gaming habits. Can recycle the rest of my hardware. And I can upgrade the proce to an Intel Q6600 Quadcore later when the prices come down if I feel the need.

So what do you think, sound like a good plan? (I am still going to use the NF4 SLI and Opteron 165 (spent $120 for that, will reuse DDR I have to upgrade my secondary system, (Which is NF2 currently.) , and throw my old Geforce 6600GT into it along with existing HDD/DVDs/case etc.

That should make me a very nice dual workstation for photoshopping/Office tasks, and some gaming and Multimedia action. (I work at home on my PC(s), so having 2 computers with synced data makes it much less likely I will be unable to work, another benefit of my dual setup.)

thanks for your input.
 
The Q6600 has already come WAY down in price. I remember when it was $100 more expensive about a year ago. To be honest I'm surprised it lasted this long. I was thinkin for sure it'd get nixed. I guess I was wrong.
 
Intel plans to stop production of the Q6600 some time with the first quarter of this year. I doubt it's going to get much lower in price. However, I suggest trying to find one used; you may be able to find a used Q6600 for around $140-$150.

And it's a good plan to use the NF4 SLI and Opteron 165 -- since you already have them -- for the second system.
 
Ahh yeah, that would explain why I didn't see the Q6600 for sale at Newegg, will try to come up with extra cash to snag a Q6600, guess I could wait on extra memory longer. Now to sell some old stuff.

Thanks for your input everyone.
 
The Opteron system should still perform nicely, even for development purposes. Though it will show its age with CS4, it still runs CS2 nicely, lol.

Q6600 has actually gone up in price, and is now $190 at newegg... they must have low stock for such a high price. I remember when they were $316. Time flies.
 
Back
Top