NVIDIA Registers Hopper GPU Trademark – A Next Generation MCM GPU

Beaver LongTail

8-D
2FA
Joined
Dec 19, 2005
Messages
19,458
No opinion, but unreliable source?

"Long story short, NVIDIA is perfectly capable of creating an MCM based GPU and would even get some serious yield benefits out of this if it chooses to run with this for Hopper GPUs. Considering the 7nm node is now entering a mature stage with EUV, etches are going to be very clear and should be able to support a concept like this with ease but are still limited by the reticle size. Switching to an MCM based design would allow NVIDIA to build monstrous GPUs with a net die size of more than 815mm² (the sky is the limit with MCM - as AMD has proven)! So if it wants to continue on its non-linear performance increase trend that has made it so successful, it might not have any other option but to adopt this."

https://wccftech.com/nvidia-registers-hopper-gpu/
 
MCM Nvidia GPUs... I would have put the possibility of them doing that anytime soon as 80/20 before.

However if they really have chosen to call it Hopper, the mother of the Linker. I would say its at least 50/50 now.
 
Inevitable for gpus to go this way. The only question is when and no one but Intel has made much noise about it for a reason.

I'd bet on AMD if they have the budget as they have most experience but so far that mostly seems to go to CPUs..
 
The thing with EUV is that the maximum die size has decreased vs. current methods. MCM is necessary because they simply can't make a ~800 mm^2 using EUV due to the optics involved.
 
The thing with EUV is that the maximum die size has decreased vs. current methods. MCM is necessary because they simply can't make a ~800 mm^2 using EUV due to the optics involved.

So what is the new max size?
 
Back
Top