• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Normal Temps or What

J

JKownz

[H]ard|Gawd
Joined
Nov 2, 2004
Messages
1,257
I have a swiftech water cooling kit. I have 2x2500Rpm fans on the 80mm rad and its connecting to a a64 3400 Northwood and a 6800 gt I am ocing my gt now to ultra speeds and i oced my cpu to 10.5x240= 2,520. i am getting 39-43C Idle and around 45-55C Load is this ok or is this not normal? Or should i get a second rad? Mobo is a dfi nforce 3 so you know and cpu voltage is 1.61 idle and goes up to 1.69 on load.
 
Those temps are ridiculously low for a single 80mm rad cooling those components.
 
JKownz said:
Ok thanks, just wanted to know :p
Click to expand...

why he says ridiculously low...i am assuming he is suggesting that ur temp sensor might be screwed up? as temp should be much higher with 1 80mm rad
 
could be, but as long as your machine isn't getting unexplained lockups or blue screening during heavy load then the temps can't be too bad. I say well done the 80mm rad
 
You must log in or register to reply here.
Back
Top