It might be caused by hardware failures. Try:
Any error messages?
Code:
dmesg | tail -n 20
Last edited:
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Newbie needs help with it 6274
- Thread starter Thomas R
- Start date
Did you configure your client to receive BA?
Is max-packet-size (or whatever its name is -- don't remember off the top of my head) set to "big" ?
Is client-type set to bigadv ?
Are you running off an SMP slot?
Something weird is going there. These 'Z' (Zombie) processes, while harmless, shouldn't be there,
please make sure your client is properly configured; then reboot your system and restart from
scratch please. Start the client and let it fold for 15 minutes. Then check if performance is any
different. Also (after said 15 minutes) capture complete output of:
and paste it here or to pastebin.com.
Is max-packet-size (or whatever its name is -- don't remember off the top of my head) set to "big" ?
Is client-type set to bigadv ?
Are you running off an SMP slot?
Something weird is going there. These 'Z' (Zombie) processes, while harmless, shouldn't be there,
please make sure your client is properly configured; then reboot your system and restart from
scratch please. Start the client and let it fold for 15 minutes. Then check if performance is any
different. Also (after said 15 minutes) capture complete output of:
Code:
ps -L auxw
top -b -n 1But next problem.
I´ve installes TPC.
When I give in "sudo tpc -psmax 1" there is no error.
But hardinfo shows for the most cores only a frequency from 1400MHz. Some are at 2200MHz.
What´s now wrong again????????????????
Is there a command for tpc where I can see the real frequency?
I´ve installes TPC.
When I give in "sudo tpc -psmax 1" there is no error.
But hardinfo shows for the most cores only a frequency from 1400MHz. Some are at 2200MHz.
What´s now wrong again????????????????
Is there a command for tpc where I can see the real frequency?
402blownstroker
[H]ard|DCer of the Month - Nov. 2012
- Joined
- Jan 5, 2006
- Messages
- 3,257
Include the flag '-bigadv' and 8101 goodness will be on the way.
Last edited:
Dead Things
Limp Gawd
- Joined
- Jul 8, 2011
- Messages
- 152
No, CPB/Turbo and PowerNow should be enablet for retail chips, as tear said before at #19
sudo TurionPowerControl -l | grep "pstate 1" should show you the real speed.
I have a Tyan S8812 mobo with 4 x 6272 retail and this command is working on my board after I use the command:
sudo TurionPowerControl -psmax 1
If it do not work, maybe you have to reset the board. I gave some wrong commands, but after I reset the board everything was back to normal again.
sudo TurionPowerControl -l | grep "pstate 1" should show you the real speed.
I have a Tyan S8812 mobo with 4 x 6272 retail and this command is working on my board after I use the command:
sudo TurionPowerControl -psmax 1
If it do not work, maybe you have to reset the board. I gave some wrong commands, but after I reset the board everything was back to normal again.
Last edited:
The pleasure is entirely mine alone!
Thank you tear I will say, it is him that know all this wonderful secrets.
But I also have a problem, DLB is some times missing on my 6272 rig. Is there anyway to force it to stay on all the time? The different in TPF is about 20 - 25 sec On or Off.
Thank you tear I will say, it is him that know all this wonderful secrets.
But I also have a problem, DLB is some times missing on my 6272 rig. Is there anyway to force it to stay on all the time? The different in TPF is about 20 - 25 sec On or Off.
Last edited:
I know that "./fah6" is the command to start F@H.
What do you think how I could else start it ever???
But I had shut down the terminal where this command was working. Because it was over 2 hours no more reaction.
Than I come here and made my posting.
Started a new terminal with htop and saw, that there is one command with "./fah6".
Killed this and started it in a new terminal again.
Now it is running.
Now I hope I have explained it better.
I know that my english is not the best.
What do you think how I could else start it ever???
But I had shut down the terminal where this command was working. Because it was over 2 hours no more reaction.
Than I come here and made my posting.
Started a new terminal with htop and saw, that there is one command with "./fah6".
Killed this and started it in a new terminal again.
Now it is running.
Now I hope I have explained it better.
I know that my english is not the best.
402blownstroker
[H]ard|DCer of the Month - Nov. 2012
- Joined
- Jan 5, 2006
- Messages
- 3,257
Thanks!
Langouste is a very smart tool that allow uploading & downloading at the same time. You will not be able see upload of the WU result in the fahlog.txt, because this is taken place in the background, in terminal 2. If you have to reboot the machine for some reason, you must take a backup of the f@h files first. The best way to do this is to copy the entire fah folder to the desktop. If thing goes wrong at booting & starting f@h you simple copy the fah folder back from the desktop and reboot again. This way you never loose a WU in folding again.
Langouste is a very smart tool that allow uploading & downloading at the same time. You will not be able see upload of the WU result in the fahlog.txt, because this is taken place in the background, in terminal 2. If you have to reboot the machine for some reason, you must take a backup of the f@h files first. The best way to do this is to copy the entire fah folder to the desktop. If thing goes wrong at booting & starting f@h you simple copy the fah folder back from the desktop and reboot again. This way you never loose a WU in folding again.
@402blownstroker
Here in Bavaria we say "I am a land-egg"!
That means, that I´m living offside any bigger town.
My Inet-Connection has 2Mbit here.
Thats really frustrating.
But this is not the problem on my problem ( )
@alias
You don´t understand what I want to say!
I give up - my english is really to bad.
But your tip regarding the previous storage of the FAH-Folder is really meaningful!
Here in Bavaria we say "I am a land-egg"!
That means, that I´m living offside any bigger town.
My Inet-Connection has 2Mbit here.
Thats really frustrating.
But this is not the problem on my problem (
)@alias
You don´t understand what I want to say!
I give up - my english is really to bad.
But your tip regarding the previous storage of the FAH-Folder is really meaningful!
402blownstroker
[H]ard|DCer of the Month - Nov. 2012
- Joined
- Jan 5, 2006
- Messages
- 3,257
No, do not run 2 instances with 32 cores each: 1 with 64. The IL cores just aren't as good as the MC for folding. Right now I have 48 IL cores @ 3.0GHz and they fold about the same as 48 MC cores at 2.4GHz. There are many factors that come into play and it is not just raw Gigahertz.
Since one week I have this problem
The machine was running normal with a 8101. After this there was a problem with the connection over hours and a normal smp-wu was comming in.
I killed ./fah6, making a restart and started ./fah6 again. A 8101 was comming.
But after this again a normal smp-wu.
Same procedure as before.
And now this is going so since a week.
What should I do?
The machine was running normal with a 8101. After this there was a problem with the connection over hours and a normal smp-wu was comming in.
I killed ./fah6, making a restart and started ./fah6 again. A 8101 was comming.
But after this again a normal smp-wu.
Same procedure as before.
And now this is going so since a week.
What should I do?
This problem isn't related specifically to your hardware.
More information -- http://foldingforum.org/viewtopic.php?f=18&t=23985
You may wish to express your concerns there
More information -- http://foldingforum.org/viewtopic.php?f=18&t=23985
You may wish to express your concerns there
This have been a normal situation on my rigs for about 2 weeks now. Randomly it comes down projetcs from P85xx & P69xx as those logs shows:
This one shows P8553
And this one shows P6946
This happens 2 or tree times a day or more!
Looks like this is going to be one of those days, number 3 is Project 6099:
This one shows P8553
Code:
[QUOTE][08:19:16] Completed 250000 out of 250000 steps (100%)
[08:19:32] DynamicWrapper: Finished Work Unit: sleep=10000
[08:19:42]
[08:19:42] Finished Work Unit:
[08:19:42] - Reading up to 64340496 from "work/wudata_00.trr": Read 64340496
[08:19:42] trr file hash check passed.
[08:19:42] - Reading up to 31555316 from "work/wudata_00.xtc": Read 31555316
[08:19:43] xtc file hash check passed.
[08:19:43] edr file hash check passed.
[08:19:43] logfile size: 215133
[08:19:43] Leaving Run
[08:19:44] - Writing 96271821 bytes of core data to disk...
[08:20:13] Done: 96271309 -> 91495772 (compressed to 5.8 percent)
[08:20:13] ... Done.
[08:20:18] - Shutting down core
[08:20:18]
[08:20:18] Folding@home Core Shutdown: FINISHED_UNIT
[08:20:20] CoreStatus = 64 (100)
[08:20:20] Unit 0 finished with 77 percent of time to deadline remaining.
[08:20:20] Updated performance fraction: 0.890375
[08:20:20] Sending work to server
[08:20:20] Project: 8101 (Run 2, Clone 3, Gen 218)
[08:20:20] + Attempting to send results [April 2 08:20:20 UTC]
[08:20:20] - Reading file work/wuresults_00.dat from core
[08:20:20] (Read 91496284 bytes from disk)
[08:20:20] Connecting to [URL]http://128.143.231.201:8080/[/URL]
[08:22:57] Posted data.
[08:22:57] Initial: 0000; - Uploaded at ~569 kB/s
[08:22:57] - Averaged speed for that direction ~532 kB/s
[08:22:57] + Results successfully sent
[08:22:57] Thank you for your contribution to Folding@Home.
[08:22:57] + Number of Units Completed: 36
[08:22:59] Trying to send all finished work units
[08:22:59] + No unsent completed units remaining.
[08:22:59] - Preparing to get new work unit...
[08:22:59] Cleaning up work directory
[08:22:59] + Attempting to get work packet
[08:22:59] Passkey found
[08:22:59] - Will indicate memory of 32233 MB
[08:22:59] - Connecting to assignment server
[08:22:59] Connecting to [URL]http://assign.stanford.edu:8080/[/URL]
[08:23:01] Posted data.
[08:23:01] Initial: 8F80; - Successful: assigned to (128.143.199.96).
[08:23:01] + News From Folding@Home: Welcome to Folding@Home
[08:23:01] Loaded queue successfully.
[08:23:01] Sent data
[08:23:01] Connecting to [URL]http://128.143.199.96:8080/[/URL]
[08:23:03] Posted data.
[08:23:03] Initial: 0000; - Receiving payload (expected size: 3794057)
[08:23:13] - Downloaded at ~370 kB/s
[08:23:13] - Averaged speed for that direction ~412 kB/s
[08:23:13] + Received work.
[08:23:13] Trying to send all finished work units
[08:23:13] + No unsent completed units remaining.
[08:23:13] + Closed connections
[08:23:13]
[08:23:13] + Processing work unit
[08:23:13] Core required: FahCore_a3.exe
[08:23:13] Core found.
[08:23:13] Working on queue slot 01 [April 2 08:23:13 UTC]
[08:23:13] + Working ...
[08:23:13] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 01 -np 64 -checkpoint 3 -verbose -lifeline 36773 -version 634'
[08:23:13]
[08:23:13] *------------------------------*
[08:23:13] Folding@Home Gromacs SMP Core
[08:23:13] Version 2.27 (Dec. 15, 2010)
[08:23:13]
[08:23:13] Preparing to commence simulation
[08:23:13] - Looking at optimizations...
[08:23:13] - Created dyn
[08:23:13] - Files status OK
[08:23:13] - Expanded 3793545 -> 4166140 (decompressed 109.8 percent)
[08:23:13] Called DecompressByteArray: compressed_data_size=3793545 data_size=4166140, decompressed_data_size=4166140 diff=0
[08:23:13] - Digital signature verified
[08:23:13]
[08:23:13] Project: 8553 (Run 0, Clone 7, Gen 82)
[08:23:13]
[08:23:13] Assembly optimizations on if available.
[08:23:13] Entering M.D.
[08:23:20] Mapping NT from 64 to 64
[08:23:21] Completed 0 out of 500000 steps (0%)
[08:26:30] Completed 5000 out of 500000 steps (1%)
[08:29:31] Completed 10000 out of 500000 steps (2%)[/QUOTE]
Code:
[QUOTE][07:48:53] Completed 247500 out of 250000 steps (99%)
[07:57:54] Completed 250000 out of 250000 steps (100%)
[07:58:06] DynamicWrapper: Finished Work Unit: sleep=10000
[07:58:16]
[07:58:16] Finished Work Unit:
[07:58:16] - Reading up to 64407792 from "work/wudata_04.trr": Read 64407792
[07:58:17] trr file hash check passed.
[07:58:17] - Reading up to 31625784 from "work/wudata_04.xtc": Read 31625784
[07:58:17] xtc file hash check passed.
[07:58:17] edr file hash check passed.
[07:58:17] logfile size: 205550
[07:58:17] Leaving Run
[07:58:20] - Writing 96400002 bytes of core data to disk...
[07:58:44] Done: 96399490 -> 91633528 (compressed to 5.9 percent)
[07:58:44] ... Done.
[07:58:49] - Shutting down core
[07:58:49]
[07:58:49] Folding@home Core Shutdown: FINISHED_UNIT
[07:58:50] CoreStatus = 64 (100)
[07:58:50] Unit 4 finished with 84 percent of time to deadline remaining.
[07:58:50] Updated performance fraction: 0.881645
[07:58:50] Sending work to server
[07:58:50] Project: 8103 (Run 1, Clone 39, Gen 38)
[07:58:50] + Attempting to send results [April 2 07:58:50 UTC]
[07:58:50] - Reading file work/wuresults_04.dat from core
[07:58:50] (Read 91634040 bytes from disk)
[07:58:50] Connecting to [URL]http://128.143.231.201:8080/[/URL]
[08:01:30] Posted data.
[08:01:30] Initial: 0000; - Uploaded at ~559 kB/s
[08:01:30] - Averaged speed for that direction ~539 kB/s
[08:01:30] + Results successfully sent
[08:01:30] Thank you for your contribution to Folding@Home.
[08:01:30] + Number of Units Completed: 279
[08:01:31] Trying to send all finished work units
[08:01:31] + No unsent completed units remaining.
[08:01:31] - Preparing to get new work unit...
[08:01:31] Cleaning up work directory
[08:01:31] + Attempting to get work packet
[08:01:31] Passkey found
[08:01:31] - Will indicate memory of 32217 MB
[08:01:31] - Connecting to assignment server
[08:01:31] Connecting to [URL]http://assign.stanford.edu:8080/[/URL]
[08:01:32] Posted data.
[08:01:32] Initial: 8F80; - Successful: assigned to (128.143.199.96).
[08:01:32] + News From Folding@Home: Welcome to Folding@Home
[08:01:32] Loaded queue successfully.
[08:01:32] Sent data
[08:01:32] Connecting to [URL]http://128.143.199.96:8080/[/URL]
[08:01:33] Posted data.
[08:01:33] Initial: 0000; - Receiving payload (expected size: 1765302)
[08:01:38] - Downloaded at ~344 kB/s
[08:01:38] - Averaged speed for that direction ~448 kB/s
[08:01:38] + Received work.
[08:01:38] Trying to send all finished work units
[08:01:38] + No unsent completed units remaining.
[08:01:38] + Closed connections
[08:01:38]
[08:01:38] + Processing work unit
[08:01:38] Core required: FahCore_a3.exe
[08:01:38] Core found.
[08:01:38] Working on queue slot 05 [April 2 08:01:38 UTC]
[08:01:38] + Working ...
[08:01:38] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 64 -checkpoint 3 -verbose -lifeline 2089 -version 634'
[08:01:38]
[08:01:38] *------------------------------*
[08:01:38] Folding@Home Gromacs SMP Core
[08:01:38] Version 2.27 (Dec. 15, 2010)
[08:01:38]
[08:01:38] Preparing to commence simulation
[08:01:38] - Looking at optimizations...
[08:01:38] - Created dyn
[08:01:38] - Files status OK
[08:01:39] - Expanded 1764790 -> 1946416 (decompressed 110.2 percent)
[08:01:39] Called DecompressByteArray: compressed_data_size=1764790 data_size=1946416, decompressed_data_size=1946416 diff=0
[08:01:39] - Digital signature verified
[08:01:39]
[08:01:39] Project: 6946 (Run 0, Clone 160, Gen 235)
[08:01:39]
[08:01:39] Assembly optimizations on if available.
[08:01:39] Entering M.D.
[08:01:45] Mapping NT from 64 to 64
[08:01:45] Completed 0 out of 500000 steps (0%)
[08:02:34] Completed 5000 out of 500000 steps (1%)
[08:03:22] Completed 10000 out of 500000 steps (2%)[/QUOTE]Looks like this is going to be one of those days, number 3 is Project 6099:
Code:
[QUOTE][10:27:14] Completed 247500 out of 250000 steps (99%)
[10:36:10] Completed 250000 out of 250000 steps (100%)
[10:36:23] DynamicWrapper: Finished Work Unit: sleep=10000
[10:36:33]
[10:36:33] Finished Work Unit:
[10:36:33] - Reading up to 64340496 from "work/wudata_08.trr": Read 64340496
[10:36:33] trr file hash check passed.
[10:36:33] - Reading up to 31554660 from "work/wudata_08.xtc": Read 31554660
[10:36:33] xtc file hash check passed.
[10:36:33] edr file hash check passed.
[10:36:33] logfile size: 208274
[10:36:33] Leaving Run
[10:36:36] - Writing 96264306 bytes of core data to disk...
[10:36:51] Done: 96263794 -> 91522771 (compressed to 5.8 percent)
[10:36:51] ... Done.
[10:37:05] - Shutting down core
[10:37:05]
[10:37:05] Folding@home Core Shutdown: FINISHED_UNIT
[10:37:07] CoreStatus = 64 (100)
[10:37:07] Unit 8 finished with 83 percent of time to deadline remaining.
[10:37:07] Updated performance fraction: 0.911233
[10:37:07] Sending work to server
[10:37:07] Project: 8101 (Run 5, Clone 6, Gen 157)
[10:37:07] + Attempting to send results [April 2 10:37:07 UTC]
[10:37:07] - Reading file work/wuresults_08.dat from core
[10:37:07] (Read 91523283 bytes from disk)
[10:37:07] Connecting to http://128.143.231.201:8080/
[10:39:45] Posted data.
[10:39:45] Initial: 0000; - Uploaded at ~565 kB/s
[10:39:45] - Averaged speed for that direction ~529 kB/s
[10:39:45] + Results successfully sent
[10:39:45] Thank you for your contribution to Folding@Home.
[10:39:45] + Number of Units Completed: 437
[10:39:50] Trying to send all finished work units
[10:39:50] + No unsent completed units remaining.
[10:39:50] - Preparing to get new work unit...
[10:39:50] Cleaning up work directory
[10:39:52] + Attempting to get work packet
[10:39:52] Passkey found
[10:39:52] - Will indicate memory of 64526 MB
[10:39:52] - Connecting to assignment server
[10:39:52] Connecting to http://assign.stanford.edu:8080/
[10:43:02] - Couldn't send HTTP request to server
[10:43:02] + Could not connect to Assignment Server
[10:43:02] Connecting to http://assign2.stanford.edu:80/
[10:43:04] Posted data.
[10:43:04] Initial: 8F80; - Successful: assigned to (128.143.231.202).
[10:43:04] + News From Folding@Home: Welcome to Folding@Home
[10:43:04] Loaded queue successfully.
[10:43:04] Sent data
[10:43:04] Connecting to http://128.143.231.202:80/
[10:43:06] Posted data.
[10:43:06] Initial: 0000; - Receiving payload (expected size: 3814049)
[10:43:13] - Downloaded at ~532 kB/s
[10:43:13] - Averaged speed for that direction ~393 kB/s
[10:43:13] + Received work.
[10:43:13] Trying to send all finished work units
[10:43:13] + No unsent completed units remaining.
[10:43:13] + Closed connections
[10:43:13]
[10:43:13] + Processing work unit
[10:43:13] Core required: FahCore_a3.exe
[10:43:13] Core found.
[10:43:13] Working on queue slot 09 [April 2 10:43:13 UTC]
[10:43:13] + Working ...
[10:43:13] - Calling './FahCore_a3.exe -dir work/ -nice 19 -suffix 09 -np 64 -checkpoint 3 -verbose -lifeline 2450 -version 634'
[10:43:13]
[10:43:13] *------------------------------*
[10:43:13] Folding@Home Gromacs SMP Core
[10:43:13] Version 2.27 (Dec. 15, 2010)
[10:43:13]
[10:43:13] Preparing to commence simulation
[10:43:13] - Looking at optimizations...
[10:43:13] - Created dyn
[10:43:13] - Files status OK
[10:43:13] - Expanded 3813537 -> 4169428 (decompressed 109.3 percent)
[10:43:13] Called DecompressByteArray: compressed_data_size=3813537 data_size=4169428, decompressed_data_size=4169428 diff=0
[10:43:13] - Digital signature verified
[10:43:13]
[10:43:13] Project: 6099 (Run 5, Clone 43, Gen 438)
[10:43:13]
[10:43:13] Assembly optimizations on if available.
[10:43:13] Entering M.D.
[10:43:19] Mapping NT from 64 to 64
[10:43:21] Completed 0 out of 500000 steps (0%)
[10:44:57] Completed 5000 out of 500000 steps (1%)
[10:46:27] Completed 10000 out of 500000 steps (2%)
[10:47:57] Completed 15000 out of 500000 steps (3%)
[10:49:26] Completed 20000 out of 500000 steps (4%)
[10:50:55] Completed 25000 out of 500000 steps (5%)[/QUOTE]
Last edited:
I connected to the same server about 3 hour ago, so I think you must have a local problem. If the problem continue, try to reset the client.
Code:
[QUOTE][10:12:47] Thank you for your contribution to Folding@Home.
[10:12:47] + Number of Units Completed: 447
[10:12:47] - Preparing to get new work unit...
[10:12:47] Cleaning up work directory
[10:12:47] + Attempting to get work packet
[10:12:47] Passkey found
[10:12:47] - Connecting to assignment server
[10:12:47] Connecting to http://assign.stanford.edu:8080/
[10:12:48] - Successful: assigned to (128.143.231.201).
[10:12:48] + News From Folding@Home: Welcome to Folding@Home
[10:12:48] Loaded queue successfully.
[10:12:48] Connecting to http://128.143.231.201:8080/
[10:13:56] + Received work.
[10:13:56] + Closed connections
[10:13:56]
[10:13:56] + Processing work unit
[10:13:56] Core required: FahCore_a5.exe
[10:13:56] Core found.
[10:13:56] Working on queue slot 09 [April 4 10:13:56 UTC]
[10:13:56] + Working ...
[10:13:56]
[10:13:56] *------------------------------*
[10:13:56] Folding@Home Gromacs SMP Core
[10:13:56] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[10:13:56]
[10:13:56] Preparing to commence simulation
[10:13:56] - Looking at optimizations...
[10:13:56] - Created dyn
[10:13:56] - Files status OK
[10:13:59] - Expanded 30334799 -> 33163648 (decompressed 109.3 percent)
[10:13:59] Called DecompressByteArray: compressed_data_size=30334799 data_size=33163648, decompressed_data_size=33163648 diff=0
[10:13:59] - Digital signature verified
[10:13:59]
[10:13:59] Project: 8103 (Run 0, Clone 10, Gen 52)
[10:13:59]
[10:13:59] Assembly optimizations on if available.
[10:13:59] Entering M.D.
[10:14:05] Mapping NT from 64 to 64
[10:14:09] Completed 0 out of 250000 steps (0%)
[10:21:36] Completed 2500 out of 250000 steps (1%)
[10:28:48] Completed 5000 out of 250000 steps (2%)
[10:36:01] Completed 7500 out of 250000 steps (3%)
[10:43:12] Completed 10000 out of 250000 steps (4%)
[10:50:25] Completed 12500 out of 250000 steps (5%)[/QUOTE]Bevor these 7 WU´s I´ve done a reset five times - after every 810x was comming a smp unit.
After every reset (including delete machinedependent.dat, queue.dat and work-folder) the results and the points from every WU have been deleted too.
If I reset the client again, the WU´s and Points deleted once more.
Should I really do this? No other fix for the problem?
Arghhh --- how can I get the text in a box to scroll???
After every reset (including delete machinedependent.dat, queue.dat and work-folder) the results and the points from every WU have been deleted too.
If I reset the client again, the WU´s and Points deleted once more.
Should I really do this? No other fix for the problem?
Arghhh --- how can I get the text in a box to scroll???
Code:
[17:48:45] Completed 185000 out of 500000 steps (37%)
[17:51:33] - Autosending finished units... [April 4 17:51:33 UTC]
[17:51:33] Trying to send all finished work units
[17:51:33] Project: 8101 (Run 6, Clone 5, Gen 225)
[17:51:33] + Attempting to send results [April 4 17:51:33 UTC]
[17:51:33] - Reading file work/wuresults_01.dat from core
[17:51:33] (Read 91576788 bytes from disk)
[17:51:33] Connecting to [url]http://128.143.231.201:8080/[/url]
[17:51:33] - Couldn't send HTTP request to server
[17:51:33] + Could not connect to Work Server (results)
[17:51:33] (128.143.231.201:8080)
[17:51:33] + Retrying using alternative port
[17:51:33] Connecting to [url]http://128.143.231.201:80/[/url]
[17:51:33] - Couldn't send HTTP request to server
[17:51:33] + Could not connect to Work Server (results)
[17:51:33] (128.143.231.201:80)
[17:51:33] - Error: Could not transmit unit 01 (completed April 3) to work server.
[17:51:33] - 20 failed uploads of this unit.
[17:51:33] + Attempting to send results [April 4 17:51:33 UTC]
[17:51:33] - Reading file work/wuresults_01.dat from core
[17:51:33] (Read 91576788 bytes from disk)
[17:51:33] Connecting to [url]http://128.143.199.97:8080/[/url]
[17:51:33] - Couldn't send HTTP request to server
[17:51:33] + Could not connect to Work Server (results)
[17:51:33] (128.143.199.97:8080)
[17:51:33] + Retrying using alternative port
[17:51:33] Connecting to [url]http://128.143.199.97:80/[/url]
[17:51:33] - Couldn't send HTTP request to server
[17:51:33] + Could not connect to Work Server (results)
[17:51:33] (128.143.199.97:80)
[17:51:33] Could not transmit unit 01 to Collection server; keeping in queue.
[17:51:33] Project: 8554 (Run 0, Clone 8, Gen 87)
[17:51:33] + Attempting to send results [April 4 17:51:33 UTC]
[17:51:33] - Reading file work/wuresults_02.dat from core
[17:51:33] (Read 7477367 bytes from disk)
[17:51:33] Connecting to [url]http://128.143.199.96:8080/[/url]
[17:51:33] - Couldn't send HTTP request to server
[17:51:33] + Could not connect to Work Server (results)
[17:51:33] (128.143.199.96:8080)
[17:51:33] + Retrying using alternative port
[17:51:33] Connecting to [url]http://128.143.199.96:80/[/url]
[17:51:33] - Couldn't send HTTP request to server
[17:51:33] + Could not connect to Work Server (results)
[17:51:33] (128.143.199.96:80)
[17:51:33] - Error: Could not transmit unit 02 (completed April 3) to work server.
[17:51:33] - 17 failed uploads of this unit.
[17:51:33] + Attempting to send results [April 4 17:51:33 UTC]
[17:51:33] - Reading file work/wuresults_02.dat from core
[17:51:33] (Read 7477367 bytes from disk)
[17:51:33] Connecting to [url]http://128.143.231.201:8080/[/url]
[17:51:33] - Couldn't send HTTP request to server
[17:51:33] + Could not connect to Work Server (results)
[17:51:33] (128.143.231.201:8080)
[17:51:33] + Retrying using alternative port
[17:51:33] Connecting to [url]http://128.143.231.201:80/[/url]
[17:51:33] - Couldn't send HTTP request to server
[17:51:33] + Could not connect to Work Server (results)
[17:51:33] (128.143.231.201:80)
[17:51:33] Could not transmit unit 02 to Collection server; keeping in queue.
[17:51:33] Project: 8563 (Run 0, Clone 4, Gen 83)
[17:51:33] + Attempting to send results [April 4 17:51:33 UTC]
[17:51:33] - Reading file work/wuresults_03.dat from core
[17:51:33] (Read 7477191 bytes from disk)
[17:51:33] Connecting to [url]http://128.143.199.96:8080/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.199.96:8080)
[17:51:34] + Retrying using alternative port
[17:51:34] Connecting to [url]http://128.143.199.96:80/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.199.96:80)
[17:51:34] - Error: Could not transmit unit 03 (completed April 3) to work server.
[17:51:34] - 14 failed uploads of this unit.
[17:51:34] + Attempting to send results [April 4 17:51:34 UTC]
[17:51:34] - Reading file work/wuresults_03.dat from core
[17:51:34] (Read 7477191 bytes from disk)
[17:51:34] Connecting to [url]http://128.143.231.201:8080/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.231.201:8080)
[17:51:34] + Retrying using alternative port
[17:51:34] Connecting to [url]http://128.143.231.201:80/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.231.201:80)
[17:51:34] Could not transmit unit 03 to Collection server; keeping in queue.
[17:51:34] Project: 6944 (Run 0, Clone 224, Gen 196)
[17:51:34] + Attempting to send results [April 4 17:51:34 UTC]
[17:51:34] - Reading file work/wuresults_04.dat from core
[17:51:34] (Read 3521316 bytes from disk)
[17:51:34] Connecting to [url]http://128.143.199.96:8080/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.199.96:8080)
[17:51:34] + Retrying using alternative port
[17:51:34] Connecting to [url]http://128.143.199.96:80/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.199.96:80)
[17:51:34] - Error: Could not transmit unit 04 (completed April 3) to work server.
[17:51:34] - 12 failed uploads of this unit.
[17:51:34] + Attempting to send results [April 4 17:51:34 UTC]
[17:51:34] - Reading file work/wuresults_04.dat from core
[17:51:34] (Read 3521316 bytes from disk)
[17:51:34] Connecting to [url]http://128.143.231.201:8080/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.231.201:8080)
[17:51:34] + Retrying using alternative port
[17:51:34] Connecting to [url]http://128.143.231.201:80/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.231.201:80)
[17:51:34] Could not transmit unit 04 to Collection server; keeping in queue.
[17:51:34] Project: 8560 (Run 0, Clone 4, Gen 97)
[17:51:34] + Attempting to send results [April 4 17:51:34 UTC]
[17:51:34] - Reading file work/wuresults_05.dat from core
[17:51:34] (Read 7477172 bytes from disk)
[17:51:34] Connecting to [url]http://128.143.199.96:8080/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.199.96:8080)
[17:51:34] + Retrying using alternative port
[17:51:34] Connecting to [url]http://128.143.199.96:80/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.199.96:80)
[17:51:34] - Error: Could not transmit unit 05 (completed April 3) to work server.
[17:51:34] - 9 failed uploads of this unit.
[17:51:34] + Attempting to send results [April 4 17:51:34 UTC]
[17:51:34] - Reading file work/wuresults_05.dat from core
[17:51:34] (Read 7477172 bytes from disk)
[17:51:34] Connecting to [url]http://128.143.231.201:8080/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.231.201:8080)
[17:51:34] + Retrying using alternative port
[17:51:34] Connecting to [url]http://128.143.231.201:80/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.231.201:80)
[17:51:34] Could not transmit unit 05 to Collection server; keeping in queue.
[17:51:34] Project: 8101 (Run 15, Clone 3, Gen 149)
[17:51:34] + Attempting to send results [April 4 17:51:34 UTC]
[17:51:34] - Reading file work/wuresults_06.dat from core
[17:51:34] (Read 91633279 bytes from disk)
[17:51:34] Connecting to [url]http://128.143.231.201:8080/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.231.201:8080)
[17:51:34] + Retrying using alternative port
[17:51:34] Connecting to [url]http://128.143.231.201:80/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.231.201:80)
[17:51:34] - Error: Could not transmit unit 06 (completed April 4) to work server.
[17:51:34] - 4 failed uploads of this unit.
[17:51:34] + Attempting to send results [April 4 17:51:34 UTC]
[17:51:34] - Reading file work/wuresults_06.dat from core
[17:51:34] (Read 91633279 bytes from disk)
[17:51:34] Connecting to [url]http://128.143.199.97:8080/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.199.97:8080)
[17:51:34] + Retrying using alternative port
[17:51:34] Connecting to [url]http://128.143.199.97:80/[/url]
[17:51:34] - Couldn't send HTTP request to server
[17:51:34] + Could not connect to Work Server (results)
[17:51:34] (128.143.199.97:80)
[17:51:34] Could not transmit unit 06 to Collection server; keeping in queue.
[17:51:34] + Sent 0 of 6 completed units to the server
[17:51:34] - Autosend completed
[17:51:43] Completed 190000 out of 500000 steps (38%)
Last edited:
You told me earlier that you are using Langouste. That means that the common log FAHlog.txt will not show the up and download. This will only be seen in the second terminal that shows communication with the servers. So my guess is that thing is working normal for your servers, but I could ofcourse be wrong. Can you check this very carefully again. You must look in the second terminal and there you will see the amount of MB that has been going up and down.
The Code sign is like this: # in the menu.
Code:
You can make the windows scroll by using Code around the text you will want to scroll in.When you use langouste, and have it configured correct, Ubuntu will start 2 terminals (windows).
Uploaded with ImageShack.us
Uploaded with ImageShack.us