ok, I've got the following parts:
PCP&C 750W Silencer
i7 920
ECS X58B-A rev1
Corsair Dominator 3x2Gb 1600Mhz TR3X6G1600C8D
Sapphire 4890 2Gb Vapor X
Seagate 160gb HD
Samsung DVD Burner
Right now I have it sitting on a box outside of the case to eliminate any grounding issues. The only way so far i've been able to get it working is to put 1 stick of RAM in the farthest slot away from the CPU, and clearing the CMOS.
Once I do this, it will boot, and then it will show an error message that I don't have a hard drive, but then when I go into the BIOS, it shows my HD on SATA 1. But sadly, this isn't my problem I don't think because when i hit F10 to save & restart, it basically goes into an endless boot, reboot cycle, ultimately the little POST display LED's land on 00 & AA which from what i've read online indicates everything is working normal (but in this "normal" state nothign is displayed on my screen)
When i power down & try to power on after this, the POST display ends up displaying 85
I can't for the life of me figure out what the damn problem is. Originally I had some Chaintech Apogee 1866 memory, but the voltage on that was pretty high and i thought that could've been the problem. This Corsair stuff was supposed to be my fix but it doesn't appear so
ALso, i've tried setting the ram speed manually in the bios to both 1333 and 1600 (as well as setting the uclock to 2666 and 3200) and that didn't work either
Any help you guys could be on this would be appreciated!!!
PCP&C 750W Silencer
i7 920
ECS X58B-A rev1
Corsair Dominator 3x2Gb 1600Mhz TR3X6G1600C8D
Sapphire 4890 2Gb Vapor X
Seagate 160gb HD
Samsung DVD Burner
Right now I have it sitting on a box outside of the case to eliminate any grounding issues. The only way so far i've been able to get it working is to put 1 stick of RAM in the farthest slot away from the CPU, and clearing the CMOS.
Once I do this, it will boot, and then it will show an error message that I don't have a hard drive, but then when I go into the BIOS, it shows my HD on SATA 1. But sadly, this isn't my problem I don't think because when i hit F10 to save & restart, it basically goes into an endless boot, reboot cycle, ultimately the little POST display LED's land on 00 & AA which from what i've read online indicates everything is working normal (but in this "normal" state nothign is displayed on my screen)
When i power down & try to power on after this, the POST display ends up displaying 85
I can't for the life of me figure out what the damn problem is. Originally I had some Chaintech Apogee 1866 memory, but the voltage on that was pretty high and i thought that could've been the problem. This Corsair stuff was supposed to be my fix but it doesn't appear so
ALso, i've tried setting the ram speed manually in the bios to both 1333 and 1600 (as well as setting the uclock to 2666 and 3200) and that didn't work either
Any help you guys could be on this would be appreciated!!!
Last edited: