New SATA drives not found until forcing Intel Matrix scan..

Dew itt right

2[H]4U
Joined
Oct 28, 2005
Messages
3,314
Ever since I got my new motherboard (system in sig), SATA drives have lost much of their plug-and-play allure. I clone my system drive to a backup drive regularly and I also plug in other peoples drive for repair quite frequently so I'm constantly plugging-in and unplugging SATA drives. But now with this new board, drives plugged in won't be found until I either reboot the PC or open Intel's Matrix Storage program and force it to rescan for plug-and-play devices. Am I missing some BIOS setting? I've tried in both Vista Ultimate and Windows 7 RC and it's the same scenario for both.

Any suggestions would be much appreciated...
 
Did you make sure the BIOS has the controller set to AHCI mode instead of Legacy or IDE?
 
BIOS controller is set to RAID. My previous drive config was 2 Caviar Blacks in RAID.I'll soon be adding another SSD to this one to have my RAID array back so it's got to stay there on RAID. I've always had it set there on previous setups and this problem has never existed...
 
I have two eSATA drives, the intel sata interfaces are brought to the PCI brackets with adapters. The intel controller has never been plug and play, auto detected like USB devices are. Always have had to do a scan for new hardware to detect new drives.
 
Back
Top