specs:
antec nsk2400
xclio 500w goodpower
4000+ brisbane
2 x 1gb patriot 4-4-4-12 ddr2 800
foxconn A690GM2MA-8KRS2H
2 x 36gig raptors
following issues:
#1. cant figure out how to do raid 0. couldnt find anything in the bios, and when i loaded the raid drivers in the windows install it just asked which i wanted to install windows on. I have never done raid so i might be forgetting something.
#2. HDD light is always on. i turn on the comp and its off, after post when it begins to load windows it looks like it should, starting and flickering like a hdd in use, but as soon as the splash screen comes on it stays on constantly.
#3. memory speed. in the bios there are the following settings for ram speed: 200, 266, 333, 400. I dont know which i should be using, default was 200, should it be 800? in the cpuz memory tab it shows 367mhz for ram speed with the bus at 210mhz and mem at a cpu/6 divider.
any help appreciated.
antec nsk2400
xclio 500w goodpower
4000+ brisbane
2 x 1gb patriot 4-4-4-12 ddr2 800
foxconn A690GM2MA-8KRS2H
2 x 36gig raptors
following issues:
#1. cant figure out how to do raid 0. couldnt find anything in the bios, and when i loaded the raid drivers in the windows install it just asked which i wanted to install windows on. I have never done raid so i might be forgetting something.
#2. HDD light is always on. i turn on the comp and its off, after post when it begins to load windows it looks like it should, starting and flickering like a hdd in use, but as soon as the splash screen comes on it stays on constantly.
#3. memory speed. in the bios there are the following settings for ram speed: 200, 266, 333, 400. I dont know which i should be using, default was 200, should it be 800? in the cpuz memory tab it shows 367mhz for ram speed with the bus at 210mhz and mem at a cpu/6 divider.
any help appreciated.